Home DIYRC AccessoriesMotor AccessoriesCarbon Brushes
Harfington Carbon Brushes 0.79x0.2x0.16 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack

Carbon Brushes 0.79x0.2x0.16 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack

ID:1341991
ID:1341991
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
  • Package Content: 2pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x5x4mm/ 0.79x0.2x0.16 inch
  • The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
  • The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
  • Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
About this item
  • The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
  • Package Content: 2pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x5x4mm/ 0.79x0.2x0.16 inch
  • The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
  • The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
  • Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
What is this?
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.

What will I get?
Package Content: 2pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x5x4mm/ 0.79x0.2x0.16 inch

Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.

How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.

What should  I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
US$5.40 Regular price
US/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • Ship from the US
  • In stock, dispatch in 24 hours.
Cart
Cart
Free Shipping over US$30
30 Day Free Return

Product Variants

Products Title ID Price Qty
Carbon Brushes 0.79x0.2x0.16 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341991 US$5.40
Products Title ID Price Qty
Carbon Brushes 0.79x0.2x0.16 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341991 US$5.40
Carbon Brushes 0.6x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342006 US$5.91
Carbon Brushes 0.71x0.43x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342010 US$5.44
Carbon Brushes 0.79x0.24x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack 1342023 US$6.57
Carbon Brushes 0.63x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341996 US$5.40
Carbon Brushes 0.55x0.16x0.16 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342004 US$5.60
Carbon Brushes 0.98x0.63x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342011 US$6.38
Carbon Brushes 0.51x0.31x0.2 Inch Round Top for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342013 US$5.40
Carbon Brushes 0.79x0.47x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342019 US$5.52
Carbon Brushes 0.98x0.63x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342028 US$5.60
Carbon Brushes 0.71x0.43x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342015 US$6.06
Carbon Brushes 0.79x0.28x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342020 US$5.40
Carbon Brushes 0.51x0.31x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342027 US$5.40
Carbon Brushes 1.26x0.43x0.25 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342029 US$5.83
Carbon Brushes 0.79x0.39x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342003 US$5.44
Carbon Brushes 0.75x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342021 US$5.40
Carbon Brushes 0.79x0.24x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342022 US$5.60
Carbon Brushes 1.26x0.43x0.25 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342024 US$6.65
Carbon Brushes 0.87x0.35x0.14 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack 1342025 US$6.57
Carbon Brushes 0.79x0.2x0.16 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1348018 US$5.61
Carbon Brushes 0.75x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342001 US$5.60
Carbon Brushes 0.79x0.28x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342007 US$5.68
Carbon Brushes 0.79x0.39x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342008 US$6.06
Carbon Brushes 0.79x0.31x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342016 US$5.68
Carbon Brushes 0.79x0.31x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1342026 US$5.40
Carbon Brushes 0.79x0.47x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1342017 US$6.22
Qty: 0 Item(s)
Total Price: US$0.00

Description

Description

What is this?
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.

What will I get?
Package Content: 2pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x5x4mm/ 0.79x0.2x0.16 inch

Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.

How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.

What should  I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the US over US$30
Estimated shipping time will be within 6-14 days
  • Standard Shipping:

    US$4.99 for order under US$30.00

    Free shipping on order over US$30

    Estimated shipping time will be within 6-14 days

  • UPS Air Express:

    US$49.99 for order under US$200.00

    Estimated shipping time will be within 4-8 days

  • Air Express:

    Free shipping on order over US$200

    Estimated shipping time will be within 7-10 days

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Carbon Brushes 0.79x0.2x0.16 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack

US$5.40