Home Automobiles & MotorcyclesSensorsIntake Manifold Pressure Sensor
Harfington No.0798007430 Manifold Absolute Pressure MAP Sensor for HONDA CBR600RR 2006-2019

No.0798007430 Manifold Absolute Pressure MAP Sensor for HONDA CBR600RR 2006-2019

ID:
£18.00 Regular price
/
About this item
  • Fitment: for HONDA CBR600RR 2006-2019.
  • OE Number:0798007430
  • Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit.
  • Feature: Made of good quality material. It is stable and durable, use for a long time.
  • Installation: 1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.6.Test: To drive and check loose/solder issues.
  • In stock, ready to ship
Cart
Cart
About this item
  • Fitment: for HONDA CBR600RR 2006-2019.
  • OE Number:0798007430
  • Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit.
  • Feature: Made of good quality material. It is stable and durable, use for a long time.
  • Installation: 1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.6.Test: To drive and check loose/solder issues.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Fitment:
  • for HONDA CBR600RR 2006-2019
OE Number:
  • 0798007430
Product Characteristics:
  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.
Package included:
  • 1 Pc MAP Sensor
Installation:
  • 1. Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3. ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4. Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5. Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.
  • 6. Test: To drive and check loose/solder issues.
Note:
  • This is a non-OEM product, accessory ONLY!
  • Please make sure your model's ENGINE and TRIM are as described before purchasing!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£18.00 Regular price
/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Fitment:
  • for HONDA CBR600RR 2006-2019
OE Number:
  • 0798007430
Product Characteristics:
  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.
Package included:
  • 1 Pc MAP Sensor
Installation:
  • 1. Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3. ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4. Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5. Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.
  • 6. Test: To drive and check loose/solder issues.
Note:
  • This is a non-OEM product, accessory ONLY!
  • Please make sure your model's ENGINE and TRIM are as described before purchasing!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)