Home Automobiles & MotorcyclesWheel & Tire Accessories & PartsLug Nuts
Harfington Front Control Arms Cam Bolt for Dodge for Ram 1500 2500 3500 2003-2009 8.8 Grade

Front Control Arms Cam Bolt for Dodge for Ram 1500 2500 3500 2003-2009 8.8 Grade

ID:
€59,89 Regular price
/
About this item
  • [Fitment] This Front Control Arm Camber Adjust Bolt Repair Kit is suit for Dodge for Ram 1500 (1/2 Ton) 2002-2008 4x4 Models, for Dodge for Ram 2500 (3/4 Ton) 2003-2009, for Dodge for Ram 3500 (1 Ton) 2003-2009. It OONLY work on the Solid Axles for Ram 1500 Models, Not for Ram 1500 2002-Present with an Independent Front Suspension.
  • [Function] This Front Control Arm Camber Bolt Set include all bolts and nuts for control arms mounting kits on front lower front ends/front lower rear ends/front upper both ends. A damaged camber adjustment bolt may cause issue like Poor Handling & Steering Instability, Incorrect Camber Angle, Rapid & Uneven Tire Wear, Suspension Noise (Clunking, Popping), Risk of Bolt Failure & Loss of Control etc.
  • [Reliable Quality] This Bolt Kit is Installed at the Front, Upper, and Lower. This Front Camber Adjustment Bolt adopt with study alloy steel, waterproof and corrosion resistance, high temperature Resistance, aim for long time service. The water may enter through the side of the bolt and causing it rusted (due to the design of the factory's front cam bolts), please replace the bolts sets in time.
  • [Installation]1.Engage parking brake and chock rear wheels, loose lug nuts on affected wheel, jack up and stand the front end, remove wheel. 2.Locate the camber bolt (where the arm attaches to the subframe), mark the bolt's install position, remove the damaged bolts. 3.Insert new bolt in the same orientation as the old one (eccentric washer aligned properly), tighten the nut to the correct torque spec. 4.Install wheel, lower the car and torque lug nut properly. 5.Get a Wheel Alignment.
  • [Package] Include 2 x Grade 8.8 Cam Bolts, 2 x Eccentric Cam Washers, 6 x Grade 8.8 Mounting Bolts, 6 x Flat Washers, 8 x Steel Top Lock Nuts. Please note A new camber bolt changes alignment, so an wheel alignment is very necessary.
  • In stock, ready to ship
Cart
Cart
About this item
  • [Fitment] This Front Control Arm Camber Adjust Bolt Repair Kit is suit for Dodge for Ram 1500 (1/2 Ton) 2002-2008 4x4 Models, for Dodge for Ram 2500 (3/4 Ton) 2003-2009, for Dodge for Ram 3500 (1 Ton) 2003-2009. It OONLY work on the Solid Axles for Ram 1500 Models, Not for Ram 1500 2002-Present with an Independent Front Suspension.
  • [Function] This Front Control Arm Camber Bolt Set include all bolts and nuts for control arms mounting kits on front lower front ends/front lower rear ends/front upper both ends. A damaged camber adjustment bolt may cause issue like Poor Handling & Steering Instability, Incorrect Camber Angle, Rapid & Uneven Tire Wear, Suspension Noise (Clunking, Popping), Risk of Bolt Failure & Loss of Control etc.
  • [Reliable Quality] This Bolt Kit is Installed at the Front, Upper, and Lower. This Front Camber Adjustment Bolt adopt with study alloy steel, waterproof and corrosion resistance, high temperature Resistance, aim for long time service. The water may enter through the side of the bolt and causing it rusted (due to the design of the factory's front cam bolts), please replace the bolts sets in time.
  • [Installation]1.Engage parking brake and chock rear wheels, loose lug nuts on affected wheel, jack up and stand the front end, remove wheel. 2.Locate the camber bolt (where the arm attaches to the subframe), mark the bolt's install position, remove the damaged bolts. 3.Insert new bolt in the same orientation as the old one (eccentric washer aligned properly), tighten the nut to the correct torque spec. 4.Install wheel, lower the car and torque lug nut properly. 5.Get a Wheel Alignment.
  • [Package] Include 2 x Grade 8.8 Cam Bolts, 2 x Eccentric Cam Washers, 6 x Grade 8.8 Mounting Bolts, 6 x Flat Washers, 8 x Steel Top Lock Nuts. Please note A new camber bolt changes alignment, so an wheel alignment is very necessary.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Fitment of Front Control Arm Camber Bolt
  • for Dodge for Ram 1500 (1/2 Ton) 2002-2008 4x4 Models
  • for Dodge for Ram 2500 (3/4 Ton) 2003-2009
  • for Dodge for Ram 3500 (1 Ton) 2003-2009
  • Only Work on the Solid Axles for Ram 1500 Model
  • Not for Ram 1500 2002-Present with an Independent Front Suspension
Specifications of Front Camber Adjustment Bolt
  • Material: Steel
  • Placement on Vehicle: Front, Upper, Lower
  • This is a non-OEM product, accessory only!
Package
  • 2 x Grade 8.8 Cam Bolts, 2 x Eccentric Cam Washers
  • 6 x Grade 8.8 Mounting Bolts, 6 x Flat Washers, 8 x Steel Top Lock Nuts
Features
  • Include all bolts and nuts for control arms mounting kits on front lower front ends/front lower rear ends/front upper both ends.
  • This Front Camber Adjustment Bolt adopt with study alloy steel, waterproof and corrosion resistance, high temperature Resistance, aim for long time service.
  • The water may enter through the side of the bolt and causing it rusted (due to the design of the factory's front cam bolts)
What will Happen if the Camber Bolt Damaged?
  • Poor Handling & Steering Instability
  • Incorrect Camber Angle
  • Rapid & Uneven Tire Wear
  • Suspension Noise (Clunking, Popping)
  • Risk of Bolt Failure & Loss of Control etc.
Installation
  • 1.Engage parking brake and chock rear wheels, loose lug nuts on affected wheel, jack up and stand the front end, remove wheel.
  • 2.Locate the camber bolt (where the arm attaches to the subframe), mark the bolt's install position, remove the damaged bolts.
  • 3.Insert new bolt in the same orientation as the old one (eccentric washer aligned properly), tighten the nut to the correct torque spec.
  • 4.Install wheel, lower the car and torque lug nut properly.
  • 5.Get a Wheel Alignment.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€59,89 Regular price
/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Fitment of Front Control Arm Camber Bolt
  • for Dodge for Ram 1500 (1/2 Ton) 2002-2008 4x4 Models
  • for Dodge for Ram 2500 (3/4 Ton) 2003-2009
  • for Dodge for Ram 3500 (1 Ton) 2003-2009
  • Only Work on the Solid Axles for Ram 1500 Model
  • Not for Ram 1500 2002-Present with an Independent Front Suspension
Specifications of Front Camber Adjustment Bolt
  • Material: Steel
  • Placement on Vehicle: Front, Upper, Lower
  • This is a non-OEM product, accessory only!
Package
  • 2 x Grade 8.8 Cam Bolts, 2 x Eccentric Cam Washers
  • 6 x Grade 8.8 Mounting Bolts, 6 x Flat Washers, 8 x Steel Top Lock Nuts
Features
  • Include all bolts and nuts for control arms mounting kits on front lower front ends/front lower rear ends/front upper both ends.
  • This Front Camber Adjustment Bolt adopt with study alloy steel, waterproof and corrosion resistance, high temperature Resistance, aim for long time service.
  • The water may enter through the side of the bolt and causing it rusted (due to the design of the factory's front cam bolts)
What will Happen if the Camber Bolt Damaged?
  • Poor Handling & Steering Instability
  • Incorrect Camber Angle
  • Rapid & Uneven Tire Wear
  • Suspension Noise (Clunking, Popping)
  • Risk of Bolt Failure & Loss of Control etc.
Installation
  • 1.Engage parking brake and chock rear wheels, loose lug nuts on affected wheel, jack up and stand the front end, remove wheel.
  • 2.Locate the camber bolt (where the arm attaches to the subframe), mark the bolt's install position, remove the damaged bolts.
  • 3.Insert new bolt in the same orientation as the old one (eccentric washer aligned properly), tighten the nut to the correct torque spec.
  • 4.Install wheel, lower the car and torque lug nut properly.
  • 5.Get a Wheel Alignment.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)