Home Automobiles & MotorcyclesReplacement PartsBody & TrimPower Door Locks
Harfington Bell Crank Tailgate for Kia Sedona 2010-2014 3.5L 3.8L W/O Power Lift 812904D700

Bell Crank Tailgate for Kia Sedona 2010-2014 3.5L 3.8L W/O Power Lift 812904D700

ID:
CA$87.00 Regular price
CA/
About this item
  • [Fitment] This Tail Gate Bell Crank Assembly for Kia Sedona EX LX 2010-2013 3.5L, for Kia Sedona EX LX Base 2014 3.8L, Without power liftgate. OE Number:812904D700/81290-4D700.
  • [Function] 5 Pin. The bell crank change the direction of an applied force and transfer motion. It is used in two main scenarios: controlling the smooth opening/closing of the tailgate or actuating the tailgate latch mechanism.
  • [Reliable Quality] This tailgate bell crank adopt with sturdy plastic and high density metal, aim to provide robust latch a long last life, wear-resistant, corrosion-resistant and anti deform.
  • [Installation] 1. Remove Interior Trim Panel. 2. Access the Bell Crank, make a sketch of how all rods, cables, and springs are connected. 3. Replace the Bell Crank, Disconnect Linkage and Remove Old bell crank from its mounting point. 4. Install New bell crank, reconnect all linkage rods to correct positions. 5. Test and Reassemble, erify smooth and reliable latching/unlatching before recover door panel.
  • [Package] Include 1x Tailgate Bell Crank Assembly. Please check and replace it if met issue like Stiff or Stuck Operation of Tailgate handle, Tailgate won't latch shut, won't unlock/open, drops rapidly/free-falls upon release, Unusual Noises from inside the tailgate during operation or over bumps, Visible Damage.
  • In stock, ready to ship
Cart
Cart
About this item
  • [Fitment] This Tail Gate Bell Crank Assembly for Kia Sedona EX LX 2010-2013 3.5L, for Kia Sedona EX LX Base 2014 3.8L, Without power liftgate. OE Number:812904D700/81290-4D700.
  • [Function] 5 Pin. The bell crank change the direction of an applied force and transfer motion. It is used in two main scenarios: controlling the smooth opening/closing of the tailgate or actuating the tailgate latch mechanism.
  • [Reliable Quality] This tailgate bell crank adopt with sturdy plastic and high density metal, aim to provide robust latch a long last life, wear-resistant, corrosion-resistant and anti deform.
  • [Installation] 1. Remove Interior Trim Panel. 2. Access the Bell Crank, make a sketch of how all rods, cables, and springs are connected. 3. Replace the Bell Crank, Disconnect Linkage and Remove Old bell crank from its mounting point. 4. Install New bell crank, reconnect all linkage rods to correct positions. 5. Test and Reassemble, erify smooth and reliable latching/unlatching before recover door panel.
  • [Package] Include 1x Tailgate Bell Crank Assembly. Please check and replace it if met issue like Stiff or Stuck Operation of Tailgate handle, Tailgate won't latch shut, won't unlock/open, drops rapidly/free-falls upon release, Unusual Noises from inside the tailgate during operation or over bumps, Visible Damage.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
OE Number:
  • 812904D700/81290-4D700
Fitment
  • for Kia Sedona EX LX 2010-2013 3.5L
  • for Kia Sedona EX LX Base 2014 3.8L
  • Without power liftgate
Specifications
  • Type: Bell Crank
  • Material: Metal, Plastic
  • Package: 1x Tailgate Bell Crank Assembly
  • This is a non-OEM product, accessory only!
Features
  • It is use to change the direction of an applied force and transfer motion. It is used in two main scenarios: controlling the smooth opening/closing of the tailgate or actuating the tailgate latch mechanism.
  • Adopt with sturdy plastic and high density metal, aim to provide robust latch a long last life, wear-resistant, corrosion-resistant and anti deform.
Signs of Fail Bell Crank
  • Stiff or Stuck Operation of tailgate handle
  • Tailgate won't latch shut, won't unlock/open, drops rapidly/free-falls upon release
  • Unusual Noises from inside the tailgate during operation or over bumps
  • Visible Damage like severe rust, deformed rods
Installation
  • 1. Remove Interior Trim Panel.
  • 2. Access the Bell Crank, make a sketch of how all rods, cables, and springs are connected.
  • 3. Replace the Bell Crank, Disconnect Linkage and Remove Old bell crank from its mounting point.
  • 4. Install New bell crank, reconnect all linkage rods to correct positions.
  • 5. Test and Reassemble, erify smooth and reliable latching/unlatching before recover door panel.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
CA$87.00 Regular price
CA/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

OE Number:
  • 812904D700/81290-4D700
Fitment
  • for Kia Sedona EX LX 2010-2013 3.5L
  • for Kia Sedona EX LX Base 2014 3.8L
  • Without power liftgate
Specifications
  • Type: Bell Crank
  • Material: Metal, Plastic
  • Package: 1x Tailgate Bell Crank Assembly
  • This is a non-OEM product, accessory only!
Features
  • It is use to change the direction of an applied force and transfer motion. It is used in two main scenarios: controlling the smooth opening/closing of the tailgate or actuating the tailgate latch mechanism.
  • Adopt with sturdy plastic and high density metal, aim to provide robust latch a long last life, wear-resistant, corrosion-resistant and anti deform.
Signs of Fail Bell Crank
  • Stiff or Stuck Operation of tailgate handle
  • Tailgate won't latch shut, won't unlock/open, drops rapidly/free-falls upon release
  • Unusual Noises from inside the tailgate during operation or over bumps
  • Visible Damage like severe rust, deformed rods
Installation
  • 1. Remove Interior Trim Panel.
  • 2. Access the Bell Crank, make a sketch of how all rods, cables, and springs are connected.
  • 3. Replace the Bell Crank, Disconnect Linkage and Remove Old bell crank from its mounting point.
  • 4. Install New bell crank, reconnect all linkage rods to correct positions.
  • 5. Test and Reassemble, erify smooth and reliable latching/unlatching before recover door panel.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'CA').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)