Reviews

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tad Grenga
Candelabra sockets for lantern fixture rewiring

I ordered these to rebuild a three-light wall mount outdoor lantern. The sockets and wiring were oxidized and shorted out. These are as stated 2.13 inches tall (best match on internet search) and nearly equalled the originals which were 2.0 inches tall. They have an ample integral wiring but it is 20 AWG and my originals were 18 AWG. All in all they fit perfectly. I will reorder more to rebuild a second lantern.

Home Electrical & LightingLightingLighting AccessoriesLamp SocketsBulb Lamp Holders

Bulb Socket Height Candelabra Base LED Lamp Holder with Wire and Lamp Pipes Nuts for Chandelier

Questions & Answers |
$9.04 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    10%OFF
  • Order $800+
    15%OFF
  • Order $2000+
    25%OFF
  • Order $5000+
    35%OFF
Wholesale Price
*Electric Mixed Wholesale Price. Free Shipping on orders over $200(by UPS/DHL Air Express).

3.74 Inch
SizeName
5
NumberOfItems
About This Item
  • Suitable for installing E12 bulbs with candelabra base. Good replacement when repairing lights such as guest room lights, crystal lights, chandeliers, wall lights and etc.
  • Power: 75W; Max Current: 1A; Max Voltage: AC 125V; Wire Length: 250mm / 9.8"; Socket Total Height: 95mm / 3.74"; Socket Size: 20x32mm / 0.79"x1.26" (D*H); Lamp Pipe Thread Size: M10*20mm (Thread Dia.*Thread Length); Lamp Pipe Thread Pitch: 1mm / 0.04"
  • The base has good heat resistance, long service life. The two copper contact points on the socket have good electrical conductivity, good for connecting with the bulb. The lamp pipes and nuts accessories are a good choice for the socket extension.
  • Install the product in the candle lamp body. Solder the two wires of the switch then go through the iron bracket. Finally inserted into the E12 bulb socket.
  • Please check the bulb size before buying.
  • In stock, ready to ship
Cart
Cart
About This Item
  • Suitable for installing E12 bulbs with candelabra base. Good replacement when repairing lights such as guest room lights, crystal lights, chandeliers, wall lights and etc.
  • Power: 75W; Max Current: 1A; Max Voltage: AC 125V; Wire Length: 250mm / 9.8"; Socket Total Height: 95mm / 3.74"; Socket Size: 20x32mm / 0.79"x1.26" (D*H); Lamp Pipe Thread Size: M10*20mm (Thread Dia.*Thread Length); Lamp Pipe Thread Pitch: 1mm / 0.04"
  • The base has good heat resistance, long service life. The two copper contact points on the socket have good electrical conductivity, good for connecting with the bulb. The lamp pipes and nuts accessories are a good choice for the socket extension.
  • Install the product in the candle lamp body. Solder the two wires of the switch then go through the iron bracket. Finally inserted into the E12 bulb socket.
  • Please check the bulb size before buying.
Free Shipping to the {[currentShipping.abbr]} over {[currentShipping.price]}
Estimated shipping time will be within {[currentShipping.days]} days
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .
Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven’t received the reply by then, please check your spam. Thank you!
Product Description:
What is this?
Suitable for installing E12 bulbs with candelabra base. Good replacement when repairing lights such as guest room lights, crystal lights, chandeliers, wall lights and etc.

What will I get?
Color: Black, Silver Tone
Material: Plastic, Copper
Power: 75W
Max Current: 1A
Max Voltage: AC 125V
Wire Length: 250mm / 9.8"
Socket Total Height: 95mm / 3.74"
Socket Size: 20x32mm / 0.79"x1.26" (D*H)
Lamp Pipe Thread Size: M10*20mm (Thread Dia.*Thread Length)
Lamp Pipe Thread Pitch: 1mm / 0.04"
Package Content: 5 x E12 Bulb Socket

Are there any advantages of the product?
The base has good heat resistance, long service life. The two copper contact points on the socket have good electrical conductivity, good for connecting with the bulb. The lamp pipes and nuts accessories are a good choice for the socket extension.

How to use it?
Install the product in the candle lamp body. Solder the two wires of the switch then go through the iron bracket. Finally inserted into the E12 bulb socket.

What should  I notice?
Please check the bulb size before buying.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Specification

Description

Description

What is this?
Suitable for installing E12 bulbs with candelabra base. Good replacement when repairing lights such as guest room lights, crystal lights, chandeliers, wall lights and etc.

What will I get?
Color: Black, Silver Tone
Material: Plastic, Copper
Power: 75W
Max Current: 1A
Max Voltage: AC 125V
Wire Length: 250mm / 9.8"
Socket Total Height: 95mm / 3.74"
Socket Size: 20x32mm / 0.79"x1.26" (D*H)
Lamp Pipe Thread Size: M10*20mm (Thread Dia.*Thread Length)
Lamp Pipe Thread Pitch: 1mm / 0.04"
Package Content: 5 x E12 Bulb Socket

Are there any advantages of the product?
The base has good heat resistance, long service life. The two copper contact points on the socket have good electrical conductivity, good for connecting with the bulb. The lamp pipes and nuts accessories are a good choice for the socket extension.

How to use it?
Install the product in the candle lamp body. Solder the two wires of the switch then go through the iron bracket. Finally inserted into the E12 bulb socket.

What should  I notice?
Please check the bulb size before buying.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show More
Ask a Question
{[failedMsg]}
Tips: For questions about your order, product discount, delivery time, shipping, payment and other questions unrelated to the product, please contact customer service.
Answer a Question
{[answerFailedMsg]}

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tad Grenga
Candelabra sockets for lantern fixture rewiring

I ordered these to rebuild a three-light wall mount outdoor lantern. The sockets and wiring were oxidized and shorted out. These are as stated 2.13 inches tall (best match on internet search) and nearly equalled the originals which were 2.0 inches tall. They have an ample integral wiring but it is 20 AWG and my originals were 18 AWG. All in all they fit perfectly. I will reorder more to rebuild a second lantern.