Home FabricatingMachiningEnd Mills & Milling CuttersCarbide End Mills
Harfington Uxcell Flat Nose End Mill Cutter CNC Router Bits Flute for Acrylic PVC MDF Hardwood

Uxcell Flat Nose End Mill Cutter CNC Router Bits Flute for Acrylic PVC MDF Hardwood

ID:
$28.71 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
5pcs
Package Content
0.8mm X 3mm
Size
About this item
  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8"; Cutting Diameter: 0.8mm / 0.03"; Cutting Length: 3mm / 0.12"; Overall Length: 38mm / 1.5"; Number of Flutes: 2 Flutes
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
  • In stock, ready to ship
Cart
Cart
About this item
  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8"; Cutting Diameter: 0.8mm / 0.03"; Cutting Length: 3mm / 0.12"; Overall Length: 38mm / 1.5"; Number of Flutes: 2 Flutes
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:

Specifications:

Product Name: End Mill Cutter

Material: Carbide

Shank Diameter: 3.175mm / 1/8"

Cutting Diameter: 0.8mm / 0.03"

Cutting Length: 3mm / 0.12"

Overall Length: 38mm / 1.5"

Number of Flutes: 2

Package Content: 5 x End Mill Cutter

 

1.Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.

2.Good for 2D relief sculpturing, cutting, engraving, slotting, milling, etc.

3.Carbide can run at higher speed than high-speed steel, resisting abrasion and high cutting temperature.

4.Cutting edge has high precision, sharper, harder hardness, higher wear resistance, higher strength, higher bending, less wear and tear, and long life.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
$28.71 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Specifications:

Product Name: End Mill Cutter

Material: Carbide

Shank Diameter: 3.175mm / 1/8"

Cutting Diameter: 0.8mm / 0.03"

Cutting Length: 3mm / 0.12"

Overall Length: 38mm / 1.5"

Number of Flutes: 2

Package Content: 5 x End Mill Cutter

 

1.Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.

2.Good for 2D relief sculpturing, cutting, engraving, slotting, milling, etc.

3.Carbide can run at higher speed than high-speed steel, resisting abrasion and high cutting temperature.

4.Cutting edge has high precision, sharper, harder hardness, higher wear resistance, higher strength, higher bending, less wear and tear, and long life.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)