Home Fastening & JoiningSealingO-RingsNitrile Rubber O-Rings
Harfington 2pcs 5-5mm L20xD12 Aluminum Alloy Rigid Shaft Couplings, 5pcs 250x5mm Stainless Steel Solid Round Rods, 12pcs 9x5x2mm Nitrile Rubber O-Rings

2pcs 5-5mm L20xD12 Aluminum Alloy Rigid Shaft Couplings, 5pcs 250x5mm Stainless Steel Solid Round Rods, 12pcs 9x5x2mm Nitrile Rubber O-Rings

ID:
CA$17.79 Regular price
CA/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • Rigid couplings are used mainly on low speed or low torque applications where the shafts are an identical size and are not subject to misalignment
  • Widely used in DIY robots as: gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship etc.
  • Package Contents(19pcs in Total): 2pcs x Couplings with 8pcs M4 Set Screws, 5pcs x Rods, 12pcs x O-Rings. The rigid type basically does not allow eccentricity, it must be fully adjusted during use
  • 5-5mm Aluminum Alloy Coupling Size(L*D): 20x12mm/0.78"x0.47"; 304 Stainless Steel Size: 250x5mm/9.84"x0.2"; Nitrile Rubber O-Rings Size(OD*ID*T): 9x5x2mm/0.35"x0.2"x0.08"
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly, high torque with rigidity, low inertia and excellent sensitivity
  • In stock, ready to ship
Cart
Cart
About this item
  • Rigid couplings are used mainly on low speed or low torque applications where the shafts are an identical size and are not subject to misalignment
  • Widely used in DIY robots as: gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship etc.
  • Package Contents(19pcs in Total): 2pcs x Couplings with 8pcs M4 Set Screws, 5pcs x Rods, 12pcs x O-Rings. The rigid type basically does not allow eccentricity, it must be fully adjusted during use
  • 5-5mm Aluminum Alloy Coupling Size(L*D): 20x12mm/0.78"x0.47"; 304 Stainless Steel Size: 250x5mm/9.84"x0.2"; Nitrile Rubber O-Rings Size(OD*ID*T): 9x5x2mm/0.35"x0.2"x0.08"
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly, high torque with rigidity, low inertia and excellent sensitivity
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
What is this?
Rigid couplings are used mainly on low speed or low torque applications where the shafts are an identical size and are not subject to misalignment.

What will I get?
Coupling:
Material: Aluminum Alloy
Through Angle: 180 Degrees
Thread Size: M4 (8pcs Set Screws Included)
Bore Diameter: 5-5mm / 0.2"-0.2"
Size: 20x12mm / 0.78"x0.47" (L*D)
Rod:
Material: 304 Stainless Steel
Size: 250x5mm / 9.84"x0.2" (L*D)
O-Rings:
Material: Nitrile Rubber
Size: 9x5x2mm / 0.35"x0.2"x0.08" (OD*ID*T)
Package Contents(19in1): 2pcs x Couplings, 8pcs x M4 Set Screws, 5pcs x Rods, 12pcs x O-Rings

Are there any advantages of the product?
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly, high torque with rigidity, low inertia and excellent sensitivity.

How to use it?
Widely used in DIY robots as: gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship etc.

What should  I notice?
The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
CA$17.79 Regular price
CA/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

What is this?
Rigid couplings are used mainly on low speed or low torque applications where the shafts are an identical size and are not subject to misalignment.

What will I get?
Coupling:
Material: Aluminum Alloy
Through Angle: 180 Degrees
Thread Size: M4 (8pcs Set Screws Included)
Bore Diameter: 5-5mm / 0.2"-0.2"
Size: 20x12mm / 0.78"x0.47" (L*D)
Rod:
Material: 304 Stainless Steel
Size: 250x5mm / 9.84"x0.2" (L*D)
O-Rings:
Material: Nitrile Rubber
Size: 9x5x2mm / 0.35"x0.2"x0.08" (OD*ID*T)
Package Contents(19in1): 2pcs x Couplings, 8pcs x M4 Set Screws, 5pcs x Rods, 12pcs x O-Rings

Are there any advantages of the product?
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly, high torque with rigidity, low inertia and excellent sensitivity.

How to use it?
Widely used in DIY robots as: gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship etc.

What should  I notice?
The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'CA').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)