Home FabricatingMachiningDrill BitsTwist Drill BitsStraight Shank Drill Bits
Harfington AlTiSin Coated Carbide Drill Bit Straight Shank for Hard Steel

AlTiSin Coated Carbide Drill Bit Straight Shank for Hard Steel

ID:
$8.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
1.6mm
Size
About this item
  • ★ Carbide Drill Bit Size --- Drilling diameter: 1.6mm / 0.063"; tool flute length: 19mm / 0.75"; shank diameter: 1.6mm / 0.063"; overall length: 38mm / 1.5"; maximum work hardness: HRC65; tool flute type: spiral; shank type: straight, round
  • ★ Wide Applications --- The solid carbide drill bit is suitable for drilling high-hardness and difficult-to-machine materials below HRC65, such as alloy steel, stainless steel, tool steel, hardened steel. It is also widely used on aluminum, copper, hard plastic and wood.
  • ★ Sharp Spiral Flutes --- The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Provide fast, neat and smooth cuts. Nanometer AlTiSin composite coatings greatly increase the hardness, wear resistance and thermal stability.
  • ★ K45/P10 Tungsten Carbide --- It is a micro grain tungsten-cobalt alloy with higher hardness, better wear resistance, higher strength, better bending resistance and heat resistance. Provides faster cutting speeds and is harder but more brittle.
  • ★ Useful Tips --- Use on machining centers, CNC lathes, drill presses and bench drills. Keep cool and gentle when using. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
  • In stock, ready to ship
Cart
Cart
About this item
  • ★ Carbide Drill Bit Size --- Drilling diameter: 1.6mm / 0.063"; tool flute length: 19mm / 0.75"; shank diameter: 1.6mm / 0.063"; overall length: 38mm / 1.5"; maximum work hardness: HRC65; tool flute type: spiral; shank type: straight, round
  • ★ Wide Applications --- The solid carbide drill bit is suitable for drilling high-hardness and difficult-to-machine materials below HRC65, such as alloy steel, stainless steel, tool steel, hardened steel. It is also widely used on aluminum, copper, hard plastic and wood.
  • ★ Sharp Spiral Flutes --- The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Provide fast, neat and smooth cuts. Nanometer AlTiSin composite coatings greatly increase the hardness, wear resistance and thermal stability.
  • ★ K45/P10 Tungsten Carbide --- It is a micro grain tungsten-cobalt alloy with higher hardness, better wear resistance, higher strength, better bending resistance and heat resistance. Provides faster cutting speeds and is harder but more brittle.
  • ★ Useful Tips --- Use on machining centers, CNC lathes, drill presses and bench drills. Keep cool and gentle when using. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Attributes:
* Drilling Diameter: 1.6mm / 0.063"
* Tool Flute Length: 19mm / 0.75"
* Shank Diameter: 1.6mm / 0.063"
* Overall Length: 38mm / 1.5"
* Material: K45 / P10 Tungsten Carbide
* Finish: Nanometer AlTiSin Coated
* Maximum Work Hardness: HRC65
* Tool Flute Type: Spiral
* Shank Type: Straight, Round

What Is Included:
* 1 Piece x Carbide Drill Bit

Applications & Features:
---The solid carbide drill bit is suitable for drilling high-hardness and difficult-to-machine materials below HRC65, such as alloy steel, stainless steel, tool steel, hardened steel. It is also widely used on aluminum, copper, hard plastic and wood. Use on machining centers, CNC lathes, drill presses and bench drills. The appropriate lubricant can facilitate cutting or cooling, improve dimensional accuracy and extending tool life.
--- K45/P10 tungsten carbide is a micro grain tungsten-cobalt alloy with higher hardness, better wear resistance, higher strength, better bending resistance and heat resistance. Provides faster cutting speeds than other substrates and is harder but more brittle. Carbide material with good drilling properties ensures high working efficiency. Nanometer AlTiSin composite coatings greatly increase the hardness, wear resistance and thermal stability. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips.

Useful Tips:
---  Drill metal with high hardness, the rotational speed should be slower than normal drilling. Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Be careful and control your CNC speed.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$8.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Attributes:
* Drilling Diameter: 1.6mm / 0.063"
* Tool Flute Length: 19mm / 0.75"
* Shank Diameter: 1.6mm / 0.063"
* Overall Length: 38mm / 1.5"
* Material: K45 / P10 Tungsten Carbide
* Finish: Nanometer AlTiSin Coated
* Maximum Work Hardness: HRC65
* Tool Flute Type: Spiral
* Shank Type: Straight, Round

What Is Included:
* 1 Piece x Carbide Drill Bit

Applications & Features:
---The solid carbide drill bit is suitable for drilling high-hardness and difficult-to-machine materials below HRC65, such as alloy steel, stainless steel, tool steel, hardened steel. It is also widely used on aluminum, copper, hard plastic and wood. Use on machining centers, CNC lathes, drill presses and bench drills. The appropriate lubricant can facilitate cutting or cooling, improve dimensional accuracy and extending tool life.
--- K45/P10 tungsten carbide is a micro grain tungsten-cobalt alloy with higher hardness, better wear resistance, higher strength, better bending resistance and heat resistance. Provides faster cutting speeds than other substrates and is harder but more brittle. Carbide material with good drilling properties ensures high working efficiency. Nanometer AlTiSin composite coatings greatly increase the hardness, wear resistance and thermal stability. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips.

Useful Tips:
---  Drill metal with high hardness, the rotational speed should be slower than normal drilling. Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Be careful and control your CNC speed.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)