Home FabricatingMachiningTapsTaps
Harfington 14pcs Spiral Point Tap Set M2 M2.5 M3 M3.5 M4 M5 M6 Metric Ti-Coated Thread Taps

14pcs Spiral Point Tap Set M2 M2.5 M3 M3.5 M4 M5 M6 Metric Ti-Coated Thread Taps

ID:
€25,63 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • Metric Spiral Point Taps: Thread size: M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6, M4 x 0.7, M5 x 0.8, M6 x 1.0; plug chamfer and right hand thread cutting. Straight flutes are ground to provide downward chip removal, with clear threads and sharp cutting edges.
  • Material & Finish: 6542 (M2) high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
  • Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
  • Machine Tap: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
  • Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Drill the holes with a twist drill bit first, then tap with a thread tap. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
  • In stock, ready to ship
Cart
Cart
About this item
  • Metric Spiral Point Taps: Thread size: M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6, M4 x 0.7, M5 x 0.8, M6 x 1.0; plug chamfer and right hand thread cutting. Straight flutes are ground to provide downward chip removal, with clear threads and sharp cutting edges.
  • Material & Finish: 6542 (M2) high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
  • Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
  • Machine Tap: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
  • Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Drill the holes with a twist drill bit first, then tap with a thread tap. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:

Thread Size: M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6, M4 x 0.7, M5 x 0.8, M6 x 1.0
Square Shank Width: 2.3mm / 0.09", 2.3mm / 0.09", 3.1mm / 0.12", 3.1mm / 0.12", 3.86mm / 0.15", 3.95mm / 0.16", 4.6mm / 0.18"
Thread Length: 9mm / 0.35", 11.5mm / 0.45", 14mm / 0.55", 15mm / 0.6", 15mm / 0.6", 18.5mm / 0.73", 22mm / 0.87"
Total Length: 43mm / 1.69", 47mm / 1.85", 50mm / 1.97", 56mm / 2.2", 56mm / 2.2", 62mm / 2.44", 67.5mm / 2.66"
Material: HSS 6542 (High Speed Steel 6542)
Finish: Titanium Coated
1 Set (2pcs x 7 sizes) x Spiral Point Tap

Descriptions:
1. Metric thread tap features spiral point, plug chamfer and right hand thread cutting. Straight flutes are ground to provide downward chip removal. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
2. High-speed steel tapping tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
3. Spiral point tap is suitable for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, and hard plastics. Flutes help to remove chips and debris from the hole.
4. Machine threading tap is used with drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter of screw tap.
5. Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€25,63 Regular price
/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Thread Size: M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6, M4 x 0.7, M5 x 0.8, M6 x 1.0
Square Shank Width: 2.3mm / 0.09", 2.3mm / 0.09", 3.1mm / 0.12", 3.1mm / 0.12", 3.86mm / 0.15", 3.95mm / 0.16", 4.6mm / 0.18"
Thread Length: 9mm / 0.35", 11.5mm / 0.45", 14mm / 0.55", 15mm / 0.6", 15mm / 0.6", 18.5mm / 0.73", 22mm / 0.87"
Total Length: 43mm / 1.69", 47mm / 1.85", 50mm / 1.97", 56mm / 2.2", 56mm / 2.2", 62mm / 2.44", 67.5mm / 2.66"
Material: HSS 6542 (High Speed Steel 6542)
Finish: Titanium Coated
1 Set (2pcs x 7 sizes) x Spiral Point Tap

Descriptions:
1. Metric thread tap features spiral point, plug chamfer and right hand thread cutting. Straight flutes are ground to provide downward chip removal. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
2. High-speed steel tapping tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
3. Spiral point tap is suitable for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, and hard plastics. Flutes help to remove chips and debris from the hole.
4. Machine threading tap is used with drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter of screw tap.
5. Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)