Home Power TransmissionRotary MotionBearingsBall BearingsDeep Groove Ball Bearings
Harfington Uxcell Miniature Deep Groove Ball Bearings Open Type Chrome Steel Bearings

Uxcell Miniature Deep Groove Ball Bearings Open Type Chrome Steel Bearings

ID:
$5.40 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
6x13x3.5mm
Size
2pcs
Package Content
About This Item
  • 686 (I.D.=6mm, O.D.=13mm, Thickness=3.5mm)
  • 686 bearings are open type for lubricating
  • Made from Chrome Steel (GCr15), features with good anti-rust and corrosion resistance
  • ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
  • Static load rating of 354 newtons and dynamic load rating of 920 newtons
  • In stock, ready to ship
Cart
Cart
About This Item
  • 686 (I.D.=6mm, O.D.=13mm, Thickness=3.5mm)
  • 686 bearings are open type for lubricating
  • Made from Chrome Steel (GCr15), features with good anti-rust and corrosion resistance
  • ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
  • Static load rating of 354 newtons and dynamic load rating of 920 newtons
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven’t received the reply by then, please check your spam. Thank you!
Product Description:

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

 

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • These cost-effective bearings are widely used in areas with low requirements for hardness.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

Selecting Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

Specification:

Model: 686

Seal Type: Open Type

Inner Race/Outer Race Material: Chrome Steel (GCr15)

Cage Material: Stamping Steel

Inner Diameter (d): 6mm

Outer Diameter (D): 13mm

Thickness (B): 3.5mm

Dynamic Load Rating (Cr): 920N

Static Load Rating (Cor): 354N

Accuracy Class: P0 (ABEC-1)

Noise Level: Z2

Number of Pack: 2 Pcs

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products title ID Price Qty
Products title ID Price Qty
{[item.title]} {[item.id]} {['$' + item.price]}
Qty: {[total.qty]} Item(s)
Total Price: ${[total.price]}
View More

Description

Description

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

 

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • These cost-effective bearings are widely used in areas with low requirements for hardness.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

Selecting Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

Specification:

Model: 686

Seal Type: Open Type

Inner Race/Outer Race Material: Chrome Steel (GCr15)

Cage Material: Stamping Steel

Inner Diameter (d): 6mm

Outer Diameter (D): 13mm

Thickness (B): 3.5mm

Dynamic Load Rating (Cr): 920N

Static Load Rating (Cor): 354N

Accuracy Class: P0 (ABEC-1)

Noise Level: Z2

Number of Pack: 2 Pcs

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the {[currentShipping.abbr]} over {[currentShipping.price]}
Estimated shipping time will be within {[currentShipping.days]} days
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .