Home Hand ToolsScrewdriver BitsScrewdriver Bits_a
Harfington 5pcs 1/4" Socket Adapter Cr-V Impact Drill Bit Adapter with 1/4" Hex Shank

5pcs 1/4" Socket Adapter Cr-V Impact Drill Bit Adapter with 1/4" Hex Shank

ID:
$6.46 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • Size - Square Tip Size: 1/4"; Hex Shank Size (Approx.): 1/4"; Length: 1" / 25mm.
  • Material - Impact grade socket adapter is made of heat-treated chrome vanadium steel (HRC52-56 hardness) with high torque resistance and durability. Sandblasted surface resists corrosion.
  • Feature - This socket adapter has a very special design part of spring-loaded ball bearing on each square head, in order to effectively fix the socket and avoid sliding. In addition, the tip of the adapter is also treated, which can absorb some small tools such as screws and nuts during use to improve your efficiency.
  • Application - 1-inch length is designed to fit into tight spaces while maintaining strength. Great for automotive, DIY and mechanical work. Extend it to narrow, hard-to-reach places so you can easily turn screws, nuts, etc. Great for automotive mechanical vehicle repair, DIY, home maintenance and most general repairs.
  • Note - Make sure the tip fully engages the socket before use to prevent slipping. Clean and store in a dry place after use to prevent rust.
  • In stock, ready to ship
Cart
Cart
About this item
  • Size - Square Tip Size: 1/4"; Hex Shank Size (Approx.): 1/4"; Length: 1" / 25mm.
  • Material - Impact grade socket adapter is made of heat-treated chrome vanadium steel (HRC52-56 hardness) with high torque resistance and durability. Sandblasted surface resists corrosion.
  • Feature - This socket adapter has a very special design part of spring-loaded ball bearing on each square head, in order to effectively fix the socket and avoid sliding. In addition, the tip of the adapter is also treated, which can absorb some small tools such as screws and nuts during use to improve your efficiency.
  • Application - 1-inch length is designed to fit into tight spaces while maintaining strength. Great for automotive, DIY and mechanical work. Extend it to narrow, hard-to-reach places so you can easily turn screws, nuts, etc. Great for automotive mechanical vehicle repair, DIY, home maintenance and most general repairs.
  • Note - Make sure the tip fully engages the socket before use to prevent slipping. Clean and store in a dry place after use to prevent rust.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
  • This 1/4" Hex to 1/4" Square Socket Adapter bridges the gap between hex-shank power tools and square-drive sockets. Crafted from heat-treated CR-V steel (HRC52-56), it withstands high torque and repetitive use without deformation. The sandblasted finish enhances grip and corrosion resistance.
  • Material: Chrome-vanadium steel (CR-V) with sandblasted surface. Hardness: HRC52-56 for impact-grade durability. Design: 1-inch length for compact access; tip for stability. Compatibility: Converts 1/4" hex shank (drills/drivers) to 1/4" square drive (sockets).
  • Automotive: Suitable for lug nuts, engine work, and repairs. DIY & Construction: Drive sockets with power drills or impact wrenches. Home Maintenance: Tighten or loosen bolts in furniture, appliances, and machinery.
  • Make sure the tip fully engages the socket before use to prevent slipping. Clean and store in a dry place after use to prevent rust.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$6.46 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

  • This 1/4" Hex to 1/4" Square Socket Adapter bridges the gap between hex-shank power tools and square-drive sockets. Crafted from heat-treated CR-V steel (HRC52-56), it withstands high torque and repetitive use without deformation. The sandblasted finish enhances grip and corrosion resistance.
  • Material: Chrome-vanadium steel (CR-V) with sandblasted surface. Hardness: HRC52-56 for impact-grade durability. Design: 1-inch length for compact access; tip for stability. Compatibility: Converts 1/4" hex shank (drills/drivers) to 1/4" square drive (sockets).
  • Automotive: Suitable for lug nuts, engine work, and repairs. DIY & Construction: Drive sockets with power drills or impact wrenches. Home Maintenance: Tighten or loosen bolts in furniture, appliances, and machinery.
  • Make sure the tip fully engages the socket before use to prevent slipping. Clean and store in a dry place after use to prevent rust.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)