Home FabricatingMachiningHole SawsGlass Hole Saws
Harfington Uxcell 25mm Diamond Grit Hole Saw Drill Bit 2PCS for Tile Glass

Uxcell 25mm Diamond Grit Hole Saw Drill Bit 2PCS for Tile Glass

ID:
$6.77 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About This Item
  • SIZE - 25mm(1-inch) Drilling Diameter, 8mm(0.31-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
  • In stock, ready to ship
Cart
Cart
About This Item
  • SIZE - 25mm(1-inch) Drilling Diameter, 8mm(0.31-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven’t received the reply by then, please check your spam. Thank you!
Product Description:
  1. Designed for drilling 25mm diameter holes.
  2. Nickel-plated hole saw drill bit with a diamond dust coating offers superior performance and cutting strength.
  3. Cut clean and round holes to a depth of approximately 5mm.
  4. Excellent for making clean and accurate hole on glass, tile, marble and other fragile materials.
  5. Always use lubrication (water), otherwise the diamond coated drill bit will burn.
  6. Start your hole diagonally, make a round trace and then hold drill straight.
  7. Works better with an electric drill (Excluding in this item).

 

Specifications:

Product Name: Glass Hole Saw

Material: Metal

Body Coating: Nickel Plated

Tip Coating: Diamond Plated

Cutting Diameter: 25mm / 1-inch

Drilling Depth: 28mm / 1.1-inch

Shank Diameter: 8mm / 0.3-inch

Revolutions Per Minute: 800-1000

 

Package Contents: 

2 x Glass Hole Saws

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products title ID Price Qty
Products title ID Price Qty
{[item.title]} {[item.id]} {['$' + item.price]}
Qty: {[total.qty]} Item(s)
Total Price: ${[total.price]}
View More

Description

Description

  1. Designed for drilling 25mm diameter holes.
  2. Nickel-plated hole saw drill bit with a diamond dust coating offers superior performance and cutting strength.
  3. Cut clean and round holes to a depth of approximately 5mm.
  4. Excellent for making clean and accurate hole on glass, tile, marble and other fragile materials.
  5. Always use lubrication (water), otherwise the diamond coated drill bit will burn.
  6. Start your hole diagonally, make a round trace and then hold drill straight.
  7. Works better with an electric drill (Excluding in this item).

 

Specifications:

Product Name: Glass Hole Saw

Material: Metal

Body Coating: Nickel Plated

Tip Coating: Diamond Plated

Cutting Diameter: 25mm / 1-inch

Drilling Depth: 28mm / 1.1-inch

Shank Diameter: 8mm / 0.3-inch

Revolutions Per Minute: 800-1000

 

Package Contents: 

2 x Glass Hole Saws

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the {[currentShipping.abbr]} over {[currentShipping.price]}
Estimated shipping time will be within {[currentShipping.days]} days
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .