Home Electrical & LightingLightingLED LightsPre-wired LED Lights
Harfington 10 Pcs 5mm Pre Wired LED Light Emitting Diodes 9-12V Slow Flashing Colorful

10 Pcs 5mm Pre Wired LED Light Emitting Diodes 9-12V Slow Flashing Colorful

ID:
$6.33 Regular price
/
Wholesale Price
35%OFF
Order $5000+
  • 35%OFF
    Order $5000+
  • 25%OFF
    Order $2000+
  • 15%OFF
    Order $800+
  • 10%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • This is a set of pre-wired,slow blinking LEDs changing rhythm, with gentle and smooth color s.suitable for use as indicator lights or decorative lights in electronic projects. It comes with pre-soldered wires for easy soldering, and the clear bulb emits a bright, flashing light, making it good for DIY electronics, circuit board signaling, equipment status indication, small decorative lighting, and electronic experimental setups.
  • Pre-wired LED beads are energy-efficient, providing excellent brightness while reducing power consumption, thus helping to lower energy costs and extend the life of battery-powered devices. The pre-wired design eliminates the need for additional soldering, saving electronic assembly time. Clear red/black wire polarity markings prevent incorrect connections. Multiple flashing colors allow for various signal indications, making them more visible and practical in different scenarios.
  • Determine the polarity: Connect the red wire (anode) to the positive terminal (9-12V) of the power supply and the black wire (cathode) to the negative terminal (-).
  • Always observe correct polarity and use current-limiting resistor; not suitable for wet environments.
  • Colloid color: Clear Luminous Color: Colorful Lamp diameter: 5mm/0.2inch Lamp height: 8.7mm/0.34inch Lead length: 20±2cm/0.8±0.01inch Forward voltage: 9-12V Max current: 20mA Welding resistance: 560Ω Round top, 2 lead wires, Polarity: anode (red lead)/cathode (black lead). Packing List: 10 Pcs x Pre-Wired LED Lights
  • In stock, ready to ship
Cart
Cart
About this item
  • This is a set of pre-wired,slow blinking LEDs changing rhythm, with gentle and smooth color s.suitable for use as indicator lights or decorative lights in electronic projects. It comes with pre-soldered wires for easy soldering, and the clear bulb emits a bright, flashing light, making it good for DIY electronics, circuit board signaling, equipment status indication, small decorative lighting, and electronic experimental setups.
  • Pre-wired LED beads are energy-efficient, providing excellent brightness while reducing power consumption, thus helping to lower energy costs and extend the life of battery-powered devices. The pre-wired design eliminates the need for additional soldering, saving electronic assembly time. Clear red/black wire polarity markings prevent incorrect connections. Multiple flashing colors allow for various signal indications, making them more visible and practical in different scenarios.
  • Determine the polarity: Connect the red wire (anode) to the positive terminal (9-12V) of the power supply and the black wire (cathode) to the negative terminal (-).
  • Always observe correct polarity and use current-limiting resistor; not suitable for wet environments.
  • Colloid color: Clear Luminous Color: Colorful Lamp diameter: 5mm/0.2inch Lamp height: 8.7mm/0.34inch Lead length: 20±2cm/0.8±0.01inch Forward voltage: 9-12V Max current: 20mA Welding resistance: 560Ω Round top, 2 lead wires, Polarity: anode (red lead)/cathode (black lead). Packing List: 10 Pcs x Pre-Wired LED Lights
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
What is this?
This is a set of pre-wired, slow-blinking LEDs changing rhythm, with gentle and smooth color s.suitable for use as indicator lights or decorative lights in electronic projects. It comes with pre-soldered wires for easy soldering, and the clear bulb emits a bright, flashing light, making it good for DIY electronics, circuit board signaling, equipment status indication, small decorative lighting, and electronic experimental setups.

What will I get?
Colloid color: Clear
Luminous Color: Colorful
Lamp diameter: 5mm/0.2inch
Lamp height: 8.7mm/0.34inch
Lead length: 20±2cm/0.8±0.01inch
Forward voltage: 9-12V
Max current: 20mA
Welding resistance: 560 ;
Round top, 2 lead wires, Polarity: anode (red lead)/cathode (black lead).
Packing List: 10 Pcs x Pre-Wired LED Lights

Are there any advantages of the product?
Pre-wired LED beads are energy-efficient, providing excellent brightness while reducing power consumption, thus helping to lower energy costs and extend the life of battery-powered devices. The pre-wired design eliminates the need for additional soldering, saving electronic assembly time. Clear red/black wire polarity markings prevent incorrect connections. Multiple flashing colors allow for various signal indications, making them more visible and practical in different scenarios.

How to use it?
Determine the polarity: Connect the red wire (anode) to the positive terminal (9-12V) of the power supply and the black wire (cathode) to the negative terminal (-).

What should  I notice?
Always observe correct polarity and use current-limiting resistor; not suitable for wet environments.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$6.33 Regular price
/
Wholesale Price
35%OFF
Order $5000+
  • 35%OFF
    Order $5000+
  • 25%OFF
    Order $2000+
  • 15%OFF
    Order $800+
  • 10%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

What is this?
This is a set of pre-wired, slow-blinking LEDs changing rhythm, with gentle and smooth color s.suitable for use as indicator lights or decorative lights in electronic projects. It comes with pre-soldered wires for easy soldering, and the clear bulb emits a bright, flashing light, making it good for DIY electronics, circuit board signaling, equipment status indication, small decorative lighting, and electronic experimental setups.

What will I get?
Colloid color: Clear
Luminous Color: Colorful
Lamp diameter: 5mm/0.2inch
Lamp height: 8.7mm/0.34inch
Lead length: 20±2cm/0.8±0.01inch
Forward voltage: 9-12V
Max current: 20mA
Welding resistance: 560 ;
Round top, 2 lead wires, Polarity: anode (red lead)/cathode (black lead).
Packing List: 10 Pcs x Pre-Wired LED Lights

Are there any advantages of the product?
Pre-wired LED beads are energy-efficient, providing excellent brightness while reducing power consumption, thus helping to lower energy costs and extend the life of battery-powered devices. The pre-wired design eliminates the need for additional soldering, saving electronic assembly time. Clear red/black wire polarity markings prevent incorrect connections. Multiple flashing colors allow for various signal indications, making them more visible and practical in different scenarios.

How to use it?
Determine the polarity: Connect the red wire (anode) to the positive terminal (9-12V) of the power supply and the black wire (cathode) to the negative terminal (-).

What should  I notice?
Always observe correct polarity and use current-limiting resistor; not suitable for wet environments.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)