Home FabricatingMachiningDrill BitsTwist Drill BitsStraight Shank Drill Bits
Harfington PCB Drill Bits Solid Tungsten Carbide Precision Drilling - (Applications: for Print Circuit Board CNC Engraving)

PCB Drill Bits Solid Tungsten Carbide Precision Drilling - (Applications: for Print Circuit Board CNC Engraving)

ID:
$8.11 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
2.65mm
Size
About this item
  • ★ PCB Drill Bits Size --- Cutting edge diameter (CED): 2.65mm / 0.104"; shank diameter: 3.175mm / 1/8"; cutting edge length: 12mm / 0.472"; overall length: 38mm / 1-1/2"; tool flute type: spiral; point angle: 135 degree
  • ★ Wide Applications --- Widely used for drilling PCB (print circuit board), acrylic, plastics, aluminium, soft metal, fiberglass, wood, etc. Suitable for PCB drilling machines, engraving machines, CNC and high precision special drilling equipment.
  • ★ Sharp Cutting Edge --- Sharp cutting edge provides smooth drilling, low cutting force and drilling accuracy to prevent tool breakage. Large chip removal space, smooth chip removal, and low drilling heat.
  • ★ Solid Tungsten Carbide --- It has high hardness, wear resistance, high strength, resistance to bending and heat resistance, providing a precise and easy experience. With good milling and engraving performance, carbide materials can ensure high work efficiency.
  • ★ Useful Tips --- The mini drill bit is too tiny and easily twisted off. Be careful and control your CNC speed. The longer the chuck clamps, the better. If the clamping length is short, the feed rate and cutting speed should be reduced to reduce vibration and increase tool life.
  • In stock, ready to ship
Cart
Cart
About this item
  • ★ PCB Drill Bits Size --- Cutting edge diameter (CED): 2.65mm / 0.104"; shank diameter: 3.175mm / 1/8"; cutting edge length: 12mm / 0.472"; overall length: 38mm / 1-1/2"; tool flute type: spiral; point angle: 135 degree
  • ★ Wide Applications --- Widely used for drilling PCB (print circuit board), acrylic, plastics, aluminium, soft metal, fiberglass, wood, etc. Suitable for PCB drilling machines, engraving machines, CNC and high precision special drilling equipment.
  • ★ Sharp Cutting Edge --- Sharp cutting edge provides smooth drilling, low cutting force and drilling accuracy to prevent tool breakage. Large chip removal space, smooth chip removal, and low drilling heat.
  • ★ Solid Tungsten Carbide --- It has high hardness, wear resistance, high strength, resistance to bending and heat resistance, providing a precise and easy experience. With good milling and engraving performance, carbide materials can ensure high work efficiency.
  • ★ Useful Tips --- The mini drill bit is too tiny and easily twisted off. Be careful and control your CNC speed. The longer the chuck clamps, the better. If the clamping length is short, the feed rate and cutting speed should be reduced to reduce vibration and increase tool life.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Attributes:
* Cutting Edge Diameter (CED): 2.65mm / 0.104"
* Shank Diameter: 3.175mm / 1/8"
* Cutting Edge Length: 12mm / 0.472"
* Overall Length: 38mm / 1-1/2"
* Material: Tungsten Carbide
* Tool Flute Type: Spiral
* Tool Point Angle: 135 Degree

What Is Included:
* 8 Pieces x PCB Drill Bits

Applications & Features:
--- Widely used for drilling PCB (print circuit board), acrylic, plastics, aluminium, soft metal, fiberglass, wood, etc. Suitable for PCB drilling machines, engraving machines, CNC and high precision special drilling equipment. Use vertically and control your CNC speed well. Can work quickly and cleanly, no glitches or scrap left.
--- Tungsten carbide twist drill bits are high hardness, wear resistance, high strength, resistance to bending and heat resistance, providing a precise and easy experience. With good milling and engraving performance, carbide materials can run at higher speed than high-speed steel to ensure high work efficiency. Sharp cutting edge provides smooth drilling, low cutting force and drilling accuracy to prevent tool breakage. Large chip removal space, smooth chip removal, and low drilling heat.

Useful Tips:
--- The mini drill bit is too tiny and easily twisted off. Be careful and control your CNC speed. The longer the chuck clamps, the better. If the clamping length is short, the feed rate and cutting speed should be reduced to reduce vibration and increase tool life.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$8.11 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Attributes:
* Cutting Edge Diameter (CED): 2.65mm / 0.104"
* Shank Diameter: 3.175mm / 1/8"
* Cutting Edge Length: 12mm / 0.472"
* Overall Length: 38mm / 1-1/2"
* Material: Tungsten Carbide
* Tool Flute Type: Spiral
* Tool Point Angle: 135 Degree

What Is Included:
* 8 Pieces x PCB Drill Bits

Applications & Features:
--- Widely used for drilling PCB (print circuit board), acrylic, plastics, aluminium, soft metal, fiberglass, wood, etc. Suitable for PCB drilling machines, engraving machines, CNC and high precision special drilling equipment. Use vertically and control your CNC speed well. Can work quickly and cleanly, no glitches or scrap left.
--- Tungsten carbide twist drill bits are high hardness, wear resistance, high strength, resistance to bending and heat resistance, providing a precise and easy experience. With good milling and engraving performance, carbide materials can run at higher speed than high-speed steel to ensure high work efficiency. Sharp cutting edge provides smooth drilling, low cutting force and drilling accuracy to prevent tool breakage. Large chip removal space, smooth chip removal, and low drilling heat.

Useful Tips:
--- The mini drill bit is too tiny and easily twisted off. Be careful and control your CNC speed. The longer the chuck clamps, the better. If the clamping length is short, the feed rate and cutting speed should be reduced to reduce vibration and increase tool life.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)