Home Power TransmissionRotary MotionBearingsBall BearingsDeep Groove Ball Bearings
Harfington Uxcell Deep Groove Ball Bearings Metric Double Sealed Carbon Steel

Uxcell Deep Groove Ball Bearings Metric Double Sealed Carbon Steel

ID:
$7.09 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
10mmx19mmx5mm
Size
About This Item
  • Size: 6800-2RS (Inner Dia.=10mm, Outer Dia.=19mm, Thickness=5mm)
  • Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
  • Made from Carbon Steel, durability and resistance to under heavy loads
  • ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
  • Pre-Lubricated, Easy to maintain
  • In stock, ready to ship
Cart
Cart
About This Item
  • Size: 6800-2RS (Inner Dia.=10mm, Outer Dia.=19mm, Thickness=5mm)
  • Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
  • Made from Carbon Steel, durability and resistance to under heavy loads
  • ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
  • Pre-Lubricated, Easy to maintain
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven’t received the reply by then, please check your spam. Thank you!
Product Description:

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
  • With small friction and high-limit speed, Harfington's Deep Groove Ball Bearings are cost-effective and require little maintenance.
  • Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
  • Single-row, pre-lubricated, normal accuracy.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model: 6800-2RS

Sealed Type: Double Sealed

Material:High-Carbon Steel

Heat Treatment: Quenching

Hardness: HRC50-55

Cage Material: Stamping Steel

Inner Diameter (d): 10mm

Outer Diameter (D): 19mm

Thickness (B): 5mm

Dynamic Load Rating (Cr): 1.8kN

Static Load Rating (Cor): 0.93kN

Accuracy Class: P0 (ABEC-1)

Noise Level: Z1

Number of Pack: 10 Pcs

Weight: 56g

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products title ID Price Qty
Products title ID Price Qty
{[item.title]} {[item.id]} {['$' + item.price]}
Qty: {[total.qty]} Item(s)
Total Price: ${[total.price]}
View More

Description

Description

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
  • With small friction and high-limit speed, Harfington's Deep Groove Ball Bearings are cost-effective and require little maintenance.
  • Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
  • Single-row, pre-lubricated, normal accuracy.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model: 6800-2RS

Sealed Type: Double Sealed

Material:High-Carbon Steel

Heat Treatment: Quenching

Hardness: HRC50-55

Cage Material: Stamping Steel

Inner Diameter (d): 10mm

Outer Diameter (D): 19mm

Thickness (B): 5mm

Dynamic Load Rating (Cr): 1.8kN

Static Load Rating (Cor): 0.93kN

Accuracy Class: P0 (ABEC-1)

Noise Level: Z1

Number of Pack: 10 Pcs

Weight: 56g

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the {[currentShipping.abbr]} over {[currentShipping.price]}
Estimated shipping time will be within {[currentShipping.days]} days
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .