Home FabricatingMachiningTapsTaps
Harfington 3pcs Hand Tap Set 7/16"-20 UNF Taper/Plug/Bottom Left Hand Thread Tapping Tool

3pcs Hand Tap Set 7/16"-20 UNF Taper/Plug/Bottom Left Hand Thread Tapping Tool

ID:
£20.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • Hand Tap Set: Thread size: 7/16"-20 UNF (left hand); square shank width: 7mm / 0.28"; thread length: 27mm / 1.06"; total length: 85mm / 3.35"; accuracy: 2B. M2 (6542) high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance.
  • Three Styles: Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes. Plug Tap: Creates deeper threads than taper taps, suitable for through-hole and blind-hole applications. Bottom Tap: Generate threads close to the bottom of a blind hole.
  • Widely Used: Hand tap set is used to re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic. Provides fast downward chip removal for efficient threading.
  • Hand Threading Taps: The tapping tool kit is mainly for hand use, and is used with a tap wrench. Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable screw taps.
  • Tips: Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation.
  • In stock, ready to ship
Cart
Cart
About this item
  • Hand Tap Set: Thread size: 7/16"-20 UNF (left hand); square shank width: 7mm / 0.28"; thread length: 27mm / 1.06"; total length: 85mm / 3.35"; accuracy: 2B. M2 (6542) high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance.
  • Three Styles: Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes. Plug Tap: Creates deeper threads than taper taps, suitable for through-hole and blind-hole applications. Bottom Tap: Generate threads close to the bottom of a blind hole.
  • Widely Used: Hand tap set is used to re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic. Provides fast downward chip removal for efficient threading.
  • Hand Threading Taps: The tapping tool kit is mainly for hand use, and is used with a tap wrench. Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable screw taps.
  • Tips: Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Taper/Plug/Bottom Tap Set:
  • Thread Size: 7/16"-20 UNF
  • Square Shank Width: 7mm / 0.28"
  • Thread Length: 27mm / 1.06"
  • Total Length: 85mm / 3.35"
  • Accuracy: 2B
  • Tapping Direction: Left Hand
  • Material: M2 (6542) High Speed Steel 
  • Package Content: 1pcs x Taper Tap, 1pcs x Plug Tap, 1pcs x Bottom Tap
Descriptions:
  1. M2 (6542) high-speed steel hand tap set offers high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated thread taps can be used for threading a wide range of applications. Clear threads without burrs, universal square shank.
  2. Three Styles: Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes; Plug Tap: Creates deeper threads than taper taps, suitable for through-hole and blind-hole applications; Bottom Tap: Generate threads close to the bottom of a blind hole.
  3. The hand tap set is used to re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic. Straight flute tap provides fast downward chip removal for efficient threading.
  4. The tapping tool kit is mainly for hand use, and is used with a tap wrench. Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable screw taps.
  5. Tips: Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£20.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Taper/Plug/Bottom Tap Set:
  • Thread Size: 7/16"-20 UNF
  • Square Shank Width: 7mm / 0.28"
  • Thread Length: 27mm / 1.06"
  • Total Length: 85mm / 3.35"
  • Accuracy: 2B
  • Tapping Direction: Left Hand
  • Material: M2 (6542) High Speed Steel 
  • Package Content: 1pcs x Taper Tap, 1pcs x Plug Tap, 1pcs x Bottom Tap
Descriptions:
  1. M2 (6542) high-speed steel hand tap set offers high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated thread taps can be used for threading a wide range of applications. Clear threads without burrs, universal square shank.
  2. Three Styles: Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes; Plug Tap: Creates deeper threads than taper taps, suitable for through-hole and blind-hole applications; Bottom Tap: Generate threads close to the bottom of a blind hole.
  3. The hand tap set is used to re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic. Straight flute tap provides fast downward chip removal for efficient threading.
  4. The tapping tool kit is mainly for hand use, and is used with a tap wrench. Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable screw taps.
  5. Tips: Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)