Home FabricatingMachiningEnd Mills & Milling CuttersCarbide End Mills
Harfington 0.6mm x 6mm Carbide Long Reach 2 Flutes Square Nose End Mill Cutter

0.6mm x 6mm Carbide Long Reach 2 Flutes Square Nose End Mill Cutter

ID:
£10.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • ★ Square Nose End Mill Size --- Cutting diameter: 0.6mm / 0.024", effective cutting length: 6mm / 0.24" ( flute length: 2mm / 0.08"; extended neck length: 4mm / 0.16"), shank diameter: 4mm / 0.16", total length: 50mm / 2", cutting hardness: HRC55.
  • ★ Wide Applications --- Suitable for creating flat-bottomed slots, pockets, or profiles, and for machining aluminum, aluminum alloy, copper, plastic, and wood. Designed with an extended neck (long reach) to provide extra reach and clearance for machining deep or hard-to-reach areas.
  • ★Ease of Use --- Sharp square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during machining. Used with CNC milling machines, router machines, and engraving machines.
  • ★ Ultra-fine Grain Carbide --- Provides excellent hardness (HRC90), wear resistance, high strength, good toughness and heat resistance. Designed without additional coatings, it is commonly used in a variety of general purpose milling applications.
  • ★ Useful Tips --- Make sure it is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. Excessive heat can affect tool life and performance.
  • In stock, ready to ship
Cart
Cart
About this item
  • ★ Square Nose End Mill Size --- Cutting diameter: 0.6mm / 0.024", effective cutting length: 6mm / 0.24" ( flute length: 2mm / 0.08"; extended neck length: 4mm / 0.16"), shank diameter: 4mm / 0.16", total length: 50mm / 2", cutting hardness: HRC55.
  • ★ Wide Applications --- Suitable for creating flat-bottomed slots, pockets, or profiles, and for machining aluminum, aluminum alloy, copper, plastic, and wood. Designed with an extended neck (long reach) to provide extra reach and clearance for machining deep or hard-to-reach areas.
  • ★Ease of Use --- Sharp square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during machining. Used with CNC milling machines, router machines, and engraving machines.
  • ★ Ultra-fine Grain Carbide --- Provides excellent hardness (HRC90), wear resistance, high strength, good toughness and heat resistance. Designed without additional coatings, it is commonly used in a variety of general purpose milling applications.
  • ★ Useful Tips --- Make sure it is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. Excessive heat can affect tool life and performance.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Attributes:
* Cutting Diameter: 0.6mm / 0.024"
* Effective Cutting Length: 6mm / 0.24" ( Flute Length: 2mm / 0.08"; Extended Neck Length: 4mm / 0.16")
* Shank Diameter: 4mm / 0.16"
* Total Length: 50mm / 2"
* Material: Ultra-fine Grain Carbide
* Finish: Uncoated
* Cutting Hardness: HRC55

What Is Included:
* 1 Piece x Square Nose End Mill

Applications & Features:
--- The square nose end mill is suitable for creating flat-bottomed slots, pockets, or profiles. Used for machining aluminum, aluminum alloy, copper, plastic, and wood. The end mill can be used with CNC milling machines, router machines, and engraving machines.
--- This end mill is designed with an extended neck (long reach) to provide extra reach and clearance for machining deep or hard-to-reach areas. Square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during working.
--- The ultra-fine grain carbide provides excellent hardness (HRC90), wear resistance, good toughness, high strength, and good thermal stability (heat resistance). Designed without additional coatings, it is commonly used in a variety of general purpose milling applications.. It also helps minimize built-up edge formation, and contributes to a smoother surface finish.

Useful Tips:
--- Make sure the end mil is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation. Excessive heat can affect tool life and performance. Monitor and control the cutting parameters, ensure proper cooling or lubrication and effective chip evacuation to prevent clogging.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£10.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Attributes:
* Cutting Diameter: 0.6mm / 0.024"
* Effective Cutting Length: 6mm / 0.24" ( Flute Length: 2mm / 0.08"; Extended Neck Length: 4mm / 0.16")
* Shank Diameter: 4mm / 0.16"
* Total Length: 50mm / 2"
* Material: Ultra-fine Grain Carbide
* Finish: Uncoated
* Cutting Hardness: HRC55

What Is Included:
* 1 Piece x Square Nose End Mill

Applications & Features:
--- The square nose end mill is suitable for creating flat-bottomed slots, pockets, or profiles. Used for machining aluminum, aluminum alloy, copper, plastic, and wood. The end mill can be used with CNC milling machines, router machines, and engraving machines.
--- This end mill is designed with an extended neck (long reach) to provide extra reach and clearance for machining deep or hard-to-reach areas. Square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during working.
--- The ultra-fine grain carbide provides excellent hardness (HRC90), wear resistance, good toughness, high strength, and good thermal stability (heat resistance). Designed without additional coatings, it is commonly used in a variety of general purpose milling applications.. It also helps minimize built-up edge formation, and contributes to a smoother surface finish.

Useful Tips:
--- Make sure the end mil is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation. Excessive heat can affect tool life and performance. Monitor and control the cutting parameters, ensure proper cooling or lubrication and effective chip evacuation to prevent clogging.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)