Carbon Brushes 0.63x0.51x3.78 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack

Home DIYRC AccessoriesMotor AccessoriesCarbon Brushes

/ 0

Wholesale Price

20%OFF

Order $5000+

20%OFF
Order $5000+
15%OFF
Order $2000+
10%OFF
Order $800+
7%OFF
Order $500+
5%OFF
Order $200+

About this item

The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
Package Content: 10pcs Motor Carbon Brushes; Total Length: 40mm/ 1.57 inch; Carbon Brush Size(LxWxH): 16x13x6mm/ 0.63x0.51x3.78 inch
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.

About this item

The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
Package Content: 10pcs Motor Carbon Brushes; Total Length: 40mm/ 1.57 inch; Carbon Brush Size(LxWxH): 16x13x6mm/ 0.63x0.51x3.78 inch
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.

Inquiry submitted successfully

We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!

Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.

Product Description:

What is this?
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.

What will I get?
Package Content: 10pcs Motor Carbon Brushes; Total Length: 40mm/ 1.57 inch; Carbon Brush Size(LxWxH): 16x13x6mm/ 0.63x0.51x3.78 inch

Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.

How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.

What should I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.

US$6.41

Wholesale Price

20%OFF

Order $5000+

20%OFF
Order $5000+
15%OFF
Order $2000+
10%OFF
Order $800+
7%OFF
Order $500+
5%OFF
Order $200+

Qty:

Ship from the US
In stock, dispatch in 24 hours.

Cart

[{"id":43667874545913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"a22092100ux0073","requires_shipping":true,"taxable":true,"featured_image":{"id":47106465562873,"product_id":7878579421433,"position":1,"created_at":"2025-05-21T13:59:24+08:00","updated_at":"2025-05-21T13:59:24+08:00","alt":null,"width":1600,"height":1600,"src":"\/\/www.harfington.com\/cdn\/shop\/files\/ux_a22092100ux0073_ux_g03.jpg?v=1747807164","variant_ids":[43667874545913]},"available":true,"name":"Carbon Brushes 0.63x0.51x3.78 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack","public_title":null,"options":["Default Title"],"price":641,"weight":51,"compare_at_price":0,"inventory_management":"shopify","barcode":"723115013214","featured_media":{"alt":null,"id":37809165861113,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.harfington.com\/cdn\/shop\/files\/ux_a22092100ux0073_ux_g03.jpg?v=1747807164"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}]

Free Shipping over US$30

30 Day Free Return

Product Variants

Products	Title	ID	Price	Qty
	Carbon Brushes 0.63x0.51x3.78 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack	1350751	US$6.41

Title	ID	Price
Carbon Brushes 0.63x0.51x3.78 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack	1350751	US$6.41
Uxcell Carbon Brushes for Electric Motors 16mm x 12.5mm x 6.5mm Replacement Repair Part 4Pcs	1113180	US$6.08
Uxcell Carbon Brushes for Electric Motors 12mm x 8mm x 5mm Replacement Repair Part Set of 10	1003378	US$6.59
Carbon Brushes 0.55x0.3x3.58 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack	1341978	US$5.40
Carbon Brushes 0.51x0.31x2.81 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 20 Pack	1341984	US$6.57
Carbon Brushes 0.67x0.43x4.69 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341990	US$5.77
Carbon Brushes 0.51x0.35x3.07 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack	1341999	US$6.18
Carbon Brushes 0.67x0.43x3.35 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack	1342002	US$6.38
Uxcell Carbon Brushes for Electric Motors 13mm x 6mm x 4mm Replacement Repair Part Set of 10	1113179	US$6.67
Uxcell Carbon Brushes for Electric Motors 13mm x 7.5mm x 6.5mm Replacement Repair Part Set of 10	1097594	US$6.94
Carbon Brushes 0.4x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 20 Pack	1341966	US$6.92
Carbon Brushes 0.55x0.31x2.48 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack	1341969	US$5.40
Carbon Brushes 0.55x0.3x3.58 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341970	US$5.40
Carbon Brushes 0.47x0.31x2.36 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341977	US$5.40
Carbon Brushes 0.51x0.24x2.05 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack	1341980	US$5.40
Carbon Brushes 0.53x0.31x2.66 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341982	US$5.40
Carbon Brushes 0.51x0.31x3.07 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341993	US$5.40
Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack	1342000	US$5.99
Uxcell Carbon Brushes for Electric Motors 11mm x 5mm x 5mm Replacement Repair Part Set of 10	1093708	US$6.92
Uxcell Carbon Brushes for Electric Motors 16mm x 13mm x 6mm Replacement Repair Part Set of 2	1097593	US$5.46
Carbon Brushes 0.63x0.5x4.09 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack	1341962	US$6.38
Carbon Brushes 0.4x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 8 Pack	1341965	US$6.06
Carbon Brushes 0.51x0.24x2.05 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341968	US$5.40
Carbon Brushes 0.63x0.5x4.09 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341971	US$5.40
Carbon Brushes 0.67x0.43x3.35 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341981	US$5.40
Carbon Brushes 0.71x0.67x4.96 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack	1341985	US$5.60
Carbon Brushes 0.47x0.31x2.36 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack	1341975	US$5.40
Carbon Brushes 0.6x0.4x3.54 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack	1341989	US$6.38
Carbon Brushes 0.87x0.63x5.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack	1341983	US$5.60
Uxcell 2Pcs Carbon Brushes,for Electric Motor,14mmx8mmx5mm,Power Tool,Repair Part	1159957	US$5.29
Carbon Brushes 0.55x0.35x3.31 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack	1341964	US$5.40

Qty: 0 Item(s)

Total Price: US$0.00

Description

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Show less

Free Shipping to the US over US$30

Estimated shipping time will be within 6-14 days

Standard Shipping:

US$4.99 for order under US$30.00

Free shipping on order over US$30

Estimated shipping time will be within 6-14 days
UPS Air Express:

US$49.99 for order under US$200.00

Estimated shipping time will be within 4-8 days
Air Express:

Free shipping on order over US$200

Estimated shipping time will be within 7-10 days

30 Day Free Return

Free Return

Thank you for choosing Harfington!

We make things easy for you, you will enjoy a 30-day free return (within the US) after receiving your items!

In other regions, we do not provide pre-paid return labels and you are responsible for covering shipping costs to return.

If you are not completely satisfied with your product for any reason, we will gladly sort out a solution for you. Once you want to return or refund the order, please Contact Us and our agents will contact you in 1-2 business days.

The return process

1. Contact us

Contact our Customer Service via email info@harfington.com or website, prepare the proof of purchase and the reason of return.

For wholesale orders, please contact directly wholesale@harfington.com for faster service.

2. Return & Refund

If you decide to return an item that is not defective, you’re eligible for a 30-day unconditional return since you’ve received it. Our Customer Service team will send you an address for receiving your return items, it takes 3-5 business days to process your return and issue the refund after our warehouse received the items.

Matters needing attention

All returned items should include the following:

• Original packaging (including original box, plastics foam, bubble wrap, bags, etc.)

• Original intact UPC barcode. Removal of the UPC code voids any possibility of the return request being honored.

• All accessories, including cords, cases, transformers, parts, batteries, assembly tools, etc.

• All manufacturer instruction manuals, warranty cards, and other documents.

*Return Policy Exceptions

1.Return Shipping is free only for the first return per order.

2.If you have already returned item(s) from an order but would like to make additional returns of item(s) in the same order, you can use the Return Label we provided, and $6.99 shipping fee will be deducted from your refund.

3.For orders sent to the US and under $50, Harfington will provide the return label. For orders sent to other conturies or over $50, Harfington will not provide the return label.

4.If our warehouse detect worn, damaged, or missing on the return items, Harfington reserve the rights to cancel the refund.

5.Defective Items or Wrong Items. If you receive an item that is wrong, defective, or broken, within 30 days of the date since you’ve received it, Harfington will exchange a new item to you or 100% refund it.

6.Non-returnable Items. Some of our products are not under the service of 30-day unconditional returns. We will tag these products on the detail page and your orders.

7.Larger Items. Some items require special shipping and handling. Some larger items may require a freight carrier or may exceed the weight limits allowed, if you want to return a larger item, please contact our Customer Service.

8.For non-quality issues (such as personal reason) , customer will be responsible for paying the return shipping fees and any customs fees or duties incurred during the return process.

9.For wholesale orders According to the specific order situation, we provide different solutions. If your wholesale order is not finished production, we will cancel the order and issue a full refund. If your wholesale order has been produced and is being processed, 30%~60% of the order amount will be used as a deposit and will not be refunded. Any questions about order cancelation, please contact us.

If you have any issues with your return or refund, please contact the Customer Service team, we are happy to help!

Carbon Brushes 0.63x0.51x3.78 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack

US$6.41

Recently viewed

Uxcell 50Pcs 19mmx22mm Round Decorative Upholstery Tacks Furniture Nails, Bright Black

US$11.60

Uxcell 10 Pcs Power Tool Carbon Brushes 18 x 16 x 7mm

US$6.45

6x6 Inch Aluminum Vent Cover, Screen Air Grille Ventilation Cover HVAC Louvered Grill for Home Kitchen Fireplace Bathroom Wall Ceiling, Brown

US$10.40

10pcs Wool Buffing Pads 4 Inch Polishing Pad Polishing Buffing Pad Hook and Loop

US$11.04

Uxcell 330uF 16V Capacitor, Aluminum Electrolytic Capacitors 105C High Temp 100pcs

US$7.87

Uxcell Stainless Steel Closet Rod Bracket, 1.26" Dia Wardrobe Bracket U-Shaped Rod Socket Flange for Wardrobe Curtain Shower, White 2 Pack

US$6.67

Reset Your Password

We will send you an email to reset your password.

Email is required or invalid.

A link to reset your password has been sent to

Emails may experience a few minute delay.

lf you have not received an email, please check your junk and spam folders.

lf you still don't receive the email after requesting a password reset, wait 24 hours and try again

RETURN TO SIGN IN

Resent

Harfington Privacy Policy - What you need to know

Harfington has created this privacy statement in order to demonstrate our firm commitment to privacy and data protection. The following discloses our information gathering and dissemination practices.

This privacy policy has been compiled to better serve those who are concerned with how their 'Personally Identifiable Information' (PII) is being used online. PII, as described in US privacy law and information security, is information that can be used on its own or with other information to identify, contact, or locate a single person, or to identify an individual in context.

* Please read our privacy policy carefully to get a clear understanding of how we collect, use, protect or otherwise handle your Personally Identifiable Information in accordance with our website.

1.1 What personal information do we collect from the people that visit our blog, website or app?

When ordering or registering on our site, as appropriate, you may be asked to enter your name, email address, mailing address, phone number or other details to help you with your experience.

1.2 When do we collect information?

We collect information from you when you place an order or enter information on our site.

1.3 How do we use your information?

We may use the information we collect from you when you register, make a purchase, sign up for our newsletter, respond to a survey or marketing communication, surf the website, or use certain other site features in the following ways:

We use the information we collect in various ways, including to:

• Provide, operate, and maintain our website
• Improve, personalize, and expand our website
• Understand and analyze how you use our website
• Develop new products, services, features, and functionality
• Communicate with you, either directly or through one of our partners, including for customer service, to provide you with updates and other information relating to the website, and for marketing and promotional purposes
• Send you emails
• Find and prevent fraud

Log Files

Harfington follows a standard procedure of using log files. These files log visitors when they visit websites. All hosting companies do this and a part of hosting services' analytics. The information collected by log files include internet protocol (IP) addresses, browser type, Internet Service Provider (ISP), date and time stamp, referring/exit pages, and possibly the number of clicks. These are not linked to any information that is personally identifiable. The purpose of the information is for analyzing trends, administering the site, tracking users' movement on the website, and gathering demographic information.

1.4 How do we protect your information?

We do not use vulnerability scanning and/or scanning to PCI standards.

We only provide articles and information. We never ask for credit card numbers.

We use regular Malware Scanning.

Your personal information is contained behind secured networks and is only accessible by a limited number of persons who have special access rights to such systems, and are required to keep the information confidential. In addition, all sensitive/credit information you supply is encrypted via Secure Socket Layer (SSL) technology.

We implement a variety of security measures when a user places an order enters, submits, or accesses their information to maintain the safety of your personal information.

All transactions are processed through a gateway provider and are not stored or processed on our servers.

1.5 Do we use 'cookies'?

Yes. Cookies are small files that a site or its service provider transfers to your computer's hard drive through your Web browser (if you allow) that enables the site's or service provider's systems to recognize your browser and capture and remember certain information. For instance, we use cookies to help us remember and process the items in your shopping cart. They are also used to help us understand your preferences based on previous or current site activity, which enables us to provide you with improved services. We also use cookies to help us compile aggregate data about site traffic and site interaction so that we can offer better site experiences and tools in the future.

We use cookies to:

• Help remember and process the items in the shopping cart.
• Understand and save user's preferences for future visits.
• Keep track of advertisements.

You can choose to have your computer warn you each time a cookie is being sent, or you can choose to turn off all cookies. You do this through your browser settings. Since browser is a little different, look at your browser's Help Menu to learn the correct way to modify your cookies.

If users disable cookies in their browser:

If you turn cookies off, some features will be disabled. Some of the features that make your site experience more efficient and may not function properly.

However, you will still be able to place orders.

1.6 Third-party disclosure

We do not sell, trade, or otherwise transfer to outside parties your Personally Identifiable Information.

1.7 How does our site handle Do Not Track signals?

We honor Do Not Track signals and Do Not Track, plant cookies, or use advertising when a Do Not Track (DNT) browser mechanism is in place.

1.8 Does our site allow third-party behavioral tracking?

It's also important to note that we allow third-party behavioral tracking.

Google

Google DoubleClick DART Cookie

Google is one of a third-party vendor on our site. It also uses cookies, known as DART cookies, to serve ads to our site visitors based upon their visit to www.website.com and other sites on the internet. However, visitors may choose to decline the use of DART cookies by visiting the Google ad and content network Privacy Policy at the following URL – https://policies.google.com/technologies/ads

Google's advertising requirements can be summed up by Google's Advertising Principles. They are put in place to provide a positive experience for users.https://support.google.com/adwordspolicy/answer/1316548?hl=en

We have not enabled Google AdSense on our site but we may do so in the future.

California Consumer Privacy Act (CCPA)

If you are a resident of California, this section provides additional details about your rights granted by the CCPA.

In the last 12 months, we collected the following categories of personal information: identifiers (such as name, contact information and device identifiers); commercial information (such as items purchased); internet or other network activity information (such as browsing behavior and other usage data); location data; inferences (such as purchasing preferences); demographic data (such as gender); electronic, visual or similar information (such as customer support call information); and other personal information (such as product feedback or payment method information). For more details about the personal information we collect, please see clauses 1.1 and 1.2 above. We collect this information for the business and commercial purposes described in clause 1.3 above. We share this information with third parties described in clause 1.9 above.

Subject to certain limitations, the CCPA provides you with the right to request:

- access to details on the categories or specific pieces of personal information we collect;

- deletion any of your personal information;

- opt out of any “sale” of your personal information that may occur;

- not be discriminated against for exercising any of the above rights.

If you would like to submit a request to exercise your California privacy rights under the CCPA, you may do so by emailing us at info@harfington.com. We will verify your request using information associated with your account, including your email address. Further identification may be required.

California Online Privacy Protection Act

CalOPPA is the first state law in the nation to require commercial websites and online services to post a privacy policy. The law's reach stretches well beyond California to require any person or company in the United States (and conceivably the world) that operates websites collecting Personally Identifiable Information from California consumers to post a conspicuous privacy policy on its website stating exactly the information being collected and those individuals or companies with whom it is being shared. - See more at: http://consumercal.org/california-online-privacy-protection-act-caloppa/#sthash.0FdRbT51.dpuf

According to CalOPPA, we agree to the following:

1.Users can visit our site anonymously.

2.Once this privacy policy is created, we will add a link to it on our home page or as a minimum, on the first significant page after entering our website.

3.Our Privacy Policy link includes the word 'Privacy' and can be easily be found on the page specified above.

You will be notified of any Privacy Policy changes:

• On our Privacy Policy Page

Can change your personal information:

• By emailing us

COPPA (Children Online Privacy Protection Act)

When it comes to the collection of personal information from children under the age of 13 years old, the Children's Online Privacy Protection Act (COPPA) puts parents in control. The Federal Trade Commission, United States' consumer protection agency, enforces the COPPA Rule, which spells out what operators of websites and online services must do to protect children's privacy and safety online.

We do not specifically market to children under the age of 13 years old.

Nevada Privacy Rights

This section applies only to Nevada residents. Although we do not "sell" "covered information" of Nevada "consumers" as those terms are defined by Chapter 603A of the Nevada Revised Statutes, if you are a Nevada consumer, please go to our Privacy Center and inform us that you would like us to provide you notice in the event we should do so in the future, at which point you will have an opportunity to be verified and exercise your opt-out rights under that law. You may contact us as described below. It is your responsibility to keep your notice contact information current.

Social Media

We operate accounts and fan pages on different social media platforms (the "Social Media" ).

If you visit one of our Social Media Accounts you initiate a variety of data processing operations. Below we identify the other types of entities with whom you may interact when you visit one of our Social Media Accounts. If you do not provide us with your personal data, certain functionalities of the social networking platforms requiring such data will not be available to you or only to a limited extent.

As the owner of a Social Media Account, we can usually only see information stored in your public profile on such social media platform, and only insofar as you are logged in to your profile while visiting our Social Media Account. In addition, we may process data that you provide to us when you contact us through one of our Social Media Accounts (for example: if you create a post, or send us a private message via Facebook). If you visit one of our Social Media Accounts, the operator of the respective social network also processes your data, regardless of whether you yourself have a profile in the respective social network. The individual data processing operations and their scope differ depending on the operator.

In addition, the respective operator of the social network provides us with anonymous usage statistics, which we use to improve the user experience. We do not have access to the usage data that the operator of the social network collects to create these statistics. These data processing operations serve our legitimate interest in improving the user experience when visiting our profile in line with the target group.

For details about the collection and storage of your data as well as the type, scope and purpose of their use by the operator of the social network, please refer to the privacy policy of the respective operator:

• The privacy policy for the social network Facebook can be viewed at https://www.facebook.com/about/privacy .
• The privacy policy for the social network Instagram can be accessed at https://help.instagram.com/519522125107875 .
• The privacy policy for the social network Twitter can be found at https://twitter.com/en/privacy .
• The privacy policy for the social network YouTube can be viewed at https://www.gstatic.com/policies/privacy/pdf/20190122/f3294e95/google_privacy_policy_en_eu.pdf .
• The privacy policy for the social network Pinterest can be viewed at https://policy.pinterest.com/en/privacy-policy .
• The privacy policy for the social network Snapchat may be accessed at https://www.snap.com/en-GB/privacy/privacy-policy .
• The privacy policy for the social network TikTok may be accessed at https://www.tiktok.com/legal/privacy-policy?lang=en&appLaunch=app#privacy-eea .

You can withdraw your consent at any time with future effect and free of charge.

Fair Information Practices

The Fair Information Practices Principles form the backbone of privacy law in the United States and the concepts they include have played a significant role in the development of data protection laws around the globe. Understanding the Fair Information Practice Principles and how they should be implemented is critical to comply with the various privacy laws that protect personal information.

In order to be in line with Fair Information Practices we will take the following responsive action, should a data breach occur:

We will notify the users via in-site notification

• Within 7 business days

We also agree to the Individual Redress Principle which requires that individuals have the right to legally pursue enforceable rights against data collectors and processors who fail to adhere to the law. This principle requires not only that individuals have enforceable rights against data users, but also that individuals have recourse to courts or government agencies to investigate and/or prosecute non-compliance by data processors.

CAN SPAM Act

The CAN-SPAM Act is a law that sets the rules for commercial email, establishes requirements for commercial messages, gives recipients the right to have emails stopped from being sent to them, and spells out tough penalties for violations.

We collect your email address in order to:

• Send information, respond to inquiries, and/or other requests or questions.
• Process orders and to send information and updates pertaining to orders.
• Send you additional information related to your product and/or service.
• Market to our mailing list or continue to send emails to our clients after the original transaction has occurred.

To be in accordance with CANSPAM, we agree to the following:

• Not use false or misleading subjects or email addresses.
• Identify the message as an advertisement in some reasonable way.
• Include the physical address of our business or site headquarters.
• Monitor third-party email marketing services for compliance, if one is used.
• Honor opt-out/unsubscribe requests quickly.
• Allow users to unsubscribe by using the link at the bottom of each email.

If at any time you would like to unsubscribe from receiving future emails, you can email us at info@harfington.com and we will promptly remove you from ALL correspondence.

The EU General Data Protection Regulation 2016/679 (the "GDPR")

Harfington complies with the GDPR. Any information gathered receives double opt-in consent and can be fully removed from Harfington's database upon request.

Changes to Privacy Policy

From time to time, Harfington may change its privacy practices due to changes in relevant and applicable legal or regulatory requirements, the business or business practices of Harfington, as part of its ongoing efforts to better serve your needs, or for any other reason which Harfington in its sole discretion may deem necessary. We encourage you to review this Policy whenever you visit our Site or use our Service to view the current Privacy Policy.

Contacting Us

If there are any questions regarding this privacy policy, you may contact us using the information below.

www.Harfington.com

Email: info@harfington.com

TERMS AND CONDITIONS

OVERVIEW

Welcome to Harfington.com.This website is operated by Harfington.com team. Throughout the website, the terms “we”, “us” and “our” refer to Harfington.com team. Harfington.com offers this website/application, including all information, tools and services available from this site to you, the user, conditioned upon your acceptance of all terms, conditions, policies and notices stated here.

By visiting our site and/ or purchasing something from us, you engage in our “Service” and agree to be bound by the following terms and conditions (“TERMS AND CONDITIONS”, “Terms”), including those additional terms, conditions and policies referenced herein and/or available by hyperlink. These TERMS AND CONDITIONS apply to all users of the site, including without limitation users who are browsers, vendors, customers, merchants, and/ or contributors of content.

Please read these TERMS AND CONDITIONS carefully before accessing or using our website/application. By accessing or using any part of the site, you agree to be bound by these TERMS AND CONDITIONS. If you do not agree to all the terms and conditions of this agreement, then you may not access the website/application or use any services. If these TERMS AND CONDITIONS are considered an offer, acceptance is expressly limited to these TERMS AND CONDITIONS.

Any new features or tools which are added to the current store shall also be subject to the TERMS AND CONDITIONS. You can review the most current version of the TERMS AND CONDITIONS at any time on this page. We reserve the right to update, change or replace any part of these TERMS AND CONDITIONS by posting updates and/or changes to our website/application. It is your responsibility to check this page periodically for changes. Your continued use of or access to the website/application following the posting of any changes constitutes acceptance of those changes.

SECTION 1 - ONLINE STORE TERMS
By agreeing to these TERMS AND CONDITIONS,you may not use our products for any illegal or unauthorized purpose nor may you, in the use of the Service, violate any laws in your jurisdiction (including but not limited to copyright laws).
You must not transmit any worms or viruses or any code of a destructive nature.
A breach or violation of any of the Terms will result in an immediate termination of your Services.

SECTION 2 - GENERAL CONDITIONS
We reserve the right to refuse service to anyone for any reason at any time.
You understand that your content (not including credit card information), may be transferred unencrypted and involve (a) transmissions over various networks; and (b) changes to conform and adapt to technical requirements of connecting networks or devices. Credit card information is always encrypted during transfer over networks.
You agree not to reproduce, duplicate, copy, sell, resell or exploit any portion of the Service, use of the Service, or access to the Service or any contact on the website/application through which the service is provided, without express written permission by us.
The headings used in this agreement are included for convenience only and will not limit or otherwise affect these Terms.

SECTION 3 - ACCURACY, COMPLETENESS AND TIMELINESS OF INFORMATION
We are not responsible if information made available on this site is not accurate, complete or current. The material on this site is provided for general information only and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information. Any reliance on the material on this site is at your own risk.
This site may contain certain historical information. Historical information, necessarily, is not current and is provided for your reference only. We reserve the right to modify the contents of this site at any time, but we have no obligation to update any information on our site. You agree that it is your responsibility to monitor changes to our site.

SECTION 4 - MODIFICATIONS TO THE SERVICE AND PRICES
Prices for our products are subject to change without notice.
We reserve the right at any time to modify or discontinue the Service (or any part or content thereof) without notice at any time.
We shall not be liable to you or to any third-party for any modification, price change, suspension or discontinuance of the Service.

SECTION 5 - PRODUCTS OR SERVICES (if applicable)
Certain products or services may be available exclusively online through the website/application. These products or services may have limited quantities and are subject to return or exchange only according to our Return Policy.
We have made every effort to display as accurately as possible the colors and images of our products that appear at the store. We cannot guarantee that your computer monitor's display of any color will be accurate.
We reserve the right, but are not obligated, to limit the sales of our products or Services to any person, geographic region or jurisdiction. We may exercise this right on a case-by-case basis. We reserve the right to limit the quantities of any products or services that we offer. All descriptions of products or product pricing are subject to change at anytime without notice, at the sole discretion of us. We reserve the right to discontinue any product at any time. Any offer for any product or service made on this site is void where prohibited.
We do not warrant that the quality of any products, services, information, or other material purchased or obtained by you will meet your expectations, or that any errors in the Service will be corrected.

SECTION 6 - ACCURACY OF BILLING AND ACCOUNT INFORMATION
We reserve the right to refuse any order you place with us. We may, in our sole discretion, limit or cancel quantities purchased per person, per household or per order. These restrictions may include orders placed by or under the same customer account, the same credit card, and/or orders that use the same billing and/or shipping address. In the event that we make a change to or cancel an order, we may attempt to notify you by contacting the e-mail and/or billing address/phone number provided at the time the order was made. We reserve the right to limit or prohibit orders that, in our sole judgment, appear to be placed by dealers, resellers or distributors.

You agree to provide current, complete and accurate purchase and account information for all purchases made at our store. You agree to promptly update your account and other information, including your email address and credit card numbers and expiration dates, so that we can complete your transactions and contact you as needed.

For more details, please review our Return Policy.

SECTION 7 - OPTIONAL TOOLS
We may provide you with access to third-party tools over which we neither monitor nor have any control nor input.
You acknowledge and agree that we provide access to such tools ”as is” and “as available” without any warranties, representations or conditions of any kind and without any endorsement. We shall have no liability whatsoever arising from or relating to your use of optional third-party tools.
Any use by you of optional tools offered through the site is entirely at your own risk and discretion and you should ensure that you are familiar with and approve of the terms on which tools are provided by the relevant third-party provider(s).
We may also, in the future, offer new services and/or features through the website/application (including, the release of new tools and resources). Such new features and/or services shall also be subject to these TERMS AND CONDITIONS.

SECTION 8 - THIRD-PARTY LINKS
Certain content, products and services available via our Service may include materials from third-parties.
Third-party links on this site may direct you to third-party websites that are not affiliated with us. We are not responsible for examining or evaluating the content or accuracy and we do not warrant and will not have any liability or responsibility for any third-party materials or websites, or for any other materials, products, or services of third-parties.
We are not liable for any harm or damages related to the purchase or use of goods, services, resources, content, or any other transactions made in connection with any third-party websites. Please review carefully the third-party's policies and practices and make sure you understand them before you engage in any transaction. Complaints, claims, concerns, or questions regarding third-party products should be directed to the third-party.

SECTION 9 - USER COMMENTS, FEEDBACK AND OTHER SUBMISSIONS
If, at our request, you send certain specific submissions (for example contest entries) or without a request from us you send creative ideas, suggestions, proposals, plans, or other materials, whether online, by email, by postal mail, or otherwise (collectively, 'comments'), you agree that we may, at any time, without restriction, edit, copy, publish, distribute, translate and otherwise use in any medium any comments that you forward to us. We are and shall be under no obligation (1) to maintain any comments in confidence; (2) to pay compensation for any comments; or (3) to respond to any comments.
We may, but have no obligation to, monitor, edit or remove content that we determine in our sole discretion are unlawful, offensive, threatening, libelous, defamatory, pornographic, obscene or otherwise objectionable or violates any party’s intellectual property or these TERMS AND CONDITIONS.
You agree that your comments will not violate any right of any third-party, including copyright, trademark, privacy, personality or other personal or proprietary right. You further agree that your comments will not contain libelous or otherwise unlawful, abusive or obscene material, or contain any computer virus or other malware that could in any way affect the operation of the Service or any related website/application. You may not use a false e-mail address, pretend to be someone other than yourself, or otherwise mislead us or third-parties as to the origin of any comments. You are solely responsible for any comments you make and their accuracy. We take no responsibility and assume no liability for any comments posted by you or any third-party.

SECTION 10 - PERSONAL INFORMATION
Your submission of personal information through the store is governed by our Privacy Policy.

SECTION 11 - ERRORS, INACCURACIES AND OMISSIONS
Occasionally there may be information on our site or in the Service that contains typographical errors, inaccuracies or omissions that may relate to product descriptions, pricing, promotions, offers, product shipping charges, transit times and availability. We reserve the right to correct any errors, inaccuracies or omissions, and to change or update information or cancel orders if any information in the Service or on any related website/application is inaccurate at any time without prior notice (including after you have submitted your order).
We undertake no obligation to update, amend or clarify information in the Service or on any related website/application, including without limitation, pricing information, except as required by law. No specified update or refresh date applied in the Service or on any related website/application, should be taken to indicate that all information in the Service or on any related website/application has been modified or updated.

SECTION 12 - PROHIBITED USES
In addition to other prohibitions as set forth in the TERMS AND CONDITIONS, you are prohibited from using the site or its content: (a) for any unlawful purpose; (b) to solicit others to perform or participate in any unlawful acts; (c) to violate any international or UK’s regulations, rules, laws, or local ordinances; (d) to infringe upon or violate our intellectual property rights or the intellectual property rights of others; (e) to harass, abuse, insult, harm, defame, slander, disparage, intimidate, or discriminate based on gender, sexual orientation, religion, ethnicity, race, age, national origin, or disability; (f) to submit false or misleading information; (g) to upload or transmit viruses or any other type of malicious code that will or may be used in any way that will affect the functionality or operation of the Service or of any related website/application, other websites, or the Internet; (h) to collect or track the personal information of others; (i) to spam, phish, pharm, pretext, spider, crawl, or scrape; (j) for any obscene or immoral purpose; or (k) to interfere with or circumvent the security features of the Service or any related website/application, other websites, or the Internet. We reserve the right to terminate your use of the Service or any related website/application for violating any of the prohibited uses.

SECTION 13 - DISCLAIMER OF WARRANTIES; LIMITATION OF LIABILITY
We do not guarantee, represent or warrant that your use of our service will be uninterrupted, timely, secure or error-free.
We do not warrant that the results that may be obtained from the use of the service will be accurate or reliable.
You agree that from time to time we may remove the service for indefinite periods of time or cancel the service at any time, without notice to you.
You expressly agree that your use of, or inability to use, the service is at your sole risk. The service and all products and services delivered to you through the service are (except as expressly stated by us) provided 'as is' and 'as available' for your use, without any representation, warranties or conditions of any kind, either express or implied, including all implied warranties or conditions of merchantability, merchantable quality, fitness for a particular purpose, durability, title, and non-infringement.
In no case shall we, our directors, officers, employees, affiliates, agents, contractors, interns, suppliers, service providers or licensors be liable for any injury, loss, claim, or any direct, indirect, incidental, punitive, special, or consequential damages of any kind, including, without limitation lost profits, lost revenue, lost savings, loss of data, replacement costs, or any similar damages, whether based in contract, tort (including negligence), strict liability or otherwise, arising from your use of any of the service or any products procured using the service, or for any other claim related in any way to your use of the service or any product, including, but not limited to, any errors or omissions in any content, or any loss or damage of any kind incurred as a result of the use of the service or any content (or product) posted, transmitted, or otherwise made available via the service, even if advised of their possibility. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, our liability shall be limited to the maximum extent permitted by law.

SECTION 14 - INDEMNIFICATION
You agree to indemnify, defend and hold harmless us and our parent, subsidiaries, affiliates, partners, officers, directors, agents, contractors, licensors, service providers, subcontractors, suppliers, interns and employees, harmless from any claim or demand, including reasonable attorneys’ fees, made by any third-party due to or arising out of your breach of these TERMS AND CONDITIONS or the documents they incorporate by reference, or your violation of any law or the rights of a third-party.

SECTION 15 - SEVERABILITY
In the event that any provision of these TERMS AND CONDITIONS is determined to be unlawful, void or unenforceable, such provision shall nonetheless be enforceable to the fullest extent permitted by applicable law, and the unenforceable portion shall be deemed to be severed from these TERMS AND CONDITIONS, such determination shall not affect the validity and enforceability of any other remaining provisions.

SECTION 16 - TERMINATION
The obligations and liabilities of the parties incurred prior to the termination date shall survive the termination of this agreement for all purposes.
These TERMS AND CONDITIONS are effective unless and until terminated by either you or us. You may terminate these TERMS AND CONDITIONS at any time by notifying us that you no longer wish to use our Services, or when you cease using our site.
If in our sole judgment you fail, or we suspect that you have failed, to comply with any term or provision of these TERMS AND CONDITIONS, we also may terminate this agreement at any time without notice and you will remain liable for all amounts due up to and including the date of termination; and/or accordingly may deny you access to our Services (or any part thereof).

SECTION 17 - ENTIRE AGREEMENT
The failure of us to exercise or enforce any right or provision of these TERMS AND CONDITIONS shall not constitute a waiver of such right or provision.
These TERMS AND CONDITIONS and any policies or operating rules posted by us on this site or in respect to The Service constitutes the entire agreement and understanding between you and us and govern your use of the Service, superseding any prior or contemporaneous agreements, communications and proposals, whether oral or written, between you and us (including, but not limited to, any prior versions of the TERMS AND CONDITIONS).
Any ambiguities in the interpretation of these TERMS AND CONDITIONS shall not be construed against the drafting party.

SECTION 18 - GOVERNING LAW
These TERMS AND CONDITIONS and any separate agreements whereby we provide you Services shall be governed by and construed in accordance with the laws of Ireland.

SECTION 19 - CHANGES TO TERMS AND CONDITIONS
You can review the most current version of the TERMS AND CONDITIONS at any time at this page.
We reserve the right, at our sole discretion, to update, change or replace any part of these TERMS AND CONDITIONS by posting updates and changes to our website/application. It is your responsibility to check our website/application periodically for changes. Your continued use of or access to our website/application or the Service following the posting of any changes to these TERMS AND CONDITIONS constitutes acceptance of those changes.

SECTION 20 - CONTACT INFORMATION
Feel free to contact us at info@harfington.com for any query.

Carbon Brushes 0.63x0.51x3.78 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack

Specification

Product Variants

Description

Description

You May Also Like

Recently viewed