Home Pipe, Tubing, Hose & FittingsPipe FittingsConnectorsBrass Quick Connect Disconnect Sets
Harfington Brass Flared Plug, SAE Seal Tube Fitting Hex Pipe Fittings for Refrigeration

Brass Flared Plug, SAE Seal Tube Fitting Hex Pipe Fittings for Refrigeration

ID:
$8.40 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
2
NumberOfItems
1/2" Tube OD
SizeName
About this item
  • If you have a damaged or worn-out plug in your HVAC system, these reliable brass seal plugs are a great replacement part. This flare brass plug is suitable for terminating/closing pipe end, gas pipelines, instrumentation, hydraulic, and refrigeration systems. It can be used with brass, copper, aluminum, and stainless steel tubes which can be flared.
  • Specification: Material: Brass; Thread Size: Male 1/2 SAE / 3/4"-16UNF; Size: 26.92 x 19mm/ 1.1 x 0.7inch (L x Hex Width); Packing List: 2 Pack x Brass Pipe Fitting
  • Advantage: Made from quality brass, this fitting is durable and can withstand the harsh conditions of HVAC systems. The plug provides a secure seal, preventing leaks and ensuring efficient operation. It is suitable for various air conditioner and refrigeration systems and is precisely machined to ensure a great fit. With this fitting, you can quickly and easily replace damaged or worn-out parts, restoring your HVAC system to its optimal performance.
  • Instruction: Remove the old plug by loosening it with a wrench. Clean the surface around the fitting to remove any debris or dirt. Insert the new plug into the opening and tighten it with wrench.
  • NOTE: Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
  • In stock, ready to ship
Cart
Cart
About this item
  • If you have a damaged or worn-out plug in your HVAC system, these reliable brass seal plugs are a great replacement part. This flare brass plug is suitable for terminating/closing pipe end, gas pipelines, instrumentation, hydraulic, and refrigeration systems. It can be used with brass, copper, aluminum, and stainless steel tubes which can be flared.
  • Specification: Material: Brass; Thread Size: Male 1/2 SAE / 3/4"-16UNF; Size: 26.92 x 19mm/ 1.1 x 0.7inch (L x Hex Width); Packing List: 2 Pack x Brass Pipe Fitting
  • Advantage: Made from quality brass, this fitting is durable and can withstand the harsh conditions of HVAC systems. The plug provides a secure seal, preventing leaks and ensuring efficient operation. It is suitable for various air conditioner and refrigeration systems and is precisely machined to ensure a great fit. With this fitting, you can quickly and easily replace damaged or worn-out parts, restoring your HVAC system to its optimal performance.
  • Instruction: Remove the old plug by loosening it with a wrench. Clean the surface around the fitting to remove any debris or dirt. Insert the new plug into the opening and tighten it with wrench.
  • NOTE: Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
If you have a damaged or worn-out plug in your HVAC system, these reliable brass seal plugs are a great replacement part. This flare brass plug is suitable for terminating/closing pipe end, gas pipelines, instrumentation, hydraulic, and refrigeration systems. It can be used with brass, copper, aluminum, and stainless steel tubes which can be flared.

Specification
Color: Brass Tone
Material: Brass
Thread Size: Male 1/2 SAE / 3/4"-16UNF
Size: 26.92 x 19mm/ 1.1 x 0.7inch (L x Hex Width)
Packing List: 2 Pack x Brass Pipe Fitting

Advantage
Made from quality brass, this fitting is durable and can withstand the harsh conditions of HVAC systems. The plug provides a secure seal, preventing leaks and ensuring efficient operation. It is suitable for various air conditioner and refrigeration systems and is precisely machined to ensure a great fit. With this fitting, you can quickly and easily replace damaged or worn-out parts, restoring your HVAC system to its optimal performance.

Instruction
Remove the old plug by loosening it with a wrench. Clean the surface around the fitting to remove any debris or dirt. Insert the new plug into the opening and tighten it with wrench.

NOTE: Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$8.40 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

If you have a damaged or worn-out plug in your HVAC system, these reliable brass seal plugs are a great replacement part. This flare brass plug is suitable for terminating/closing pipe end, gas pipelines, instrumentation, hydraulic, and refrigeration systems. It can be used with brass, copper, aluminum, and stainless steel tubes which can be flared.

Specification
Color: Brass Tone
Material: Brass
Thread Size: Male 1/2 SAE / 3/4"-16UNF
Size: 26.92 x 19mm/ 1.1 x 0.7inch (L x Hex Width)
Packing List: 2 Pack x Brass Pipe Fitting

Advantage
Made from quality brass, this fitting is durable and can withstand the harsh conditions of HVAC systems. The plug provides a secure seal, preventing leaks and ensuring efficient operation. It is suitable for various air conditioner and refrigeration systems and is precisely machined to ensure a great fit. With this fitting, you can quickly and easily replace damaged or worn-out parts, restoring your HVAC system to its optimal performance.

Instruction
Remove the old plug by loosening it with a wrench. Clean the surface around the fitting to remove any debris or dirt. Insert the new plug into the opening and tighten it with wrench.

NOTE: Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)