Home Power TransmissionRotary MotionBearingsBall BearingsDeep Groove Ball Bearings
Harfington Uxcell 626-2RS Deep Groove Ball Bearing 6x19x6mm Double Sealed Carbon Steel Bearings 5Pcs

Uxcell 626-2RS Deep Groove Ball Bearing 6x19x6mm Double Sealed Carbon Steel Bearings 5Pcs

ID:
$6.08 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • 626-2RS (I.D.: 6mm, O.D.: 19mm, Thickness: 6mm)
  • 626-2rs bearings are sealed on BOTH SIDES to keep lubricant in
  • Made from Carbon Steel, features with good anti-rust and corrosion resistance
  • ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
  • Static load rating of 1050 newtons and dynamic load rating of 2800 newtons
  • In stock, ready to ship
Cart
Cart
About this item
  • 626-2RS (I.D.: 6mm, O.D.: 19mm, Thickness: 6mm)
  • 626-2rs bearings are sealed on BOTH SIDES to keep lubricant in
  • Made from Carbon Steel, features with good anti-rust and corrosion resistance
  • ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
  • Static load rating of 1050 newtons and dynamic load rating of 2800 newtons
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

 

 

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

 

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

 

Specification:

Model: 626-2RS

Sealed Type: Double Sealed

Inner Race/Outer Race Meterial: Carbon Steel

Cage Material: Stamping Steel

Inner Diameter (d): 6mm

Outer Diameter (D): 19mm

Thickness (B): 6mm

Dynamic Load Rating (Cr): 2.80kN

Static Load Rating (Cor): 1.05kN

Accuracy Class: P0 (ABEC-1)

Noise Level: Z1

Number of Pack: 5Pcs

 

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$6.08 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20 Free upgraded to UPS over $200
By default, UPS or DHL or equivalent express delivery options will be selected, with an estimated delivery time of 4-7 days. Except for remote areas or extremely large volume products.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

 

 

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

 

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

 

Specification:

Model: 626-2RS

Sealed Type: Double Sealed

Inner Race/Outer Race Meterial: Carbon Steel

Cage Material: Stamping Steel

Inner Diameter (d): 6mm

Outer Diameter (D): 19mm

Thickness (B): 6mm

Dynamic Load Rating (Cr): 2.80kN

Static Load Rating (Cor): 1.05kN

Accuracy Class: P0 (ABEC-1)

Noise Level: Z1

Number of Pack: 5Pcs

 

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || '$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .