Home Automobiles & MotorcyclesReplacement PartsTurbocharger Intercooler PartsHose End Cap & Hose Clamps
Make sure this fits
This fits.
{[vehicleTitle]}
This does not fit.
{[vehicleTitle]}
{[vehicleTitle]}
Harfington Car ID 3/4" 19mm 180 Degree U Bend Shape Silicone Rubber Elbow Coupler Hose

Car ID 3/4" 19mm 180 Degree U Bend Shape Silicone Rubber Elbow Coupler Hose

ID:
$13.52 Regular price
/
About this item
  • U Shape Coolant Silicone Rubber Hose: Large Inner Diameter: 19mm/0.75in, Small Inner Diameter: 19mm/0.75in, Degree: 180, Length: 120mm/4.72in, Thicknesses: 5mm/0.2in.
  • Silicone Rubber Hose Tube: 4-ply construction with embedded polyester reinforcement mesh. This design dramatically increases burst strength, prevents expansion under boost pressure, and reduce the common "ballooning" effect of hoses.
  • Wide application range: Silicone transition coupling hoses are widely used in various high-performance and industrial applications such as the automotive racing industry, turbo diesel pickup trucks, heavy-duty equipment and machinery, custom cooling systems, DIY turbo intercooler piping fabrication, commercial trucking, buses and coaches, marine vessels vehicles, aerospace systems, generators, agricultural tractors, and general construction equipment.
  • Easy Installation: 1. Drain coolant and remove old hose carefully. 2. Clean all connection surfaces thoroughly. 3.Lubricate fittings lightly for easy sliding. 4.Position new hose, avoid twists or sharp contacts. 5.Secure with quality clamps; refill coolant and test.
  • Packaged inclued:1 PC 19mm ID 180 Dgree Silicone Hose
  • In stock, ready to ship
Cart
Cart
About this item
  • U Shape Coolant Silicone Rubber Hose: Large Inner Diameter: 19mm/0.75in, Small Inner Diameter: 19mm/0.75in, Degree: 180, Length: 120mm/4.72in, Thicknesses: 5mm/0.2in.
  • Silicone Rubber Hose Tube: 4-ply construction with embedded polyester reinforcement mesh. This design dramatically increases burst strength, prevents expansion under boost pressure, and reduce the common "ballooning" effect of hoses.
  • Wide application range: Silicone transition coupling hoses are widely used in various high-performance and industrial applications such as the automotive racing industry, turbo diesel pickup trucks, heavy-duty equipment and machinery, custom cooling systems, DIY turbo intercooler piping fabrication, commercial trucking, buses and coaches, marine vessels vehicles, aerospace systems, generators, agricultural tractors, and general construction equipment.
  • Easy Installation: 1. Drain coolant and remove old hose carefully. 2. Clean all connection surfaces thoroughly. 3.Lubricate fittings lightly for easy sliding. 4.Position new hose, avoid twists or sharp contacts. 5.Secure with quality clamps; refill coolant and test.
  • Packaged inclued:1 PC 19mm ID 180 Dgree Silicone Hose
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Features:
  • Multi-Layer Woven Cloth Process - enhance the toughness of silicone hose, prolong the service life.
  • 4-ply construction with embedded polyester reinforcement mesh.
  • This design dramatically increases burst strength, prevents expansion under boost pressure, and reduce the common "ballooning" effect of hoses.
Wide application range:
  • Silicone transition coupling hoses are widely used in various high-performance and industrial applications such as the automotive racing industry, turbo diesel pickup trucks, heavy-duty equipment and machinery, custom cooling systems, DIY turbo intercooler piping fabrication, commercial trucking, buses and coaches, marine vessels vehicles, aerospace systems, generators, agricultural tractors, and general construction equipment.
Material
  • Silicone Material-withstand the high temperatures of engine coolant, as well as the corrosive properties of the coolant itself.
Specification:
  • Large Inner Diameter: 19mm/0.75in
  • Small Inner Diameter: 19mm/0.75in
  • Degree: 180
  • Length: 120mm/4.72in
  • Thicknesses: 5mm/0.2in
Applications:
  • Applies to Coolant, Brake Fluid, Antifreeze Fluid, Hot/Cold Wind, etc.
  • Note: Reinforced Silicone Hose Are Not Compatible with fuel, oil, or any petroleum-based products.
Easy Installation:
  • 1. Drain coolant and remove old hose carefully.
  • 2. Clean all connection surfaces thoroughly.
  • 3.Lubricate fittings lightly for easy sliding.
  • 4.Position new hose, avoid twists or sharp contacts.
  • 5.Secure with quality clamps; refill coolant and test.
Package included:
  • 1 PC 19mm ID 180 Dgree Silicone Hose
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$13.52 Regular price
/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Features:
  • Multi-Layer Woven Cloth Process - enhance the toughness of silicone hose, prolong the service life.
  • 4-ply construction with embedded polyester reinforcement mesh.
  • This design dramatically increases burst strength, prevents expansion under boost pressure, and reduce the common "ballooning" effect of hoses.
Wide application range:
  • Silicone transition coupling hoses are widely used in various high-performance and industrial applications such as the automotive racing industry, turbo diesel pickup trucks, heavy-duty equipment and machinery, custom cooling systems, DIY turbo intercooler piping fabrication, commercial trucking, buses and coaches, marine vessels vehicles, aerospace systems, generators, agricultural tractors, and general construction equipment.
Material
  • Silicone Material-withstand the high temperatures of engine coolant, as well as the corrosive properties of the coolant itself.
Specification:
  • Large Inner Diameter: 19mm/0.75in
  • Small Inner Diameter: 19mm/0.75in
  • Degree: 180
  • Length: 120mm/4.72in
  • Thicknesses: 5mm/0.2in
Applications:
  • Applies to Coolant, Brake Fluid, Antifreeze Fluid, Hot/Cold Wind, etc.
  • Note: Reinforced Silicone Hose Are Not Compatible with fuel, oil, or any petroleum-based products.
Easy Installation:
  • 1. Drain coolant and remove old hose carefully.
  • 2. Clean all connection surfaces thoroughly.
  • 3.Lubricate fittings lightly for easy sliding.
  • 4.Position new hose, avoid twists or sharp contacts.
  • 5.Secure with quality clamps; refill coolant and test.
Package included:
  • 1 PC 19mm ID 180 Dgree Silicone Hose
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)