Home Automobiles & MotorcyclesSensorsFuel Level SensorFuel Level Sensor
Harfington 430mm Fuel Sending Unit and Gauge Kit 16.9" Boat Fuel Tank Sending Unit Fuel Water Level Sensor and Fuel Gauge for Boat Car Truck RV

430mm Fuel Sending Unit and Gauge Kit 16.9" Boat Fuel Tank Sending Unit Fuel Water Level Sensor and Fuel Gauge for Boat Car Truck RV

ID:
£50.00 Regular price
/
About this item
  • Fit for:Read accurately the fuel gas gauge displays the water gas fuel level information in the boat marine RV car truck tank, no need to worry about how much water gas fuel is left.
  • Product Information:The maritime gasoline sender unit can be easily severed, depending on the depth of the tank. It is capable of flexible movement in confined areas, in the correct direction, by loosening the central screw for rotation and subsequently tightening it again. Alternatively, it can be cut as needed.
  • Details:The Fuel/Water Level Sensor with standard output of 240-33 ohm.
  • How to use:To ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.
  • Tip:Along with the tank's adjacent wall or baffle, there must be a minimum of one inch (25 mm) of space between the float retaining collar and the tank bottom.
  • In stock, ready to ship
Cart
Cart
About this item
  • Fit for:Read accurately the fuel gas gauge displays the water gas fuel level information in the boat marine RV car truck tank, no need to worry about how much water gas fuel is left.
  • Product Information:The maritime gasoline sender unit can be easily severed, depending on the depth of the tank. It is capable of flexible movement in confined areas, in the correct direction, by loosening the central screw for rotation and subsequently tightening it again. Alternatively, it can be cut as needed.
  • Details:The Fuel/Water Level Sensor with standard output of 240-33 ohm.
  • How to use:To ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.
  • Tip:Along with the tank's adjacent wall or baffle, there must be a minimum of one inch (25 mm) of space between the float retaining collar and the tank bottom.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Fit for:
  • The Marine sending unit is suitable for cars and ships, trucks, buses, boats, etc.
Product Information:
  • Output Signal: 240-33 ohm
  • Materials: Metal
  • Length: 430mm /16.93"
Product Highlights:
  • A durable fuel water-sending unit is intended for a long service life.
  • The fuel sensor is easy to install and use, fix the sensor, then connect the wiring and it will start working.
  • Fuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generators/generator sets, and marine field.
Made of:
  • Applying the principle of the magnetic field to control the reed on-off switch, featuring strong corrosion resistance, long using life, anti-vibration, anti-explosion, etc.
How to use:
  • How to use fuel gas sender:
  • 1. Just connect a ground blue wire from the marine fuel sending unit to a common grounding hook-up. The blue wire connects to the negative pole of the power supply.
  • 2. And connect the signal red wire from the fuel level sending unit to the gauge hook-up.
Content:
  • 1 Set Fuel Sending Unit and Gauge
Tip:
  • Please allow 1-2mm error due to manual measurement.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£50.00 Regular price
/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Fit for:
  • The Marine sending unit is suitable for cars and ships, trucks, buses, boats, etc.
Product Information:
  • Output Signal: 240-33 ohm
  • Materials: Metal
  • Length: 430mm /16.93"
Product Highlights:
  • A durable fuel water-sending unit is intended for a long service life.
  • The fuel sensor is easy to install and use, fix the sensor, then connect the wiring and it will start working.
  • Fuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generators/generator sets, and marine field.
Made of:
  • Applying the principle of the magnetic field to control the reed on-off switch, featuring strong corrosion resistance, long using life, anti-vibration, anti-explosion, etc.
How to use:
  • How to use fuel gas sender:
  • 1. Just connect a ground blue wire from the marine fuel sending unit to a common grounding hook-up. The blue wire connects to the negative pole of the power supply.
  • 2. And connect the signal red wire from the fuel level sending unit to the gauge hook-up.
Content:
  • 1 Set Fuel Sending Unit and Gauge
Tip:
  • Please allow 1-2mm error due to manual measurement.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)