Home Pipe, Tubing, Hose & FittingsPipe FittingsConnectors90° Elbow
Harfington 2Pcs Push to Connect Tube Fitting 3/8" x 3/8" Elbow Fitting with Plug-In Stem

2Pcs Push to Connect Tube Fitting 3/8" x 3/8" Elbow Fitting with Plug-In Stem

ID:
$8.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 25%OFF
    Order $5000+
  • 20%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • [SIZE&PACKAGE]: Operating Pressure: 0-1.2 MPa; Operating Temperature: 0-70 Degree Celsius; Fit Tube OD: 3/8"; Plug-in Stem OD: 3/8"; Push to Connect Tube Fitting Size: 55x 35.5 x 18mm/2.2" x 1.38" x 0.71"(L*W*H); Package: 2Pcs x Elbow Fitting with Plug-In Stem
  • [MATERIAL]: Push to connect plug fittings are made of plastic, and have the characteristics of flexibility, wear resistance, light weight, crack resistance, compression and corrosion resistance, good sealing performance, and long service life
  • [DESIGN]: Plug-In elbow has a push-in fitting on one end and a plug-in stem on the other end. The fitting cap can rotate freely 360 degrees, and the angle can be adjusted during installation
  • [INSTALLATION]: The push to connect fitting with plug-in stem is easy to install. First, cut the pipe flat, then put the pipe into the end of the fitting to prevent leakage. After inserting the pipe, try to pull the pipe. If the pipe cannot be pulled, it means it is connected. When loosening the pipe, make sure there is no pressure in the pipe, and then press the end cap evenly to the bottom
  • [WIDE APPLICATION]: Push to connect tube fitting can be used to connect polyethylene, nylon, and PU pipes. Commonly used in low-pressure hydraulic and pneumatic systems, such as aircraft control, air horns, automotive assembly, and maintenance, etc
  • In stock, ready to ship
Cart
Cart
About this item
  • [SIZE&PACKAGE]: Operating Pressure: 0-1.2 MPa; Operating Temperature: 0-70 Degree Celsius; Fit Tube OD: 3/8"; Plug-in Stem OD: 3/8"; Push to Connect Tube Fitting Size: 55x 35.5 x 18mm/2.2" x 1.38" x 0.71"(L*W*H); Package: 2Pcs x Elbow Fitting with Plug-In Stem
  • [MATERIAL]: Push to connect plug fittings are made of plastic, and have the characteristics of flexibility, wear resistance, light weight, crack resistance, compression and corrosion resistance, good sealing performance, and long service life
  • [DESIGN]: Plug-In elbow has a push-in fitting on one end and a plug-in stem on the other end. The fitting cap can rotate freely 360 degrees, and the angle can be adjusted during installation
  • [INSTALLATION]: The push to connect fitting with plug-in stem is easy to install. First, cut the pipe flat, then put the pipe into the end of the fitting to prevent leakage. After inserting the pipe, try to pull the pipe. If the pipe cannot be pulled, it means it is connected. When loosening the pipe, make sure there is no pressure in the pipe, and then press the end cap evenly to the bottom
  • [WIDE APPLICATION]: Push to connect tube fitting can be used to connect polyethylene, nylon, and PU pipes. Commonly used in low-pressure hydraulic and pneumatic systems, such as aircraft control, air horns, automotive assembly, and maintenance, etc
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Description:
  • Material - Push to connect plug fittings are made of plastic, and have the characteristics of flexibility, wear resistance, light weight, crack resistance, compression and corrosion resistance, good sealing performance, and long service life.
  • Design - Plug-In elbow has a push-in fitting on one end and a plug-in stem on the other end. The fitting cap can rotate freely 360 degrees, and the angle can be adjusted during installation.
  • Installation - The push to connect fitting with plug-in stem is easy to install. First, cut the pipe flat, then put the pipe into the end of the fitting to prevent leakage. After inserting the pipe, try to pull the pipe. If the pipe cannot be pulled, it means it is connected. When loosening the pipe, make sure there is no pressure in the pipe, and then press the end cap evenly to the bottom. 
  • Wide Application - Push to connect tube fitting can be used to connect polyethylene, nylon, and PU pipes. Commonly used in low-pressure hydraulic and pneumatic systems, such as aircraft control, air horns, automotive assembly, and maintenance, etc.
Specification:
  • Material: Plastic
  • Color: Black
  • Operating Pressure: 0-1.2 MPa
  • Operating Temperature: 0-70 Degree Celsius
  • Fit Tube OD: 3/8"
  • Plug-in Stem OD: 3/8"
  • Push to Connect Tube Fitting Size: 55x 35.5 x 18mm/2.2" x 1.38" x 0.71"(L*W*H)
  • Package: 2Pcs x Elbow Fitting with Plug-In Stem

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$8.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 25%OFF
    Order $5000+
  • 20%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Description:
  • Material - Push to connect plug fittings are made of plastic, and have the characteristics of flexibility, wear resistance, light weight, crack resistance, compression and corrosion resistance, good sealing performance, and long service life.
  • Design - Plug-In elbow has a push-in fitting on one end and a plug-in stem on the other end. The fitting cap can rotate freely 360 degrees, and the angle can be adjusted during installation.
  • Installation - The push to connect fitting with plug-in stem is easy to install. First, cut the pipe flat, then put the pipe into the end of the fitting to prevent leakage. After inserting the pipe, try to pull the pipe. If the pipe cannot be pulled, it means it is connected. When loosening the pipe, make sure there is no pressure in the pipe, and then press the end cap evenly to the bottom. 
  • Wide Application - Push to connect tube fitting can be used to connect polyethylene, nylon, and PU pipes. Commonly used in low-pressure hydraulic and pneumatic systems, such as aircraft control, air horns, automotive assembly, and maintenance, etc.
Specification:
  • Material: Plastic
  • Color: Black
  • Operating Pressure: 0-1.2 MPa
  • Operating Temperature: 0-70 Degree Celsius
  • Fit Tube OD: 3/8"
  • Plug-in Stem OD: 3/8"
  • Push to Connect Tube Fitting Size: 55x 35.5 x 18mm/2.2" x 1.38" x 0.71"(L*W*H)
  • Package: 2Pcs x Elbow Fitting with Plug-In Stem

{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)