Home DIY3D Printer Accessories3D Printer Nozzle
Harfington Uxcell 0.6mm 3D Printer Nozzle Head M6 Thread Replacement for MK8 1.75mm Extruder Print, Brass 10pcs

Uxcell 0.6mm 3D Printer Nozzle Head M6 Thread Replacement for MK8 1.75mm Extruder Print, Brass 10pcs

ID:
$7.60 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About This Item
  • [Size]: Thread: M6; Nozzle Diameter: 0.6mm; Input Diameter: 2mm; Total Dimension: 13x6mm / 0.51"x0.24" (L*D)
  • [Compatibility]: for 1.75mm Filament MK8 3D printers; Compared with mk7, mk8 has a larger lumen diameter and better support for PLA materials; the nozzle of this MK8 is an upgraded version of MK7, and its performance is better than that of MK7. MK7 is suitable for 3D printers, and MK8 nozzles are also suitable.
  • [Brass Material]: It has high strength, high hardness, and strong chemical resistance, at the same time it also has strong wear resistance and provides long service life.
  • [Good Design]: the chamfering is rounded, reducing the resistance of the edges and corners to the consumables, and avoiding plugging; the appearance is smooth and shiny with lettering, which allows you to better identify.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC, etc.
  • In stock, ready to ship
Cart
Cart
About This Item
  • [Size]: Thread: M6; Nozzle Diameter: 0.6mm; Input Diameter: 2mm; Total Dimension: 13x6mm / 0.51"x0.24" (L*D)
  • [Compatibility]: for 1.75mm Filament MK8 3D printers; Compared with mk7, mk8 has a larger lumen diameter and better support for PLA materials; the nozzle of this MK8 is an upgraded version of MK7, and its performance is better than that of MK7. MK7 is suitable for 3D printers, and MK8 nozzles are also suitable.
  • [Brass Material]: It has high strength, high hardness, and strong chemical resistance, at the same time it also has strong wear resistance and provides long service life.
  • [Good Design]: the chamfering is rounded, reducing the resistance of the edges and corners to the consumables, and avoiding plugging; the appearance is smooth and shiny with lettering, which allows you to better identify.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC, etc.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven’t received the reply by then, please check your spam. Thank you!
Product Description:

Feature:

Stamp size on the surface, convenient to pick the one you need.

The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon, etc.

Specification:

Material: Brass

Screw Thread: M6

Nozzle Diameter: 0.6mm

Input Diameter: 2mm

Total Dimension: 13x6mm / 0.51x0.24 inch (L*D) 

Package Content:

10 x Brass Nozzle 

NOTE: 

Small accessories, please keep away from children.

After replacing the nozzle, please recalibrate the distance between the nozzle and the build plate to ensure the quality of the print parts.

How to Replace Nozzles?

1: Turn on the 3D printer, heat the nozzle, and heat the block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close the printer, and take a spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid burning.

3: Spanner keeps holding the heart block, use the socket screwdriver to screw the new nozzle in, and make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products title ID Price Qty
Products title ID Price Qty
{[item.title]} {[item.id]} {['$' + item.price]}
Qty: {[total.qty]} Item(s)
Total Price: ${[total.price]}
View More

Description

Description

Feature:

Stamp size on the surface, convenient to pick the one you need.

The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon, etc.

Specification:

Material: Brass

Screw Thread: M6

Nozzle Diameter: 0.6mm

Input Diameter: 2mm

Total Dimension: 13x6mm / 0.51x0.24 inch (L*D) 

Package Content:

10 x Brass Nozzle 

NOTE: 

Small accessories, please keep away from children.

After replacing the nozzle, please recalibrate the distance between the nozzle and the build plate to ensure the quality of the print parts.

How to Replace Nozzles?

1: Turn on the 3D printer, heat the nozzle, and heat the block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close the printer, and take a spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid burning.

3: Spanner keeps holding the heart block, use the socket screwdriver to screw the new nozzle in, and make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the {[currentShipping.abbr]} over {[currentShipping.price]}
Estimated shipping time will be within {[currentShipping.days]} days
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .