Home Automobiles & MotorcyclesReplacement PartsEngines & Engine PartsIgnition Wire Set
Harfington 671-4079 Car Spark Plug Cable Ignition Wire Set of 4 for Chrysler PT Cruiser new

671-4079 Car Spark Plug Cable Ignition Wire Set of 4 for Chrysler PT Cruiser new

ID:
CA$35.00 Regular price
CA/
About this item
  • Product Name: Ignition Wire; Material: Silicone, Metal; Package Content: 4 x Ignition Wire; Manufacturer Part Number: 671-4079; Wire Diameter: 7mm/ 0.27 inches
  • Identical in form, fit, color and performance to the factory-installed wire sets.
  • Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.
  • Pre-cut wire to exact length with reinforcing member for added strength and terminal retention.
  • Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression.
  • In stock, ready to ship
Cart
Cart
About this item
  • Product Name: Ignition Wire; Material: Silicone, Metal; Package Content: 4 x Ignition Wire; Manufacturer Part Number: 671-4079; Wire Diameter: 7mm/ 0.27 inches
  • Identical in form, fit, color and performance to the factory-installed wire sets.
  • Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.
  • Pre-cut wire to exact length with reinforcing member for added strength and terminal retention.
  • Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:

For Chrysler PT Cruiser 2010 Classic Wagon 4-Door

For Chrysler PT Cruiser 2010 Couture Edition Wagon 4-Door

For Chrysler PT Cruiser 2009/ 2008/ 2006/ 2004/ 2003/ 2002/ 2001 Base Wagon 4-Door

For Chrysler PT Cruiser 2009/ 2008  LX Wagon 4-Door 

For Chrysler PT Cruiser 2009/ 2008/ 2006/ 2005/ 2004/ 2003/ 2002/ 2001 Touring Wagon 4-Door

For Chrysler PT Cruiser 2008/ 2005Touring Convertible 2-Door for Chrysler PT Cruiser Touring Convertible 2-Door

For Chrysler PT Cruiser 2006/ 2005/ 2004/ 2003/ 2002/ 2001 Limited Wagon 4-Door

For Dodge Caravan 2007/ 2006/ 2005/ 2004/ 2003/ 2002/ 2001 SE for Passenger 4-Door

For Chrysler PT Cruiser 2006/ 2005 Street Cruiser Wagon 4-Door

For Chrysler Sebring 2006/ 2005/ 2004/ Base Convertible 2-Door

For Chrysler Sebring 2006/ 2005/ 2004/ Base Sedan 4-Door

For Dodge Stratus 2006/ 2005/ 2004/ 2003/ 2002/ 2001 SE Sedan 4-Door

For Dodge Stratus 2006/  2004/ SXT Sedan 4-Door

For Chrysler PT Cruiser 2005 Dream Cruiser Wagon 4-Door

For Chrysler PT Cruiser 2005 GT Convertible 2-Door

This is Non-OEM product, accessory only!

Replacement procedure. (Take "2005 PT Cruiser 2.4L" as an example)

Step : Remove the six 8mm upper manifold retaining bolts.

Step :Loosen the air intake clamp at the throttle body.

Step :Lift the upper intake manifold and retain out of the way using a cord.

Step :Remove old plug wire.

Step :Using cotton swab, apply a very small amount of dielectric grease to the boot interior at each end (just the boot - not the terminal).Step 

:Reinstall new plug wire.Step :Repeat for each cylinder until done.

Step :Lower intake manifold back in place and tighten to spec from interior bolts to the outside (no new gaskets required).

Step :Tighten clamp at air intake to throttle body.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
CA$35.00 Regular price
CA/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

For Chrysler PT Cruiser 2010 Classic Wagon 4-Door

For Chrysler PT Cruiser 2010 Couture Edition Wagon 4-Door

For Chrysler PT Cruiser 2009/ 2008/ 2006/ 2004/ 2003/ 2002/ 2001 Base Wagon 4-Door

For Chrysler PT Cruiser 2009/ 2008  LX Wagon 4-Door 

For Chrysler PT Cruiser 2009/ 2008/ 2006/ 2005/ 2004/ 2003/ 2002/ 2001 Touring Wagon 4-Door

For Chrysler PT Cruiser 2008/ 2005Touring Convertible 2-Door for Chrysler PT Cruiser Touring Convertible 2-Door

For Chrysler PT Cruiser 2006/ 2005/ 2004/ 2003/ 2002/ 2001 Limited Wagon 4-Door

For Dodge Caravan 2007/ 2006/ 2005/ 2004/ 2003/ 2002/ 2001 SE for Passenger 4-Door

For Chrysler PT Cruiser 2006/ 2005 Street Cruiser Wagon 4-Door

For Chrysler Sebring 2006/ 2005/ 2004/ Base Convertible 2-Door

For Chrysler Sebring 2006/ 2005/ 2004/ Base Sedan 4-Door

For Dodge Stratus 2006/ 2005/ 2004/ 2003/ 2002/ 2001 SE Sedan 4-Door

For Dodge Stratus 2006/  2004/ SXT Sedan 4-Door

For Chrysler PT Cruiser 2005 Dream Cruiser Wagon 4-Door

For Chrysler PT Cruiser 2005 GT Convertible 2-Door

This is Non-OEM product, accessory only!

Replacement procedure. (Take "2005 PT Cruiser 2.4L" as an example)

Step : Remove the six 8mm upper manifold retaining bolts.

Step :Loosen the air intake clamp at the throttle body.

Step :Lift the upper intake manifold and retain out of the way using a cord.

Step :Remove old plug wire.

Step :Using cotton swab, apply a very small amount of dielectric grease to the boot interior at each end (just the boot - not the terminal).Step 

:Reinstall new plug wire.Step :Repeat for each cylinder until done.

Step :Lower intake manifold back in place and tighten to spec from interior bolts to the outside (no new gaskets required).

Step :Tighten clamp at air intake to throttle body.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'CA').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)