Home FabricatingMachiningDiesRound Dies
Harfington Round Threading Dies Metric Thread Adjustable Right Hand High-Speed Steel (HSS) Round Die Screw Thread Cutting Dies for Thread Repair

Round Threading Dies Metric Thread Adjustable Right Hand High-Speed Steel (HSS) Round Die Screw Thread Cutting Dies for Thread Repair

ID:
£9.00
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
M19 x 1.25
Size
About this item
  • Size - Metric Thread Size: M19 x 1.25; Outer Diameter: 38mm / 1.5"; Thickness: 12mm / 0.47"; Cutting Direction: Right Hand; Style: Adjustable Die. The round die can process, correct, or clean external threads.
  • Material - Metric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.
  • Features - Conical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1/4 to 1/2 turn to facilitate the discharge of chips from the chip removal hole.
  • Applications - Perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.
  • Note - Proper lubricating oil should be added to the cutting edge of the die When tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.
  • In stock, ready to ship
Cart
0
0
Cart
About this item
  • Size - Metric Thread Size: M19 x 1.25; Outer Diameter: 38mm / 1.5"; Thickness: 12mm / 0.47"; Cutting Direction: Right Hand; Style: Adjustable Die. The round die can process, correct, or clean external threads.
  • Material - Metric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.
  • Features - Conical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1/4 to 1/2 turn to facilitate the discharge of chips from the chip removal hole.
  • Applications - Perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.
  • Note - Proper lubricating oil should be added to the cutting edge of the die When tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
  1. Metric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.
  2. Conical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1/4 to 1/2 turn to facilitate the discharge of chips from the chip removal hole.
  3. The thread die is perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.
  4. Proper lubricating oil should be added to the cutting edge of the die when tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£9.00
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
0
0
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Description
  1. Metric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.
  2. Conical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1/4 to 1/2 turn to facilitate the discharge of chips from the chip removal hole.
  3. The thread die is perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.
  4. Proper lubricating oil should be added to the cutting edge of the die when tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
  1. Metric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.
  2. Conical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1/4 to 1/2 turn to facilitate the discharge of chips from the chip removal hole.
  3. The thread die is perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.
  4. Proper lubricating oil should be added to the cutting edge of the die when tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Free Return

Thank you for choosing Harfington!

We make things easy for you, you will enjoy a 30-day free return (within the US) after receiving your items!

In other regions, we do not provide pre-paid return labels and you are responsible for covering shipping costs to return.

If you are not completely satisfied with your product for any reason, we will gladly sort out a solution for you. Once you want to return or refund the order, please Contact Us and our agents will contact you in 1-2 business days.

The return process

1. Contact us 

Contact our Customer Service via email [email protected] or website, prepare the proof of purchase and the reason of return.

For wholesale orders, please contact directly [email protected] for faster service.

2. Return & Refund

    If you decide to return an item that is not defective, you’re eligible for a 30-day unconditional return since you’ve received it. Our Customer Service team will send you an address for receiving your return items, it takes 3-5 business days to process your return and issue the refund after our warehouse received the items.

    Matters needing attention

    All returned items should include the following:

    •  Original packaging (including original box, plastics foam, bubble wrap, bags, etc.)

    •  Original intact UPC barcode. Removal of the UPC code voids any possibility of the return request being honored.

    •  All accessories, including cords, cases, transformers, parts, batteries, assembly tools, etc.

    •  All manufacturer instruction manuals, warranty cards, and other documents.

     

    *Return Policy Exceptions

    1.Return Shipping is free only for the first return per order.

    2.If you have already returned item(s) from an order but would like to make additional returns of item(s) in the same order, you can use the Return Label we provided, and $6.99 shipping fee will be deducted from your refund.

    3.For orders sent to the US and under $50, Harfington will provide the return label. For orders sent to other conturies or over $50, Harfington will not provide the return label. 

    4.If our warehouse detect worn, damaged, or missing on the return items,  Harfington reserve the rights to cancel the refund.

    5.Defective Items or Wrong Items. If you receive an item that is wrong, defective, or broken, within 30 days of the date since you’ve received it, Harfington will exchange a new item to you or 100% refund it.

    6.Non-returnable Items. Some of our products(eg. Customized product) are not under the service of 30-day unconditional returns. We will tag these products on the detail page and your orders.

    7.Larger Items. Some items require special shipping and handling. Some larger items may require a freight carrier or may exceed the weight limits allowed, if you want to return a larger item, please contact our Customer Service.

    8.For non-quality issues (such as personal reason) , customer will be responsible for paying the return shipping fees and any customs fees or duties incurred during the return process.

    9.For wholesale orders  According to the specific order situation, we provide different solutions. If your wholesale order is not finished production, we will cancel the order and issue a full refund. If your wholesale order has been produced and is being processed, 30%~60% of the order amount will be used as a deposit and will not be refunded. Any questions about order cancelation, please contact us.

      If you have any issues with your return or refund, please contact the Customer Service team, we are happy to help!

      Wholesale Inquiry
      * Product Name
      * Quantity(Each)
      * Email Address
      Customer Name
      Expected Arrival Time
      Customer Note
      0/990
      Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
      If you want to consult the bulk order, you can submit a inquiry or contact us .

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      View Full Details
      {[product.title]}
      {[handleCurrency(product.price)]}