Home DIY3D Printer Accessories3D Printer Nozzle
Harfington Uxcell 0.8mm 3D Printer Nozzle, Fit for MK8, for 1.75mm Filament Stainless Steel 5pcs

Uxcell 0.8mm 3D Printer Nozzle, Fit for MK8, for 1.75mm Filament Stainless Steel 5pcs

ID:
$7.32 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About This Item
  • Precise Design--The 1.75mm Input 0.4mm extruder nozzles produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer.
  • Cleaning Needles---The nozzle cleaning needles are very flexible and robust, easy to bend the needle into the nozzle and will not break. Good for handle tough extruder hot end nozzle clogs.
  • Material---The 3D printer nozzle is made of Stainless Steel material, sturdy and durable, connect with M6 out the thread, easy to install
  • Applicability and compatibility--- Fit for 3D Printer, for all 1.75mm PLA ABS 3D printers.
  • Note---After replacing the nozzle, please check the distance between the nozzle and build plate to ensure the quality of print parts.
  • In stock, ready to ship
Cart
Cart
About This Item
  • Precise Design--The 1.75mm Input 0.4mm extruder nozzles produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer.
  • Cleaning Needles---The nozzle cleaning needles are very flexible and robust, easy to bend the needle into the nozzle and will not break. Good for handle tough extruder hot end nozzle clogs.
  • Material---The 3D printer nozzle is made of Stainless Steel material, sturdy and durable, connect with M6 out the thread, easy to install
  • Applicability and compatibility--- Fit for 3D Printer, for all 1.75mm PLA ABS 3D printers.
  • Note---After replacing the nozzle, please check the distance between the nozzle and build plate to ensure the quality of print parts.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven’t received the reply by then, please check your spam. Thank you!
Product Description:

Feature:

Stamp size on the surface, convenient to pick the one you need.

The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.

Extruder stainless steel print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL, etc.

Specification:

Material: Stainless Steel

Screw Thread: M6

Thread Length: 5mm

Nozzle Diameter: 0.8mm

Input Diameter: 2mm

Fit Filament Diameter: 1.75mm

Overall Size: 13 x 6 mm / 0.51 x 0.24 inch (L*D)

Package Content:

5 x Nozzle

 

How to Replace Nozzles?

1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close the printer, take the spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.

3: Spanner keeps to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products title ID Price Qty
Products title ID Price Qty
{[item.title]} {[item.id]} {['$' + item.price]}
Qty: {[total.qty]} Item(s)
Total Price: ${[total.price]}
View More

Description

Description

Feature:

Stamp size on the surface, convenient to pick the one you need.

The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.

Extruder stainless steel print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL, etc.

Specification:

Material: Stainless Steel

Screw Thread: M6

Thread Length: 5mm

Nozzle Diameter: 0.8mm

Input Diameter: 2mm

Fit Filament Diameter: 1.75mm

Overall Size: 13 x 6 mm / 0.51 x 0.24 inch (L*D)

Package Content:

5 x Nozzle

 

How to Replace Nozzles?

1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close the printer, take the spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.

3: Spanner keeps to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the {[currentShipping.abbr]} over {[currentShipping.price]}
Estimated shipping time will be within {[currentShipping.days]} days
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .