Home Electrical & LightingLightingLED LightsCOB LED Lights
Harfington COB LED Chip 1W 5V LED Lamp Beads Chip Bulb 200lm 10000K Cold White, 25 Pcs

COB LED Chip 1W 5V LED Lamp Beads Chip Bulb 200lm 10000K Cold White, 25 Pcs

ID:
£9.00 Regular price
/
Wholesale Price
35%OFF
Order $5000+
  • 35%OFF
    Order $5000+
  • 25%OFF
    Order $2000+
  • 15%OFF
    Order $800+
  • 10%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • Specification: Light Color: Cold White, Output Power: 1W, Input Voltage: 5VDC, Luminous Flux: 200lm, Color Temperature: 10000K, Light Color: Cold White, Outer Diameter: 20mm / 0.79 inch (OD), Material: Aluminum, Plastic, Package Content: 25Pcs x LED Chips.
  • Advantage: It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light.
  • Instruction:1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout. 2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads. 3. The LED light source board cannot connect directly to 220V.
  • NOTE: The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.
  • Application: The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.
  • In stock, ready to ship
Cart
Cart
About this item
  • Specification: Light Color: Cold White, Output Power: 1W, Input Voltage: 5VDC, Luminous Flux: 200lm, Color Temperature: 10000K, Light Color: Cold White, Outer Diameter: 20mm / 0.79 inch (OD), Material: Aluminum, Plastic, Package Content: 25Pcs x LED Chips.
  • Advantage: It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light.
  • Instruction:1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout. 2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads. 3. The LED light source board cannot connect directly to 220V.
  • NOTE: The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.
  • Application: The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.

Specification
Light Color: Cold White
Output Power: 1W
Input Voltage: 5VDC
Luminous Flux: 200lm
Color Temperature: 10000K
Outer Diameter: 20mm / 0.79 inch (OD)
Material: Aluminum, Plastic
Package: 25Pcs x LED Chips

Advantage
It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light

Instruction
1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout.
2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads.
3. The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.

NOTE
Please pay attention to the specifications and parameters of the COB LED lights
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
£9.00 Regular price
/
Wholesale Price
35%OFF
Order $5000+
  • 35%OFF
    Order $5000+
  • 25%OFF
    Order $2000+
  • 15%OFF
    Order $800+
  • 10%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.

Specification
Light Color: Cold White
Output Power: 1W
Input Voltage: 5VDC
Luminous Flux: 200lm
Color Temperature: 10000K
Outer Diameter: 20mm / 0.79 inch (OD)
Material: Aluminum, Plastic
Package: 25Pcs x LED Chips

Advantage
It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light

Instruction
1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout.
2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads.
3. The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.

NOTE
Please pay attention to the specifications and parameters of the COB LED lights
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'GB').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)