Home Pipe, Tubing, Hose & FittingsPipe FittingsConnectorsBrass Quick Connect Disconnect Sets
Harfington 20Pcs 4 Sizes Internal Hex Brass Pipe Plug Fitting Set with PTFE Tape

20Pcs 4 Sizes Internal Hex Brass Pipe Plug Fitting Set with PTFE Tape

ID:
€17,76 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • The brass pipe plug fitting is used to prevent leakage of air, gas, water, oil, steam, and fluids under pressure. Great for blocking off water pump ports, engine block holes, intake manifold water ports, water temperature and oil sensor holes, etc. Can be used with brass, copper, steel, aluminum, and iron pipes.
  • Specification: Material: Brass; Thread Size 1: 1/8"NPT Male Thread; Thread Size 2: 1/4"NPT Male Thread; Thread Size 3: 3/8"NPT Male Thread; Thread Size 4: 1/2"NPT Male Thread; Max Operating Pressure: 150PSI; Work Temperature Range: -65 to 250 F Degree; Package List: 20Pcs x Brass Pipe Plug Fitting (Each Size 5Pcs), 1PCS x PTFE Tape
  • Advantage: Made of good quality brass material, the brass pipe plug fitting is corrosion resistant, has ductility at high temperatures, has low magnetic permeability, has high hardness, and is durable. After precision grinding, the thread design is deeper and tighter, and it is not easy to slip during installation, supplying reliable sealing effectively prevents liquid or gas leakage.
  • Instruction:Internal hexagon design for easy removal and installation. Screw the brass pipe plug fitting into the threaded pipe and tighten it with a wrench. We suggest using PTFE tape with the NPT thread fittings for a better seal.
  • NOTE: Please check the thread size carefully before purchasing. Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
  • In stock, ready to ship
Cart
Cart
About this item
  • The brass pipe plug fitting is used to prevent leakage of air, gas, water, oil, steam, and fluids under pressure. Great for blocking off water pump ports, engine block holes, intake manifold water ports, water temperature and oil sensor holes, etc. Can be used with brass, copper, steel, aluminum, and iron pipes.
  • Specification: Material: Brass; Thread Size 1: 1/8"NPT Male Thread; Thread Size 2: 1/4"NPT Male Thread; Thread Size 3: 3/8"NPT Male Thread; Thread Size 4: 1/2"NPT Male Thread; Max Operating Pressure: 150PSI; Work Temperature Range: -65 to 250 F Degree; Package List: 20Pcs x Brass Pipe Plug Fitting (Each Size 5Pcs), 1PCS x PTFE Tape
  • Advantage: Made of good quality brass material, the brass pipe plug fitting is corrosion resistant, has ductility at high temperatures, has low magnetic permeability, has high hardness, and is durable. After precision grinding, the thread design is deeper and tighter, and it is not easy to slip during installation, supplying reliable sealing effectively prevents liquid or gas leakage.
  • Instruction:Internal hexagon design for easy removal and installation. Screw the brass pipe plug fitting into the threaded pipe and tighten it with a wrench. We suggest using PTFE tape with the NPT thread fittings for a better seal.
  • NOTE: Please check the thread size carefully before purchasing. Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
The brass pipe plug fitting is used to prevent leakage of air, gas, water, oil, steam, and fluids under pressure. Great for blocking off water pump ports, engine block holes, intake manifold water ports, water temperature and oil sensor holes, etc. Can be used with brass, copper, steel, aluminum, and iron pipes.

Specification
Material: Brass
Color: Brass Tone
Size 1: Thread Size: 1/8"NPT Male Thread; Outer Diameter: 10.16mm (0.4"); Total Size: 8.64 x 5mm/ 0.34 x 0.2inch (L x Hex Width)
Size 2: Thread Size: 1/4"NPT Male Thread; Outer Diameter: 13.2mm (0.52"); Total Size: 10.16 x 6mm/ 0.4 x 0.24inch
Size 3: Thread Size: 3/8"NPT Male Thread; Outer Diameter: 16.76mm (0.66"); Total Size: 10.92 x 8mm/ 0.43 x 0.31inch
Size 4: Thread Size: 1/2"NPT Male Thread; Outer Diameter: 20.83mm (0.82"); Total Size: 12 x 12.5mm/ 0.47 x 0.49inch
Max Operating Pressure: 150PSI
Work Temperature Range: -65 to 250 F Degree
Package List: 20Pcs x Brass Pipe Plug Fitting (Each Size 5Pcs), 1PCS x PTFE Tape

Advantage
Made of good quality brass material, the brass pipe plug fitting is corrosion resistant, has ductility at high temperatures, has low magnetic permeability, has high hardness, and is durable. After precision grinding, the thread design is deeper and tighter, and it is not easy to slip during installation, supplying reliable sealing effectively prevents liquid or gas leakage.

Instruction
Internal hexagon design for easy removal and installation. Screw the brass pipe plug fitting into the threaded pipe and tighten it with a wrench. We suggest using PTFE tape with the NPT thread fittings for a better seal.

NOTE: Please check the thread size carefully before purchasing. Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€17,76 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

The brass pipe plug fitting is used to prevent leakage of air, gas, water, oil, steam, and fluids under pressure. Great for blocking off water pump ports, engine block holes, intake manifold water ports, water temperature and oil sensor holes, etc. Can be used with brass, copper, steel, aluminum, and iron pipes.

Specification
Material: Brass
Color: Brass Tone
Size 1: Thread Size: 1/8"NPT Male Thread; Outer Diameter: 10.16mm (0.4"); Total Size: 8.64 x 5mm/ 0.34 x 0.2inch (L x Hex Width)
Size 2: Thread Size: 1/4"NPT Male Thread; Outer Diameter: 13.2mm (0.52"); Total Size: 10.16 x 6mm/ 0.4 x 0.24inch
Size 3: Thread Size: 3/8"NPT Male Thread; Outer Diameter: 16.76mm (0.66"); Total Size: 10.92 x 8mm/ 0.43 x 0.31inch
Size 4: Thread Size: 1/2"NPT Male Thread; Outer Diameter: 20.83mm (0.82"); Total Size: 12 x 12.5mm/ 0.47 x 0.49inch
Max Operating Pressure: 150PSI
Work Temperature Range: -65 to 250 F Degree
Package List: 20Pcs x Brass Pipe Plug Fitting (Each Size 5Pcs), 1PCS x PTFE Tape

Advantage
Made of good quality brass material, the brass pipe plug fitting is corrosion resistant, has ductility at high temperatures, has low magnetic permeability, has high hardness, and is durable. After precision grinding, the thread design is deeper and tighter, and it is not easy to slip during installation, supplying reliable sealing effectively prevents liquid or gas leakage.

Instruction
Internal hexagon design for easy removal and installation. Screw the brass pipe plug fitting into the threaded pipe and tighten it with a wrench. We suggest using PTFE tape with the NPT thread fittings for a better seal.

NOTE: Please check the thread size carefully before purchasing. Be careful not to over-tighten the tube fittings, as this can cause damage or leaks.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)