Home Power TransmissionPneumaticsPneumatic Solenoid Valve
Harfington 1/2 Inch Flare x 1/2 Inch Flare SAE Gas Valve Forged Brass One-way Hand Valve

1/2 Inch Flare x 1/2 Inch Flare SAE Gas Valve Forged Brass One-way Hand Valve

ID:
CA$36.00 Regular price
CA/
Wholesale Price
20%OFF
Order $5000+
  • 25%OFF
    Order $5000+
  • 20%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • Specification: Inner Diameter: 12.7 mm / 1/2", Thread Size: 1/2" SAE, Thread Length: 11 mm / 0.43", Total Length: 94 mm / 3.7", Total Height: 85 mm / 3.35", Hole Center Distance: 41.3 mm / 1.63". (Tips: Manual measurement may have certain errors.)
  • Advantage: The flare gas valve uses high purity brass material as the raw material for the valve body, which is processed through precision forging technology and has excellent thermal conductivity and corrosion resistance. Combined with the dense structure brought by forging technology, the valve body has good strength and hardness. The valve core is made of modified nylon king special engineering plastic, which has excellent sealing performance, excellent wear resistance.
  • Instruction: Turning the handwheel clockwise closes the valve, while turning it counterclockwise opens the valve; The fully open or fully closed state only requires one and a half turns. During operation, the handwheel rotation angle can be adjusted according to the system flow requirements to control the valve opening.
  • Application: This flare valve is designed to be used in refrigeration systems, it acts as a shut-off point for the system, allows you to control the refrigerant or water flow easily, and saving time and effort during installation, troubleshooting, or routine maintenance tasks. Suitable for various commercial cold storage, industrial cold storage, low-temperature experimental chamber, freeze-drying equipment, etc.
  • Note: Please do not use under working conditions exceeding the rated working pressure of the product (4.5MPa) or unsuitable media.
  • In stock, ready to ship
Cart
Cart
About this item
  • Specification: Inner Diameter: 12.7 mm / 1/2", Thread Size: 1/2" SAE, Thread Length: 11 mm / 0.43", Total Length: 94 mm / 3.7", Total Height: 85 mm / 3.35", Hole Center Distance: 41.3 mm / 1.63". (Tips: Manual measurement may have certain errors.)
  • Advantage: The flare gas valve uses high purity brass material as the raw material for the valve body, which is processed through precision forging technology and has excellent thermal conductivity and corrosion resistance. Combined with the dense structure brought by forging technology, the valve body has good strength and hardness. The valve core is made of modified nylon king special engineering plastic, which has excellent sealing performance, excellent wear resistance.
  • Instruction: Turning the handwheel clockwise closes the valve, while turning it counterclockwise opens the valve; The fully open or fully closed state only requires one and a half turns. During operation, the handwheel rotation angle can be adjusted according to the system flow requirements to control the valve opening.
  • Application: This flare valve is designed to be used in refrigeration systems, it acts as a shut-off point for the system, allows you to control the refrigerant or water flow easily, and saving time and effort during installation, troubleshooting, or routine maintenance tasks. Suitable for various commercial cold storage, industrial cold storage, low-temperature experimental chamber, freeze-drying equipment, etc.
  • Note: Please do not use under working conditions exceeding the rated working pressure of the product (4.5MPa) or unsuitable media.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
This flare valve is designed to be used in refrigeration systems, it acts as a shut-off point for the system, allows you to control the refrigerant or water flow easily, and saving time and effort during installation, troubleshooting, or routine maintenance tasks. Suitable for various commercial cold storage, industrial cold storage, low-temperature experimental chamber, freeze-drying equipment, etc.

Specification
Inner Diameter: 12.7mm / 1/2"
Thread Size: 1/2" SAE
Thread Length: 11mm / 0.43"
Total Length: 94mm / 3.7"
Total Height: 85mm / 3.35"
Mounting Hole Diameter: 6mm / 0.24"
Hole Center Distance: 41.3mm / 1.63"
Package List: 1 Pcs x  Hand Valve

Advantage
The flare gas valve uses high purity brass material as the raw material for the valve body, which is processed through precision forging technology and has excellent thermal conductivity and corrosion resistance. Combined with the dense structure brought by forging technology, the valve body has good strength and hardness.
The valve core is made of modified nylon king special engineering plastic, which has excellent sealing performance, excellent wear resistance, and outstanding high temperature resistance.
The handle valve is one kind of manual stop valve and applicable to one-way flow, it can be used for the refrigerant pipes of refrigeration and air conditioning units, heating equipment etc.

Instruction
Turning the handwheel clockwise to close the valve, while turning it counterclockwise to open the valve; The fully open or fully closed state only requires one and a half turns. Adjust handwheel angle as needed to control flow and valve opening during use.

Note
Please do not use under working conditions exceeding the rated working pressure of the product (4.5MPa) or unsuitable media.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
CA$36.00 Regular price
CA/
Wholesale Price
20%OFF
Order $5000+
  • 25%OFF
    Order $5000+
  • 20%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

This flare valve is designed to be used in refrigeration systems, it acts as a shut-off point for the system, allows you to control the refrigerant or water flow easily, and saving time and effort during installation, troubleshooting, or routine maintenance tasks. Suitable for various commercial cold storage, industrial cold storage, low-temperature experimental chamber, freeze-drying equipment, etc.

Specification
Inner Diameter: 12.7mm / 1/2"
Thread Size: 1/2" SAE
Thread Length: 11mm / 0.43"
Total Length: 94mm / 3.7"
Total Height: 85mm / 3.35"
Mounting Hole Diameter: 6mm / 0.24"
Hole Center Distance: 41.3mm / 1.63"
Package List: 1 Pcs x  Hand Valve

Advantage
The flare gas valve uses high purity brass material as the raw material for the valve body, which is processed through precision forging technology and has excellent thermal conductivity and corrosion resistance. Combined with the dense structure brought by forging technology, the valve body has good strength and hardness.
The valve core is made of modified nylon king special engineering plastic, which has excellent sealing performance, excellent wear resistance, and outstanding high temperature resistance.
The handle valve is one kind of manual stop valve and applicable to one-way flow, it can be used for the refrigerant pipes of refrigeration and air conditioning units, heating equipment etc.

Instruction
Turning the handwheel clockwise to close the valve, while turning it counterclockwise to open the valve; The fully open or fully closed state only requires one and a half turns. Adjust handwheel angle as needed to control flow and valve opening during use.

Note
Please do not use under working conditions exceeding the rated working pressure of the product (4.5MPa) or unsuitable media.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'CA').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)