Skip to content
Product Variants
| Products | {[ attr.label ]} | title | ID | Price | Qty |
|---|
| Products | {[ attr.label ]} | title | ID | Price | Qty | |
|---|---|---|---|---|---|---|
|
|
{[ attributeMap[attr.label+item.sku_id] ]} | {[item.title]} | {[item.id]} | {['$' + item.price]} |
|
Description
Description
- Made of butyl material for heat resistance. This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.
- Self-adhesive sound dampening material, it is easy to install.
- It is desined in handy size which make it easier in terms of cutting.
- Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption.
- Color: Silver Tone
- Material: Butyl Rubber, Aluminum
- Total Coverage Area: 26.5 sqft
- Thickness: 2mm / 0.08 inch / 80 mil
- Size: 400x250mm / 15.75"x9.84"(L*W)
- Decide what part you want to insulate first: car roof, car floor, car doors or a hood.
- Remove the remains of the factory insulation once you have dismantled the interior. Properly clean and degrease the surface prior to installation of mat.
- Measure the pre-cleaned surface of the prospective spot that you are going to treat.
- Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. When your sheet is ready to used, lay that down to the surface and let is glue. Flatten the sheet with hands to avoid air bubbles. Use a roller for rolling down the foil as a neat step.
- Please clean the surface you want to paste.
- You could heat it to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius first with lamp heating it until soft.
- It would be best to wear the gloves when working.
- 25 x Heat Sound Deadener Insulation Mat
- 1 x Manual
- Made of butyl material for heat resistance. This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.
- Self-adhesive sound dampening material, it is easy to install.
- It is desined in handy size which make it easier in terms of cutting.
- Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption.
- Color: Silver Tone
- Material: Butyl Rubber, Aluminum
- Total Coverage Area: 26.5 sqft
- Thickness: 2mm / 0.08 inch / 80 mil
- Size: 400x250mm / 15.75"x9.84"(L*W)
- Decide what part you want to insulate first: car roof, car floor, car doors or a hood.
- Remove the remains of the factory insulation once you have dismantled the interior. Properly clean and degrease the surface prior to installation of mat.
- Measure the pre-cleaned surface of the prospective spot that you are going to treat.
- Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. When your sheet is ready to used, lay that down to the surface and let is glue. Flatten the sheet with hands to avoid air bubbles. Use a roller for rolling down the foil as a neat step.
- Please clean the surface you want to paste.
- You could heat it to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius first with lamp heating it until soft.
- It would be best to wear the gloves when working.
- 25 x Heat Sound Deadener Insulation Mat
- 1 x Manual
Free upgraded to UPS over $200
Thank you for choosing Harfington!
We make things easy for you, you will enjoy a 30-day unconditional return after receiving your items!
If you are not completely satisfied with your product for any reason, we will gladly sort out a solution for you. Once you want to return or refund the order, please Contact Us and our agents will contact you in 1-2 business days.
The return process
1. Contact us
Contact our Customer Service via email or website,Prepare the proof of purchase and the reason of return)
2. Return & Refund
If you decide to return an item that is not defective, you’re eligible for a 30-day unconditional return since you’ve received it. Our Customer Service team will send you an address for receiving your return items, it takes 3-5 business days to process your return and issue the refund after our warehouse received the items.
Matters needing attention
All returned items should include the following:
• Original packaging (including original box, plastics foam, bubble wrap, bags, etc.)
• Original intact UPC barcode. Removal of the UPC code voids any possibility of the return request being honored.
• All accessories, including cords, cases, transformers, parts, batteries, assembly tools, etc.
• All manufacturer instruction manuals, warranty cards, and other documents.
*Return Policy Exceptions
1.Original shipping fee and handling fees are non-refundable.
2.Return shipping fee is not responsible by the Harfington, you can use your shipping method and at your own cost.
3.If our warehouse detect worn, damaged, or missing on the return items, Harfington reserve the rights to cancel the refund.
4.Defective Items or Wrong Items.If you receive an item that is wrong, defective, or broken, within 30 days of the date since you’ve received it, Harfington will exchange a new item to you or 100% refund it
5.Non-returnable Items. Some of our products are not under the service of 30-day unconditional returns. We will tag these products on the detail page and your orders.
6.Larger Items.Some items require special shipping and handling. Some larger items may require a freight carrier or may exceed the weight limits allowed, if you want to return a larger item, please contact our Customer Service.
If you have any issues with your return or refund, please contact the Customer Service team, we are happy to help!
Email: info@harfington.com
