Home FabricatingMachiningDrill BitsTwist Drill BitsStraight Shank Drill Bits
Harfington Drill Bit, #16 (4.496mm) Cutting Diameter, 4341 135° Gold Number, 10-Pieces

Drill Bit, #16 (4.496mm) Cutting Diameter, 4341 135° Gold Number, 10-Pieces

ID:
£10.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • ★ Drill Bit Size --- Cutting edge diameter: #16 (4.496mm); shank diameter: #16; cutting edge length: 55mm / 2.17"; overall length: 85mm / 3.35", Included: 10 Pieces x Mini Drill Bits
  • ★PRACTICAL PERFORMANCE --- The micro drill bits offers excellent toughness, combining a gold finish and a 135° Angle design. It has significant advantages in processing performance and cost-effectiveness, achieving superior processing at low cost and striking a perfect balance between cost and quality.
  • ★ Wide Applications --- For acrylic, plastic, wood, soft metals (Cu, Al alloys), carbon steel, cast iron & thin stainless steel, this tiny drill bits are suitable for vehicle maintenance like sheet metal, bolt holes, brackets, wire harness mounts. (not to be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.)
  • ★ 4341 High-Speed Steel (HSS) --- Offers high hardness, excellent wear resistance, and good toughness. It is a versatile drill bit suitable for machining medium- to low-hardness materials.
  • ★ Useful Tips --- Ensure the micro drill bits is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation. ​​For beginners: Always verify proper speed and feed rates before formal workpiece machining.
  • In stock, ready to ship
Cart
Cart
About this item
  • ★ Drill Bit Size --- Cutting edge diameter: #16 (4.496mm); shank diameter: #16; cutting edge length: 55mm / 2.17"; overall length: 85mm / 3.35", Included: 10 Pieces x Mini Drill Bits
  • ★PRACTICAL PERFORMANCE --- The micro drill bits offers excellent toughness, combining a gold finish and a 135° Angle design. It has significant advantages in processing performance and cost-effectiveness, achieving superior processing at low cost and striking a perfect balance between cost and quality.
  • ★ Wide Applications --- For acrylic, plastic, wood, soft metals (Cu, Al alloys), carbon steel, cast iron & thin stainless steel, this tiny drill bits are suitable for vehicle maintenance like sheet metal, bolt holes, brackets, wire harness mounts. (not to be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.)
  • ★ 4341 High-Speed Steel (HSS) --- Offers high hardness, excellent wear resistance, and good toughness. It is a versatile drill bit suitable for machining medium- to low-hardness materials.
  • ★ Useful Tips --- Ensure the micro drill bits is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation. ​​For beginners: Always verify proper speed and feed rates before formal workpiece machining.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Attributes:
* Cutting Edge Diameter: #16 (4.496mm)
* Shank Diameter: #16
* Cutting Edge Length: 55mm / 2.17"
* Overall Length: 85mm / 3.35"
* Material: 4341 High-Speed Steel
* Finish: Gold
* Cutting Angle: 135 Degrees
* Style: Straight Shank

What Is Included:
* 10 Pieces x Micro Drill Bit

Applications & Features:
---Applicable materials: Acrylic, plastic, and wood. soft metals such as copper, aluminum alloys, carbon steel, cast iron, and stainless steel thin plates (use with caution for thick plates)
---Applications: The 4341 High-Speed Steel (HSS) Twist Drill is a versatile drill bit suitable for machining medium- to low-hardness materials, commonly used in vehicle maintenance for tasks like drilling sheet metal fasteners, replacing bolt holes, installing brackets, and creating wire harness mounts (non-precision applications),
--- The 4341 high-speed steel (HSS) offers high hardness, excellent wear resistance, and good toughness.
--- Gold finish can enhance the corrosion and wear resistance of twist drills
--- The 135° point angle ensures superior machining stability, delivers higher drilling accuracy, and enables smoother chip evacuation

Useful Tips:
---The 4341 high-speed steel (HSS) drill bit is designed for medium-to-low load machining and should not be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.
---Drill Bit Clamping: The drill bit must be securely clamped, but excessive force must be avoided.  Ensure the drill bit is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation.
---Test Drilling on Scrap Material: Always perform a test drill on scrap material first to verify proper speed and feed rates before machining the actual workpiece.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£10.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Attributes:
* Cutting Edge Diameter: #16 (4.496mm)
* Shank Diameter: #16
* Cutting Edge Length: 55mm / 2.17"
* Overall Length: 85mm / 3.35"
* Material: 4341 High-Speed Steel
* Finish: Gold
* Cutting Angle: 135 Degrees
* Style: Straight Shank

What Is Included:
* 10 Pieces x Micro Drill Bit

Applications & Features:
---Applicable materials: Acrylic, plastic, and wood. soft metals such as copper, aluminum alloys, carbon steel, cast iron, and stainless steel thin plates (use with caution for thick plates)
---Applications: The 4341 High-Speed Steel (HSS) Twist Drill is a versatile drill bit suitable for machining medium- to low-hardness materials, commonly used in vehicle maintenance for tasks like drilling sheet metal fasteners, replacing bolt holes, installing brackets, and creating wire harness mounts (non-precision applications),
--- The 4341 high-speed steel (HSS) offers high hardness, excellent wear resistance, and good toughness.
--- Gold finish can enhance the corrosion and wear resistance of twist drills
--- The 135° point angle ensures superior machining stability, delivers higher drilling accuracy, and enables smoother chip evacuation

Useful Tips:
---The 4341 high-speed steel (HSS) drill bit is designed for medium-to-low load machining and should not be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.
---Drill Bit Clamping: The drill bit must be securely clamped, but excessive force must be avoided.  Ensure the drill bit is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation.
---Test Drilling on Scrap Material: Always perform a test drill on scrap material first to verify proper speed and feed rates before machining the actual workpiece.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)