Home Fastening & JoiningFastenersScrews & BoltsStandard Bolts
Harfington 20Pcs 1/4x15 (1/4-20UNC) Ceiling Fan Blade Screws, Silver

20Pcs 1/4x15 (1/4-20UNC) Ceiling Fan Blade Screws, Silver

ID:
£7.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
  • Ceiling Fan Blade Screws Color: Silver; Material: Carbon Steel; Total Size: 8.6 x 18mm/0.34 x 0.71 Inch(DxL); Thread Size: 1/4”-20 UNC; Thread Length: 15mm/0.59 Inch.
  • Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise. Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings. Universal Fit: Suitable for Most ceiling fans. Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
  • 1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws. 2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket. 3. Insert & Tighten: Hand-start the screw, then secure diagonally
  • 1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts. 2. Compatibility: For wood/composite blades only; Metal blades require longer screws. 3. Storage: Keep in sealed bag to prevent washer oxidation. 4. Replacement Tip: Replace all screws per fan.
  • In stock, ready to ship
Cart
Cart
About this item
  • These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
  • Ceiling Fan Blade Screws Color: Silver; Material: Carbon Steel; Total Size: 8.6 x 18mm/0.34 x 0.71 Inch(DxL); Thread Size: 1/4”-20 UNC; Thread Length: 15mm/0.59 Inch.
  • Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise. Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings. Universal Fit: Suitable for Most ceiling fans. Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
  • 1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws. 2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket. 3. Insert & Tighten: Hand-start the screw, then secure diagonally
  • 1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts. 2. Compatibility: For wood/composite blades only; Metal blades require longer screws. 3. Storage: Keep in sealed bag to prevent washer oxidation. 4. Replacement Tip: Replace all screws per fan.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
What is this?
These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.

What will i get?
Ceiling Fan Blade Screws
Color: Silver;
Material: Carbon Steel;
Total Size: 8.6 x 18mm/0.34 x 0.71 Inch (DxL);
Thread Size: 1/4“-20 UNC;
Thread Length: 15mm/0.59 Inch.

Are there any advantages of the product?
Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.
Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.
Universal Fit: Suitable for Most ceiling fans.
Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
 
How to use it?
1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.
2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.
3. Insert & Tighten: Hand-start the screw, then secure diagonally

What should I notice?
1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.
2. Compatibility: For wood/composite blades only; Metal blades require longer screws.
3. Storage: Keep in a sealed bag to prevent washer oxidation.
4. Replacement Tip: Replace all screws per fan.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£7.00 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

What is this?
These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.

What will i get?
Ceiling Fan Blade Screws
Color: Silver;
Material: Carbon Steel;
Total Size: 8.6 x 18mm/0.34 x 0.71 Inch (DxL);
Thread Size: 1/4“-20 UNC;
Thread Length: 15mm/0.59 Inch.

Are there any advantages of the product?
Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.
Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.
Universal Fit: Suitable for Most ceiling fans.
Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
 
How to use it?
1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.
2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.
3. Insert & Tighten: Hand-start the screw, then secure diagonally

What should I notice?
1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.
2. Compatibility: For wood/composite blades only; Metal blades require longer screws.
3. Storage: Keep in a sealed bag to prevent washer oxidation.
4. Replacement Tip: Replace all screws per fan.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)