Home Automobiles & MotorcyclesReplacement PartsBody & TrimSound Heat Insulation Mat
Harfington 197mil 5mm 21.4sqft Car Heat Sound Deadener Insulation Mat Liner 79" x 39"

197mil 5mm 21.4sqft Car Heat Sound Deadener Insulation Mat Liner 79" x 39"

ID:
CA$94.63 Regular price
CA/
About this item
  • Our Liner has the same characteristics and excellent noise insulator properties as rubber foam.It absolutely doesn't absorb water & has no unlike polyurethane foam.It has a very low weight, oil and petrol resistant.
  • The material used is an excellent insulator! The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
  • This great product will keep the inside of your ride cool and quiet,it's easy to install and keeps out the heat and unwanted noise.
  • Keeps heat in-cold out in the winter,keeps cold in-heat out in the summer.In the winter,the engine temperature is very high, but outside is very low when driving,which make car parts damaged easier.
  • Application:exterior bulkhead,firewall,hood,engine compartment,engine bays,boot,wheel arch,body panels,load floor,interior bulkhead.
  • In stock, ready to ship
Cart
Cart
About this item
  • Our Liner has the same characteristics and excellent noise insulator properties as rubber foam.It absolutely doesn't absorb water & has no unlike polyurethane foam.It has a very low weight, oil and petrol resistant.
  • The material used is an excellent insulator! The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
  • This great product will keep the inside of your ride cool and quiet,it's easy to install and keeps out the heat and unwanted noise.
  • Keeps heat in-cold out in the winter,keeps cold in-heat out in the summer.In the winter,the engine temperature is very high, but outside is very low when driving,which make car parts damaged easier.
  • Application:exterior bulkhead,firewall,hood,engine compartment,engine bays,boot,wheel arch,body panels,load floor,interior bulkhead.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Feature:
  • Sound insulation, improves the ride quality in your vehicle by reducing engine noise, tyre whine, road noise, wind noise.
  • Heat insulation, slow down the car paint ageing.
  • Easy to cut, peel, and apply. Fit all kinds of vehicle types.
  • Self sticking backing and waterproof, dustproof, flame retardant.
  • Placement of Using: Hood, Ceiling, Door, Cockpit Floor, Tailgate, Firewall and U Type Wall, Front fender, Front and Back Wheels
Specification:
  • Color: Silver Tone
  • Material: Glassfiber, Closed Cell Foam
  • Total Coverage Area: 21.5 sqft
  • Thickness: 5mm / 0.2 inch / 197 mil
  • Mat Size: 200x100cm /79"x39."(L*W)
Note: 
  • Not to be applied directly to heat source including: exhaust pipes, mufflers or hot pipes.
How to Installation:
  • Decide which part you want to insulate first: car roof, car floor, car doors or a hood.
  • Remove the panels. Properly clean and degrease the surface prior to installation of mat.
  • Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.
  • When your sheet is ready to used, lay that down to the surface. Flatten the sheet with hands to avoid air bubbles. Then use a roller tools will make insulation materials and sheet metal firm fit.
Installation Notices:
  • Do not cover the chassis wiring or air holes when you installation.
  • Appropriate use of adhesive tape will strengthen connections effect.
  • It would be good to wear the gloves when working.
  • You could heat it to make it soft, then compacted by hand.
Package Include:
  • 1 x Sound Deadener Mat
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
CA$94.63 Regular price
CA/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Feature:
  • Sound insulation, improves the ride quality in your vehicle by reducing engine noise, tyre whine, road noise, wind noise.
  • Heat insulation, slow down the car paint ageing.
  • Easy to cut, peel, and apply. Fit all kinds of vehicle types.
  • Self sticking backing and waterproof, dustproof, flame retardant.
  • Placement of Using: Hood, Ceiling, Door, Cockpit Floor, Tailgate, Firewall and U Type Wall, Front fender, Front and Back Wheels
Specification:
  • Color: Silver Tone
  • Material: Glassfiber, Closed Cell Foam
  • Total Coverage Area: 21.5 sqft
  • Thickness: 5mm / 0.2 inch / 197 mil
  • Mat Size: 200x100cm /79"x39."(L*W)
Note: 
  • Not to be applied directly to heat source including: exhaust pipes, mufflers or hot pipes.
How to Installation:
  • Decide which part you want to insulate first: car roof, car floor, car doors or a hood.
  • Remove the panels. Properly clean and degrease the surface prior to installation of mat.
  • Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.
  • When your sheet is ready to used, lay that down to the surface. Flatten the sheet with hands to avoid air bubbles. Then use a roller tools will make insulation materials and sheet metal firm fit.
Installation Notices:
  • Do not cover the chassis wiring or air holes when you installation.
  • Appropriate use of adhesive tape will strengthen connections effect.
  • It would be good to wear the gloves when working.
  • You could heat it to make it soft, then compacted by hand.
Package Include:
  • 1 x Sound Deadener Mat
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'CA').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time
30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)