{"title":"Fabricating • Machining • Dies","description":"","products":[{"product_id":"p-1682658","title":"Round Threading Dies Metric Thread Adjustable Right Hand High-Speed Steel (HSS) Round Die Screw Thread Cutting Dies for Thread Repair","description":"\u003col\u003e\n\u003cli\u003eMetric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.\u003c\/li\u003e\n\u003cli\u003eConical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1\/4 to 1\/2 turn to facilitate the discharge of chips from the chip removal hole.\u003c\/li\u003e\n\u003cli\u003eThe thread die is perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.\u003c\/li\u003e\n\u003cli\u003eProper lubricating oil should be added to the cutting edge of the die when tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"M19 x 1.25","offer_id":47497628451065,"sku":"f24060600ux0112","price":9.97,"currency_code":"USD","in_stock":true},{"title":"M18 x 0.5","offer_id":47497628483833,"sku":"f24060600ux0105","price":10.38,"currency_code":"USD","in_stock":true},{"title":"M18 x 0.75","offer_id":47497628516601,"sku":"f24060600ux0106","price":10.02,"currency_code":"USD","in_stock":true},{"title":"M19 x 1","offer_id":47497628582137,"sku":"f24060600ux0111","price":9.97,"currency_code":"USD","in_stock":true},{"title":"M18 x 2.5","offer_id":47497628647673,"sku":"f24060600ux0108","price":10.09,"currency_code":"USD","in_stock":true},{"title":"M19 x 0.5","offer_id":47497628713209,"sku":"f24060600ux0109","price":10.31,"currency_code":"USD","in_stock":true},{"title":"M19 x 0.75","offer_id":47497628745977,"sku":"f24060600ux0110","price":9.97,"currency_code":"USD","in_stock":true},{"title":"M18 x 1.25","offer_id":47497628778745,"sku":"f24060600ux0107","price":10.04,"currency_code":"USD","in_stock":true},{"title":"M20 x 1.75","offer_id":47497628549369,"sku":"f24060600ux0116","price":9.99,"currency_code":"USD","in_stock":true},{"title":"M20 x 1.25","offer_id":47497628614905,"sku":"f24060600ux0115","price":9.97,"currency_code":"USD","in_stock":true},{"title":"M20 x 0.75","offer_id":47497628680441,"sku":"f24060600ux0114","price":10.4,"currency_code":"USD","in_stock":true},{"title":"M20 x 0.5","offer_id":47497628811513,"sku":"f24060600ux0113","price":9.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24060600ux0112_ux_g03.jpg?v=1773218889"},{"product_id":"p-1686553","title":"Hex Threading Die Metric Thread Right Hand High Speed Steel Rethreading Fixed Die Screw Cutting Tapping Repair Tool","description":"\u003col\u003e\n\u003cli\u003eHex threading dies are made from high speed steel (HSS), which offers excellent hardness, wear resistance, and heat resistance for durability and extended tool life. Precise, clean threads can be produced on a variety of materials including metal, plastic and wood.\u003c\/li\u003e\n\u003cli\u003eThe hexagonal thread dies are designed with six flat sides for easy gripping and rotation during use for user convenience and control. No special holders are required, any large enough wrench will do.\u003c\/li\u003e\n\u003cli\u003eThread dies can process, correct or clean external threads. Suitable for thread processing on stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc. in pipe, plate, machinery maintenance and repair. Used for rethreading existing threads in hard materials like metals and creating new threads in soft materials like plastics.\u003c\/li\u003e\n\u003cli\u003eHex rethreading die can be used with die stock (also called die handle or die wrench) to achieve efficient and stable threading. It needs to be reversed regularly to facilitate the discharge of chips from the chip removal hole. When tapping, add appropriate lubricating oil to the cutting edge of the die.\u003c\/li\u003e\n\u003cli\u003eMake sure the workpiece is securely clamped or fixed in place to prevent movement during threading. Apply consistent downward pressure as you turn the metric die clockwise to ensure alignment is maintained and to avoid tilting. After tapping is complete, clean the workpiece and remove any metal shavings or debris.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"M1.8 x 0.35","offer_id":47497640771833,"sku":"f24071700ux0084","price":8.62,"currency_code":"USD","in_stock":true},{"title":"M2.2 x 0.45","offer_id":47497640902905,"sku":"f24071700ux0085","price":8.86,"currency_code":"USD","in_stock":true},{"title":"M3 x 0.5","offer_id":47497640739065,"sku":"f24071700ux0086","price":8.21,"currency_code":"USD","in_stock":true},{"title":"M4.5 x 0.75","offer_id":47497640870137,"sku":"f24071700ux0090","price":8.86,"currency_code":"USD","in_stock":true},{"title":"M5 x 0.5","offer_id":47497640804601,"sku":"f24071700ux0092","price":8.62,"currency_code":"USD","in_stock":true},{"title":"M5 x 0.8","offer_id":47497640837369,"sku":"f24071700ux0091","price":8.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24071700ux0086_ux_g03.jpg?v=1773219237"},{"product_id":"p-1690801","title":"Hex Threading Die Thread Right Hand High Speed Steel Rethreading Fixed Die Screw Cutting Tapping Repair Tool","description":"\u003col\u003e\n\u003cli\u003eHex threading dies are made from high speed steel (HSS), which offers excellent hardness, wear resistance, and heat resistance for durability and extended tool life. Precise, clean threads can be produced on a variety of materials including metal, plastic and wood.\u003c\/li\u003e\n\u003cli\u003eThe hexagonal thread dies are designed with six flat sides for easy gripping and rotation during use for user convenience and control. No special holders are required, any large enough wrench will do.\u003c\/li\u003e\n\u003cli\u003eThread dies can process, correct or clean external threads. Suitable for thread processing on stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc. in pipe, plate, machinery maintenance and repair. Used for rethreading existing threads in hard materials like metals and creating new threads in soft materials like plastics.\u003c\/li\u003e\n\u003cli\u003eHex rethreading die can be used with die stock (also called die handle or die wrench) to achieve efficient and stable threading. It needs to be reversed regularly to facilitate the discharge of chips from the chip removal hole. When tapping, add appropriate lubricating oil to the cutting edge of the die.\u003c\/li\u003e\n\u003cli\u003eMake sure the workpiece is securely clamped or fixed in place to prevent movement during threading. Apply consistent downward pressure as you turn the metric die clockwise to ensure alignment is maintained and to avoid tilting. After tapping is complete, clean the workpiece and remove any metal shavings or debris.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"M10 x 1","offer_id":47497672491257,"sku":"f24071700ux0102","price":9.32,"currency_code":"USD","in_stock":true},{"title":"M10 x 1.5","offer_id":47497672556793,"sku":"f24071700ux0104","price":9.04,"currency_code":"USD","in_stock":true},{"title":"M10 x 0.75","offer_id":47497672622329,"sku":"f24071700ux0101","price":9.32,"currency_code":"USD","in_stock":true},{"title":"M10 x 1.25","offer_id":47497672655097,"sku":"f24071700ux0103","price":9.04,"currency_code":"USD","in_stock":true},{"title":"M6 x 1","offer_id":47497672327417,"sku":"f24071700ux0094","price":8.21,"currency_code":"USD","in_stock":true},{"title":"M6 x 0.5","offer_id":47497672360185,"sku":"f24071700ux0093","price":8.4,"currency_code":"USD","in_stock":true},{"title":"M8 x 0.75","offer_id":47497672392953,"sku":"f24071700ux0097","price":8.86,"currency_code":"USD","in_stock":true},{"title":"M8 x 1.25","offer_id":47497672458489,"sku":"f24071700ux0095","price":8.42,"currency_code":"USD","in_stock":true},{"title":"M8 x 1.5","offer_id":47497672524025,"sku":"f24071700ux0096","price":9.08,"currency_code":"USD","in_stock":true},{"title":"M9 x 1","offer_id":47497672294649,"sku":"f24071700ux0099","price":9.32,"currency_code":"USD","in_stock":true},{"title":"M9 x 0.75","offer_id":47497672425721,"sku":"f24071700ux0098","price":9.32,"currency_code":"USD","in_stock":true},{"title":"M9 x 1.25","offer_id":47497672589561,"sku":"f24071700ux0100","price":9.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24071700ux0099_ux_g03.jpg?v=1773219732"},{"product_id":"p-1702562","title":"Round Threading Dies Metric Thread Adjustable Right Hand High-Speed Steel Round Dies Screw Thread Cutting Die for Thread Repair","description":"\u003col\u003e\n\u003cli\u003eMetric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.\u003c\/li\u003e\n\u003cli\u003eConical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1\/4 to 1\/2 turn to facilitate the discharge of chips from the chip removal hole.\u003c\/li\u003e\n\u003cli\u003eThe thread die is perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.\u003c\/li\u003e\n\u003cli\u003eProper lubricating oil should be added to the cutting edge of the die when tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"M12 x 0.5","offer_id":47497705881849,"sku":"f24060600ux0085","price":7.0,"currency_code":"USD","in_stock":true},{"title":"M12 x 2","offer_id":47497705914617,"sku":"f24060600ux0087","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24060600ux0085_ux_g03.jpg?v=1773220529"},{"product_id":"p-1703025","title":"Hex Threading Die M16 x 2 Metric Thread Right Hand Screw Cutting Fixed Dies","description":"\u003col\u003e\n\u003cli\u003eHex threading dies are made from high speed steel (HSS) 6542, which offers excellent hardness, wear resistance, and heat resistance for durability and extended tool life. Precise, clean threads can be produced on a variety of materials including metal, plastic and wood.\u003c\/li\u003e\n\u003cli\u003eThe hexagonal thread dies are designed with six flat sides for easy gripping and rotation during use for user convenience and control. No special holders are required, any large enough wrench will do.\u003c\/li\u003e\n\u003cli\u003eThread dies can process, correct or clean external threads. Suitable for thread processing on stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc. in pipe, plate, machinery maintenance and repair. Used for rethreading existing threads in hard materials like metals and creating new threads in soft materials like plastics.\u003c\/li\u003e\n\u003cli\u003eHex rethreading die can be used with die stock (also called die handle or die wrench) to achieve efficient and stable threading. It needs to be reversed regularly to facilitate the discharge of chips from the chip removal hole. When tapping, add appropriate lubricating oil to the cutting edge of the die.\u003c\/li\u003e\n\u003cli\u003eMake sure the workpiece is securely clamped or fixed in place to prevent movement during threading. Apply consistent downward pressure as you turn the metric die clockwise to ensure alignment is maintained and to avoid tilting. After tapping is complete, clean the workpiece and remove any metal shavings or debris.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"Default Title","offer_id":47497709224185,"sku":"f24071700ux0135","price":11.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24071700ux0135_ux_g03.jpg?v=1777250428"},{"product_id":"p-1718153","title":"Round Threading Die Metric Thread Adjustable Right Hand High-Speed Steel (HSS) Round Die Screw Thread Cutting Die for Thread Repair","description":"\u003col\u003e\n\u003cli\u003eMetric dies are made of 6542 (M2) high-speed steel with high hardness and toughness, ensuring rigidity and stability during processing. They are wear-resistant, have high torque, and have excellent cutting performance, making them very suitable for repair and maintenance work.\u003c\/li\u003e\n\u003cli\u003eConical lock hole, strong locking force, not easy to loosen. Grease the surface to prevent rust, clear threads, and easy maintenance. In addition, the thread die is easy to use and can be used with the die stock (also called die handle or die wrench). It should be reversed every 1\/4 to 1\/2 turn to facilitate the discharge of chips from the chip removal hole.\u003c\/li\u003e\n\u003cli\u003eThe thread die is perfect for re-threading existing threads in hard materials like metal and making new threads in soft materials such as plastic. Use for general thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. It is very suitable for maintenance and repair work of pipes, plates, and machinery.\u003c\/li\u003e\n\u003cli\u003eProper lubricating oil should be added to the cutting edge of the die when tapping. The end of the bar should be chamfered 1*45 degrees to avoid excessive chamfering that makes cutting difficult. The diameter of the bar should be smaller than the required nominal diameter of the thread to avoid cutting difficulties that may damage the die teeth.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"M1.6 x 0.35","offer_id":47497726132473,"sku":"f24060600ux0062","price":6.49,"currency_code":"USD","in_stock":true},{"title":"M1.8 x 0.35","offer_id":47497726165241,"sku":"f24060600ux0063","price":6.49,"currency_code":"USD","in_stock":true},{"title":"M1 x 0.25","offer_id":47497726198009,"sku":"f24060600ux0060","price":6.49,"currency_code":"USD","in_stock":true},{"title":"M1.5 x 0.3","offer_id":47497726230777,"sku":"f24060600ux0061","price":6.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24060600ux0062_ux_g03.jpg?v=1773220909"},{"product_id":"p-1735429","title":"Hex Threading Die M12 x 1.5 Metric Thread Right Hand Screw Cutting Fixed Dies","description":"\u003col\u003e\n\u003cli\u003eHex threading dies are made from high speed steel (HSS) 6542, which offers excellent hardness, wear resistance, and heat resistance for durability and extended tool life. Precise, clean threads can be produced on a variety of materials including metal, plastic and wood.\u003c\/li\u003e\n\u003cli\u003eThe hexagonal thread dies are designed with six flat sides for easy gripping and rotation during use for user convenience and control. No special holders are required, any large enough wrench will do.\u003c\/li\u003e\n\u003cli\u003eThread dies can process, correct or clean external threads. Suitable for thread processing on stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc. in pipe, plate, machinery maintenance and repair. Used for rethreading existing threads in hard materials like metals and creating new threads in soft materials like plastics.\u003c\/li\u003e\n\u003cli\u003eHex rethreading die can be used with die stock (also called die handle or die wrench) to achieve efficient and stable threading. It needs to be reversed regularly to facilitate the discharge of chips from the chip removal hole. When tapping, add appropriate lubricating oil to the cutting edge of the die.\u003c\/li\u003e\n\u003cli\u003eMake sure the workpiece is securely clamped or fixed in place to prevent movement during threading. Apply consistent downward pressure as you turn the metric die clockwise to ensure alignment is maintained and to avoid tilting. After tapping is complete, clean the workpiece and remove any metal shavings or debris.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"Default Title","offer_id":47497736749305,"sku":"f24071700ux0123","price":10.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24071700ux0123_ux_g03.jpg?v=1774001898"},{"product_id":"p-1766852","title":"Hex Threading Die M12 x 1.25 Metric Thread Right Hand Screw Cutting Fixed Dies","description":"\u003col\u003e\n\u003cli\u003eHex threading dies are made from high speed steel (HSS) 6542, which offers excellent hardness, wear resistance, and heat resistance for durability and extended tool life. Precise, clean threads can be produced on a variety of materials including metal, plastic and wood.\u003c\/li\u003e\n\u003cli\u003eThe hexagonal thread dies are designed with six flat sides for easy gripping and rotation during use for user convenience and control. No special holders are required, any large enough wrench will do.\u003c\/li\u003e\n\u003cli\u003eThread dies can process, correct or clean external threads. Suitable for thread processing on stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc. in pipe, plate, machinery maintenance and repair. Used for rethreading existing threads in hard materials like metals and creating new threads in soft materials like plastics.\u003c\/li\u003e\n\u003cli\u003eHex rethreading die can be used with die stock (also called die handle or die wrench) to achieve efficient and stable threading. It needs to be reversed regularly to facilitate the discharge of chips from the chip removal hole. When tapping, add appropriate lubricating oil to the cutting edge of the die.\u003c\/li\u003e\n\u003cli\u003eMake sure the workpiece is securely clamped or fixed in place to prevent movement during threading. Apply consistent downward pressure as you turn the metric die clockwise to ensure alignment is maintained and to avoid tilting. After tapping is complete, clean the workpiece and remove any metal shavings or debris.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Harfington","offers":[{"title":"Default Title","offer_id":47497749070073,"sku":"f24071700ux0122","price":12.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_f24071700ux0122_ux_g03.jpg?v=1773231181"},{"product_id":"p-1534847","title":"30mm Round Die Stock Handle Wrench for Metric M10-M11 Round Threading Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M10-M11 Metric Dies \/ 30mm Outer Dia. Dies\u003c\/li\u003e\n\u003cli\u003eRound Die Stock Size: 30mm \/ 1.18\" \u003c\/li\u003e\n\u003cli\u003eTotal Size: 255mm x 14mm \/ 10.04\" x 0.55\" (L*T)\u003c\/li\u003e\n\u003cli\u003eMaterial: Zinc Alloy\u003c\/li\u003e\n\u003cli\u003eSurface Treatment: Pray-paint Coating\u003c\/li\u003e\n\u003cli\u003ePackage Contains: 1 x Round Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eRound die holder is made of zinc alloy, which has good corrosion resistance, a beautiful shape, and is relatively light and portable. The paint coating on the surface provides additional protection against rust and wear, to extend the service life of adjustable wrenches.\u003c\/li\u003e\n\u003cli\u003eRound die stock handle is designed with 5 adjustable screws to fix the die, die frame can firmly fix the round die and is easy to operate. The frame helps to keep the cutting tool aligned. It can ensure that the thread spacing is even and cut to the required specifications.\u003c\/li\u003e\n\u003cli\u003eDie handle wrench (when used with round dies) can be used on mild steel, aluminum, plastics, and most metals, helping to process, repair, correct, clean external threads, or simply remove bolts and threaded rods. Suitable for house renovation, DIY home improvement projects, construction, auto repair, factories, etc.\u003c\/li\u003e\n\u003cli\u003eThe positioning slot of the mould (not included) should be aligned with the tightening screw of the wrench, and the screw should be inserted into the mould slot and tightened. Before you start tapping, apply cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eEvery 1\/4~1\/2 turn needs to be reversed to facilitate the discharge of chips from the chip removal hole. Apply even and consistent pressure when turning the handle. Tighten the mould base's adjustable screws firmly around the mould to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471727636729,"sku":"a24062300ux0605","price":13.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0605_ux_g03.jpg?v=1780343904"},{"product_id":"p-1091765","title":"5\/8-18 UNF Tap and Die Set with 38mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 5\/8-18 UNF; Thread Length: 26mm \/ 1.02\"; Square Shank Size: 10mm \/ 0.39\"; Overall Length: 95mm \/ 3.74\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 5\/8-18 UNF; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 10mm \/ 0.39\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Capacity: 26mm-38mm (M12-M16); Overall Length: 306mm \/ 12.05\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471727898873,"sku":"a20112100ux0022","price":32.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0022_ux_g03.jpg?v=1780343917"},{"product_id":"p-1143103","title":"Die Stock Handle Wrench 25mmx9mm M7-M9 Metric Round Die Holder 2pcs","description":"\u003cp\u003eThis die stock helps you overcome damaged bolts and threads.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaterial: Zinc Alloy\u0026amp;Carbon Steel\u003c\/p\u003eFit Capacity Size: M7-M9 \/ 12mm-25mm\u003cbr\u003e\u003cp\u003eFit Die Size: 25x9mm \/ 0.98x0.31 inch(DiaxW)\u003c\/p\u003e\u003cp\u003eOverall Length: 205mm\/ 8.07 inch\u003c\/p\u003e\u003cp\u003eHandle Length: 72mm \/ 2.83 inch\u003c\/p\u003e\u003cp\u003eHandle Diameter: 8mm\/0.31 inch\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e5-screw design to fix the dies.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003eDie Stock, also called die handle is for use in round dies only.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThis die stock is for using with a 25mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut unthreaded or damaged bar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003e2 X Round Die Stock\u003c\/span\u003e\u003c\/p\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471728259321,"sku":"a19041000ux0345","price":14.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a19041000ux0345_ux_g03.jpg?v=1780343932"},{"product_id":"p-1067970","title":"20mm ID Round Die Stocke Holder Adjustable Wrench for M3.5-M6 Round Die","description":"\u003cp\u003eFeatures:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHelpful Tools - The equipment is important to the process of creating uniform threads on different types of screws, bolts, and pipes and Essentially, is a frame that helps to keep the cutting tools in alignment, thus ensuring that the threads are evenly spaced and are cut to the specifications required.\u003c\/li\u003e\n\u003cli\u003eEasy to Use - Adjustabel die handle has plain die stock handles to make it easy to grip and control.\u003c\/li\u003e\n\u003cli\u003eHeavy Marterial - Rugged steel construction with set screws is best suited for applications requiring efficient and clean cutting of external threads. Die holders have a rugged construction with set screws that hold the die firmly in place.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Tool Steel and Alloy Steel\u003c\/li\u003e\n\u003cli\u003eSurface Treatment: Plated Chrome\u0026amp;Electrodusting\u003c\/li\u003e\n\u003cli\u003eFit Capacity Size: M3.5-M6 \/ 15mm-20mm\u003c\/li\u003e\n\u003cli\u003eFit Hole Size: 20*8mm(Dia*H)\u003c\/li\u003e\n\u003cli\u003eSet Screw Size: 4.7*9.7mm(D*L)\u003c\/li\u003e\n\u003cli\u003eBody Size: 29*10mm(D*H)\u003c\/li\u003e\n\u003cli\u003eOverall Length: 152mm\u003c\/li\u003e\n\u003cli\u003eHandle Length: 65mm\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 7mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePackage Includes:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 X Round Die Stock\u003c\/li\u003e\u003c\/ul\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471728521465,"sku":"a18122900ux0401","price":7.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a18122900ux0401_ux_g03.jpg?v=1780343945"},{"product_id":"p-1534839","title":"20mm Round Die Stock Handle Wrench for Metric M3-M4 Round Threading Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M3-M4 Metric Dies \/ 20mm Outer Dia. Dies\u003c\/li\u003e\n\u003cli\u003eRound Die Stock Size: 20mm \/ 0.79\" \u003c\/li\u003e\n\u003cli\u003eTotal Size: 172mm x 9mm \/ 6.77\" x 0.35\" (L*T)\u003c\/li\u003e\n\u003cli\u003eMaterial: Zinc Alloy\u003c\/li\u003e\n\u003cli\u003eSurface Treatment: Pray-paint Coating\u003c\/li\u003e\n\u003cli\u003ePackage Contains: 1 x Round Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eRound die holder is made of zinc alloy, which has good corrosion resistance, a beautiful shape, and is relatively light and portable. The paint coating on the surface provides additional protection against rust and wear, to extend the service life of adjustable wrenches.\u003c\/li\u003e\n\u003cli\u003eRound die stock handle is designed with 5 adjustable screws to fix the die, die frame can firmly fix the round die and is easy to operate. The frame helps to keep the cutting tool aligned. It can ensure that the thread spacing is even and cut to the required specifications.\u003c\/li\u003e\n\u003cli\u003eDie handle wrench (when used with round dies) can be used on mild steel, aluminum, plastics, and most metals, helping to process, repair, correct, clean external threads, or simply remove bolts and threaded rods. Suitable for house renovation, DIY home improvement projects, construction, auto repair, factories, etc.\u003c\/li\u003e\n\u003cli\u003eThe positioning slot of the mould (not included) should be aligned with the tightening screw of the wrench, and the screw should be inserted into the mould slot and tightened. Before you start tapping, apply cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eEvery 1\/4~1\/2 turn needs to be reversed to facilitate the discharge of chips from the chip removal hole. Apply even and consistent pressure when turning the handle. Tighten the mould base's adjustable screws firmly around the mould to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471728881913,"sku":"a24062300ux0603","price":10.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0603_ux_g03.jpg?v=1780343959"},{"product_id":"p-1534841","title":"5\/8-18 UNF Tap and Die Set 38mm Round Die Stock Handle Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 5\/8-18 UNF; Thread Length: 22mm \/ 0.87\"; Square Shank Size: 12.5mm \/ 0.49\"; Overall Length: 95mm \/ 3.74\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 5\/8-18 UNF; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 14mm \/ 0.55\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Die Size: M12-M14 Metric Dies \/ 38mm Outer Dia. Dies; Total Size: 315mm x 19mm \/ 12.4\" x 0.75\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471729144057,"sku":"a24062300ux0600","price":33.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0600_ux_g03.jpg?v=1780343972"},{"product_id":"p-1084248","title":"Die Stock Handle Wrench 20mmx7mm M4-M6 Metric Round Die Holder 2pcs","description":"\u003cp\u003eThis die stock helps you overcome damaged bolts and threads.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaterial: Zinc Alloy\u0026amp;Carbon Steel\u003c\/p\u003eFit Capacity Size: M4-M6 \/ 6mm-20mm\u003cbr\u003e\u003cp\u003eFit Die Size: 20x7mm\/0.79x0.28 inch(DiaxW)\u003c\/p\u003e\u003cp\u003eOverall Length: 174mm\/6.85 inch\u003c\/p\u003e\u003cp\u003eHandle Length: 62mm\/2.44 inch\u003c\/p\u003e\u003cp\u003eHandle Diameter: 7mm\/0.28 inch\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4-screw design to fix the dies.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003eDie Stock, also called die handle is for use in round dies only.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThis die stock is for using with a 20mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut unthreaded or damaged bar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003e2 X Round Die Stock\u003c\/span\u003e\u003c\/p\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471729471737,"sku":"a19041000ux0343","price":12.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a19041000ux0343_ux_g03.jpg?v=1780343985"},{"product_id":"p-1107529","title":"10-32 UNF Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 10-32 UNF; Thread Length: 23mm \/ 0.91\"; Square Shank Size: 4mm \/ 0.16\"; Overall Length: 63mm \/ 2.48\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 10-32 UNF; Outside Diameter (OD): 20mm \/ 0.79\"; Thickness: 7mm \/ 0.28\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 20mm x 5mm \/ 0.79\" x 0.2\" (D*H); Fit Capacity: 11mm-20mm (M3-M4); Overall Length: 175mm \/ 6.9\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 20mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471730290937,"sku":"a20112100ux0004","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0004_ux_g03.jpg?v=1780343997"},{"product_id":"p-1535004","title":"5\/16-32 UNEF Tap and Die Set 25mm Round Die Stock Handle  Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 5\/16-32 UNEF; Thread Length: 21mm \/ 0.83\"; Square Shank Size: 5mm \/ 0.2\"; Overall Length: 64mm \/2.52\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 5\/16-32 UNEF; Outside Diameter (OD): 25mm \/ 0.98\"; Thickness: 10mm \/ 0.39\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 25mm x 9mm \/ 0.98\" x 0.35\" (D*H); Fit Die Size: M7-M9 Metric Dies \/ 25mm Outer Dia. Dies; Total Size: 235mm x 13mm \/ 9.25\" x 0.51\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 25mm (0.98\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471730782457,"sku":"a24062300ux0599","price":18.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0599_ux_g03.jpg?v=1780344027"},{"product_id":"p-1102961","title":"1\/2-28 UNEF Tap and Die Set with 38mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 1\/2-28 UNEF; Thread Length: 21mm \/ 0.83\"; Square Shank Size: 7mm \/ 0.28\"; Overall Length: 80mm \/ 3.15\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 1\/2-28 UNEF; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 10mm \/ 0.39\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Capacity: 26mm-38mm (M12-M16); Overall Length: 306mm \/ 12.05\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471731405049,"sku":"a20112100ux0019","price":27.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0019_ux_g03.jpg?v=1780344044"},{"product_id":"p-1084246","title":"Die Stock Handle Wrench 45mmx18mm M16-M20 Metric Round Die Holder 175mm Handle","description":"\u003cp\u003eThis die stock helps you overcome damaged bolts and threads.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaterial: Zinc Alloy\u0026amp;Carbon Steel\u003c\/p\u003eFit Capacity Size: M16-M20 \/ 31mm-45mm\u003cbr\u003e\u003cp\u003eOverall Length: 450mm\/ 17.72 inch\u003c\/p\u003e\u003cp\u003eFit Die Size: 45x18mm \/ 1.77x0.71 inch(DiaxW)\u003c\/p\u003e\u003cp\u003eHandle Length: 175mm \/ 6.89 inch\u003c\/p\u003e\u003cp\u003eHandle Diameter: 12mm\/0.47 inch\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e5-screw design to fix the dies.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003eDie Stock, also called die handle is for use in round dies only.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThis die stock is for using with a 45mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut unthreaded or damaged bar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003e1 X Round Die Stock\u003c\/span\u003e\u003c\/p\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471731929337,"sku":"a19041000ux0348","price":23.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a19041000ux0348_ux_g03.jpg?v=1780344061"},{"product_id":"p-1120336","title":"1\/4-28 UNF Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 1\/4-28 UNF; Thread Length: 25mm \/ 0.98\"; Square Shank Size: 5mm \/ 0.2\"; Overall Length: 73mm \/ 2.87\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 1\/4-28 UNF; Outside Diameter (OD): 20mm \/ 0.79\"; Thickness: 7mm \/ 0.28\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 20mm x 5mm \/ 0.79\" x 0.2\" (D*H); Fit Capacity: 11mm-20mm (M3-M4); Overall Length: 175mm \/ 6.9\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 20mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471731994873,"sku":"a20112100ux0007","price":14.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0007_ux_g03.jpg?v=1780344072"},{"product_id":"p-1114255","title":"8-32 UNC Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 8-32 UNC; Thread Length: 19mm \/ 0.75\"; Square Shank Size: 3.5mm \/ 0.14\"; Overall Length: 59mm \/ 2.32\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 8-32 UNC; Outside Diameter (OD): 20mm \/ 0.79\"; Thickness: 5mm \/ 0.2\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 20mm x 5mm \/ 0.79\" x 0.2\" (D*H); Fit Capacity: 11mm-20mm (M3-M4); Overall Length: 175mm \/ 6.9\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 20mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471732453625,"sku":"a20112100ux0002","price":13.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0002_ux_g03.jpg?v=1780344094"},{"product_id":"p-1079844","title":"Die Stock Handle Wrench 20mmx5mm M3-M4 Metric Round Die Holder","description":"\u003cp\u003eThis die stock helps you overcome damaged bolts and threads.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaterial: Zinc Alloy\u0026amp;Carbon Steel\u003c\/p\u003eFit Capacity Size: M3-M4 \/ 11.5mm-20mm\u003cbr\u003e\u003cp\u003eFit Die Size: 20x5mm\/0.79x0.2 inch(Dia*W)\u003c\/p\u003e\u003cp\u003eOverall Length: 174mm\/6.85 inch\u003c\/p\u003e\u003cp\u003eHandle Length: 62mm\/2.44 inch\u003c\/p\u003e\u003cp\u003eHandle Diameter: 7mm\/0.28 inch\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4-screw design to fix the dies.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003eDie Stock, also called die handle is for use in round dies only.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThis die stock is for using with a 20mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut unthreaded or damaged bar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003e1 X Round Die Stock\u003c\/span\u003e\u003c\/p\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471732879609,"sku":"a19041000ux0340","price":9.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a19041000ux0340_ux_g03.jpg?v=1780344110"},{"product_id":"p-1095725","title":"1\/4-20 UNC Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 1\/4-20 UNC; Thread Length: 28mm \/ 1.1\"; Square Shank Size: 5mm \/ 0.2\"; Overall Length: 73mm \/ 2.87\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 1\/4-20 UNC; Outside Diameter (OD): 20mm \/ 0.79\"; Thickness: 7mm \/ 0.28\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 20mm x 5mm \/ 0.79\" x 0.2\" (D*H); Fit Capacity: 11mm-20mm (M3-M4); Overall Length: 175mm \/ 6.9\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 20mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471733272825,"sku":"a20112100ux0006","price":13.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0006_ux_g03.jpg?v=1780344125"},{"product_id":"p-1592115","title":"55mm x 22mm Die Stock Handle Wrench for Metric M22-M26 \/ 55mm OD Round Dies","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDie Stock Size: 55mm x 22mm \/ 2.17 inch x 0.87 inch\u003c\/li\u003e\n\u003cli\u003eFit Die Size: Metric M22-M26 \/ 55mm OD Die\u003c\/li\u003e\n\u003cli\u003eTotal Length: 550mm \/ 21.65 inch\u003c\/li\u003e\n\u003cli\u003eHandle Length: 195mm \/ 7.68 inch\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 14mm \/ 0.55 inch\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon Steel, Zinc alloy \u003c\/li\u003e\n\u003cli\u003ePackage Includes:1 x Round Die Stock\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cstrong\u003eDescriptions:\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cli\u003eThe die stock wrench is made of zinc alloy and carbon steel, with high hardness and good toughness, ensuring that it will not break or deform under high pressure. It is wear-resistant, rust-resistant and corrosion-resistant, which greatly extends the service life of the tool and can be used for a long time.\u003c\/li\u003e\n\u003cli\u003eThe round die holder is equipped with an adjustable screw that can be turned to fix the die. The die holder can firmly fix the round die and is easy to operate. The handles on both sides are knurled and can be disassembled for easy carrying.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench set can help to process, correct, clean external threads, or repair damaged bolts and threads, or simply remove bolts and threaded rods. Good for rethreading existing threads in hard materials such as metal, or making new threads in soft materials such as plastics.\u003c\/li\u003e\n\u003cli\u003eAlign the die positioning groove (optional) with the middle fastening screw of the die wrench, insert the screw into the die groove and tighten it. Reverse once every 1\/4-1\/2 turn to facilitate the discharge of chips from the chip removal hole, and add appropriate amount of lubricating oil to the die cutting edge when tapping.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471734157561,"sku":"a24102800ux2340","price":27.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24102800ux2340_ux_g03.jpg?v=1780344144"},{"product_id":"p-1534835","title":"38mm Round Die Stock Handle Wrench for Metric M12-M14 Round Threading Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M12-M14 Metric Dies \/ 38mm Outer Dia. Dies\u003c\/li\u003e\n\u003cli\u003eRound Die Stock Size: 38mm \/ 1.5\" \u003c\/li\u003e\n\u003cli\u003eTotal Size: 310mm x 17mm \/ 12.2\" x 0.67\" (L*T).\u003c\/li\u003e\n\u003cli\u003eMaterial: Zinc Alloy\u003c\/li\u003e\n\u003cli\u003eSurface Treatment: Pray-paint Coating\u003c\/li\u003e\n\u003cli\u003ePackage Contains: 1 x Round Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eRound die holder is made of zinc alloy, which has good corrosion resistance, a beautiful shape, and is relatively light and portable. The paint coating on the surface provides additional protection against rust and wear, to extend the service life of adjustable wrenches.\u003c\/li\u003e\n\u003cli\u003eRound die stock handle is designed with 5 adjustable screws to fix the die, die frame can firmly fix the round die and is easy to operate. The frame helps to keep the cutting tool aligned. It can ensure that the thread spacing is even and cut to the required specifications.\u003c\/li\u003e\n\u003cli\u003eDie handle wrench (when used with round dies) can be used on mild steel, aluminum, plastics, and most metals, helping to process, repair, correct, clean external threads, or simply remove bolts and threaded rods. Suitable for house renovation, DIY home improvement projects, construction, auto repair, factories, etc.\u003c\/li\u003e\n\u003cli\u003eThe positioning slot of the mould (not included) should be aligned with the tightening screw of the wrench, and the screw should be inserted into the mould slot and tightened. Before you start tapping, apply cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eEvery 1\/4~1\/2 turn needs to be reversed to facilitate the discharge of chips from the chip removal hole. Apply even and consistent pressure when turning the handle. Tighten the mould base's adjustable screws firmly around the mould to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471734518009,"sku":"a24062300ux0606","price":17.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0606_ux_g03.jpg?v=1780344159"},{"product_id":"p-1534846","title":"1\/2-28 UNEF Tap and Die Set 38mm Round Die Stock Handle  Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 1\/2-28 UNEF; Thread Length: 21mm \/ 0.83\"; Square Shank Size: 9mm \/ 0.35\"; Overall Length: 80mm \/ 3.15\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 1\/2-28 UNEF; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 10mm \/ 0.39\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Die Size: M12-M14 Metric Dies \/ 38mm Outer Dia. Dies; Total Size: 315mm x 19mm \/ 12.4\" x 0.75\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471734812921,"sku":"a24062300ux0602","price":29.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0602_ux_g03.jpg?v=1780344174"},{"product_id":"p-1120334","title":"9\/16-12 UNC Tap and Die Set with 38mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 9\/16-12 UNC; Thread Length: 31mm \/ 1.22\"; Square Shank Size: 9mm \/ 0.35\"; Overall Length: 95mm \/ 3.74\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 9\/16-12 UNC; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 14mm \/ 0.55\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Capacity: 26mm-38mm (M12-M16); Overall Length: 306mm \/ 12.05\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471735140601,"sku":"a20112100ux0020","price":29.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0020_ux_g03.jpg?v=1780344190"},{"product_id":"p-1095722","title":"3\/8-24 UNF Tap and Die Set with 30mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 3\/8-24 UNF; Thread Length: 21mm \/ 0.83\"; Square Shank Size: 5.6mm \/ 0.22\"; Overall Length: 76mm \/ 2.99\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 3\/8-24 UNF; Outside Diameter (OD): 30mm \/ 1.18\"; Thickness: 11mm \/ 0.43\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 30mm x 11mm \/ 1.18\" x 0.43\" (D*H); Fit Capacity: 20mm-30mm (M9-M11); Overall Length: 256mm \/ 10.08\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 30mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471735566585,"sku":"a20112100ux0012","price":20.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0012_ux_g03.jpg?v=1780344206"},{"product_id":"p-1114256","title":"5\/16-32 UNEF Tap and Die Set with 25mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 5\/16-32 UNEF; Thread Length: 17mm \/ 0.67\"; Square Shank Size: 5mm \/ 0.2\"; Overall Length: 66mm \/ 2.6\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 5\/16-32 UNEF; Outside Diameter (OD): 25mm \/ 0.98\"; Thickness: 9mm \/ 0.35\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 25mm x 9mm \/ 0.98\" x 0.35\" (D*H); Fit Capacity: 16mm-25mm (M7-M8); Overall Length: 207mm \/ 8.15\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 25mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471736189177,"sku":"a20112100ux0010","price":16.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0010_ux_g03.jpg?v=1780344227"},{"product_id":"p-1535003","title":"5\/8-24 UNEF Tap and Die Set 38mm Round Die Stock Handle  Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 5\/8-24 UNEF; Thread Length: 21mm \/ 0.83\"; Square Shank Size: 12mm \/ 0.47\"; Overall Length: 92mm \/ 3.62\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 5\/8-24 UNEF; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 10mm \/ 0.39\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Die Size: M12-M14 Metric Dies \/ 38mm Outer Dia. Dies; Total Size: 315mm x 19mm \/ 12.4\" x 0.75\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471736680697,"sku":"a24062300ux0601","price":32.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0601_ux_g03.jpg?v=1780344242"},{"product_id":"p-1034867","title":"55mm ID Round Die Stock Holder Adjustable Wrench for M24-M27 Round Die","description":"\u003cp\u003eFeatures:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHelpful Tools - The equipment is important to the process of creating uniform threads on different types of screws, bolts, and pipes and is a frame that helps to keep the cutting tools in alignment, thus ensuring that the threads are evenly spaced and are cut to the specifications required.\u003c\/li\u003e\n\u003cli\u003eEasy to Use - Adjustable die handle has plain die stock handles to make it easy to grip and control.\u003c\/li\u003e\n\u003cli\u003eHeavy Material - Rugged steel construction with set screws is best suited for applications requiring efficient and clean cutting of external threads. Die holders have a rugged construction with set screws that hold the die firmly in place.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Tool Steel and Alloy Steel\u003c\/li\u003e\n\u003cli\u003eSurface Treatment: Plated Chrome\u0026amp;Electrodusting\u003c\/li\u003e\n\u003cli\u003eFit Capacity Size: M24-M27 \/ 36mm-55mm\u003c\/li\u003e\n\u003cli\u003eFit Hole Size: 55*22mm(Dia*H)\u003c\/li\u003e\n\u003cli\u003eSet Screw Size: 7.5*22mm(D*L)\u003c\/li\u003e\n\u003cli\u003eBody Size: 66*25mm(D*H)\u003c\/li\u003e\n\u003cli\u003eOverall Length: 480mm\u003c\/li\u003e\n\u003cli\u003eHandle Length: 190mm\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 14mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePackage Includes:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 X Round Die Stock\u003c\/li\u003e\u003c\/ul\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471737139449,"sku":"a18122900ux0399","price":29.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a18122900ux0399_ux_g03.jpg?v=1780344260"},{"product_id":"p-1114259","title":"1\/2-13 UNC Tap and Die Set with 38mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 1\/2-13 UNC; Thread Length: 30.5mm \/ 1.2\"; Square Shank Size: 7mm \/ 0.28\"; Overall Length: 89mm \/ 3.5\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 1\/2-13 UNC; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 14mm \/ 0.55\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Capacity: 26mm-38mm (M12-M16); Overall Length: 306mm \/ 12.05\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471737303289,"sku":"a20112100ux0017","price":27.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0017_ux_g03.jpg?v=1780344272"},{"product_id":"p-1095726","title":"4-40 UNC Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 4-40 UNC; Thread Length: 18mm \/ 0.71\"; Square Shank Size: 2.5mm \/ 0.1\"; Overall Length: 51.5mm \/ 2.03\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 4-40 UNC; Outside Diameter (OD): 20mm \/ 0.79\"; Thickness: 5mm \/ 0.2\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 20mm x 5mm \/ 0.79\" x 0.2\" (D*H); Fit Capacity: 11mm-20mm (M3-M4); Overall Length: 175mm \/ 6.9\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 20mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471737368825,"sku":"a20112100ux0001","price":14.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0001_ux_g03.jpg?v=1780344291"},{"product_id":"p-1475777","title":"30mm x 11mm Die Stock Handle Wrench for Metric M10-M11 \/ 3\/8\"-7\/16\" Round Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M10-M11 (Metric) \/ 3\/8\"-7\/16\" (UNC\/UNF) \/ 30mm OD Die\u003c\/li\u003e\n\u003cli\u003eDie Stock Size: 30mm x 11mm \/ 1.18\" x 0.43\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 280mm \/ 11.02\"\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 10mm \/ 0.39\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 100mm \/ 3.94\"\u003c\/li\u003e\n\u003cli\u003eMain Material: Alloy Steel, Plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Black Oxide\u003c\/li\u003e\n\u003cli\u003ePackage Included: 1pcs x Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003eDescriptions:\u003col\u003e\n\u003cli\u003eDie stock, also called die handle or die wrench, is used for securely holding and turning round dies during threading operations. The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eRound die wrench is designed with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).\u003c\/li\u003e\n\u003cli\u003eThe positioning groove of the die (not included) should be aligned with the fastening screws in the middle of the die wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eTips: It needs to be reversed every 1\/4~1\/2 turn to facilitate the chip discharge from the chip hole.  Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471737762041,"sku":"a23101900ux0219","price":12.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a23101900ux0219_ux_g03.jpg?v=1780344307"},{"product_id":"p-1099673","title":"3\/8-32 UNEF Tap and Die Set with 30mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 3\/8-32 UNEF; Thread Length: 18mm \/ 0.71\"; Square Shank Size: 5.6mm \/ 0.22\"; Overall Length: 73mm \/ 2.87\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 3\/8-32 UNEF; Outside Diameter (OD): 30mm \/ 1.18\"; Thickness: 9mm \/ 0.35\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 30mm x 11mm \/ 1.18\" x 0.43\" (D*H); Fit Capacity: 20mm-30mm (M9-M11); Overall Length: 256mm \/ 10.08\"; Material: Cast Iron\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 30mm outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471738253561,"sku":"a20112100ux0013","price":21.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a20112100ux0013_ux_g03.jpg?v=1780344326"},{"product_id":"p-1475722","title":"25mm x 9mm Die Stock Handle Wrench for Metric M7-M9 \/ 5\/16\" Round Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M7-M9 (Metric) \/ 5\/16\" (UNC\/UNF) \/ 25mm OD Die\u003c\/li\u003e\n\u003cli\u003eDie Stock Size: 25mm x 9mm \/ 0.98\" x 0.35\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 232mm \/ 9.13\"\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 11.5mm \/ 0.45\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 83mm \/ 3.27\"\u003c\/li\u003e\n\u003cli\u003eMain Material: Alloy Steel, Plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Black Oxide\u003c\/li\u003e\n\u003cli\u003ePackage Included: 1pcs x Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003eDescriptions:\u003col\u003e\n\u003cli\u003eDie stock, also called die handle or die wrench, is used for securely holding and turning round dies during threading operations. The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eRound die wrench is designed with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).\u003c\/li\u003e\n\u003cli\u003eThe positioning groove of the die (not included) should be aligned with the fastening screws in the middle of the die wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eTips: It needs to be reversed every 1\/4~1\/2 turn to facilitate the chip discharge from the chip hole.  Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471738417401,"sku":"a23101900ux0218","price":11.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a23101900ux0218_ux_g03.jpg?v=1780344341"},{"product_id":"p-1592106","title":"38mm x 14mm Die Stock Handle Wrench for Metric M12-M14 \/ 38mm OD Round Dies","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDie Stock Size: 38mm x 14mm \/ 1.5 inch x 0.56 inch\u003c\/li\u003e\n\u003cli\u003eFit Die Size: Metric M12-M14 \/ 38mm OD Die\u003c\/li\u003e\n\u003cli\u003eTotal Length: 310mm \/ 12.2 inch\u003c\/li\u003e\n\u003cli\u003eHandle Length: 110mm \/ 4.33 inch\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 10mm \/ 0.39 inch\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon Steel, Zinc alloy \u003c\/li\u003e\n\u003cli\u003ePackage Includes:1 x Round Die Stock\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cstrong\u003eDescriptions:\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cli\u003eThe die stock wrench is made of zinc alloy and carbon steel, with high hardness and good toughness, ensuring that it will not break or deform under high pressure. It is wear-resistant, rust-resistant and corrosion-resistant, which greatly extends the service life of the tool and can be used for a long time.\u003c\/li\u003e\n\u003cli\u003eThe round die holder is equipped with an adjustable screw that can be turned to fix the die. The die holder can firmly fix the round die and is easy to operate. The handles on both sides are knurled and can be disassembled for easy carrying.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench set can help to process, correct, clean external threads, or repair damaged bolts and threads, or simply remove bolts and threaded rods. Good for rethreading existing threads in hard materials such as metal, or making new threads in soft materials such as plastics.\u003c\/li\u003e\n\u003cli\u003eAlign the die positioning groove (optional) with the middle fastening screw of the die wrench, insert the screw into the die groove and tighten it. Reverse once every 1\/4-1\/2 turn to facilitate the discharge of chips from the chip removal hole, and add appropriate amount of lubricating oil to the die cutting edge when tapping.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471738712313,"sku":"a24102800ux2338","price":14.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24102800ux2338_ux_g03.jpg?v=1780344354"},{"product_id":"p-1475783","title":"20mm x 5mm Die Stock Handle Wrench for Metric M3-M4 1\/8\"-5\/32\" Round Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M3-M4 (Metric) \/ 1\/8\"-5\/32\" (UNC\/UNF) \/ 20mm OD Die\u003c\/li\u003e\n\u003cli\u003eDie Stock Size: 20mm x 5mm \/ 0.98\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 205mm \/ 8.07\"\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 10mm \/ 0.39\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 75mm \/ 2.95\"\u003c\/li\u003e\n\u003cli\u003eMain Material: Alloy Steel, Plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Black Oxide\u003c\/li\u003e\n\u003cli\u003ePackage Included: 1pcs x Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003eDescriptions:\u003col\u003e\n\u003cli\u003eDie stock, also called die handle or die wrench, is used for securely holding and turning round dies during threading operations. The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eRound die wrench is designed with 4 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).\u003c\/li\u003e\n\u003cli\u003eThe positioning groove of the die (not included) should be aligned with the fastening screws in the middle of the die wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eTips: It needs to be reversed every 1\/4~1\/2 turn to facilitate the chip discharge from the chip hole.  Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471738810617,"sku":"a23101900ux0216","price":9.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a23101900ux0216_ux_g03.jpg?v=1780344369"},{"product_id":"p-1534834","title":"5\/8-11 UNC Tap and Die Set 38mm Round Die Stock Handle  Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 5\/8-11 UNC; Thread Length: 32mm \/ 1.26\"; Square Shank Size: 12.5mm \/ 0.49\"; Overall Length: 102mm \/ 4.02\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 5\/8-11 UNC; Outside Diameter (OD): 14mm \/ 0.55\"; Thickness: 14mm \/ 0.55\"; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Die Size: M12-M14 Metric Dies \/ 38mm Outer Dia. Dies; Total Size: 310mm x 19mm \/ 12.2\" x 0.75\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471738908921,"sku":"a24062300ux0596","price":33.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0596_ux_g03.jpg?v=1780344382"},{"product_id":"p-1475782","title":"45mm x 18mm Die Stock Handle Wrench for Metric M16-M20 \/ 5\/8\"-3\/4\" Round Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M16-M20 (Metric) \/ 5\/8\"-3\/4\" (UNC\/UNF) \/ 45mm OD Die\u003c\/li\u003e\n\u003cli\u003eDie Stock Size: 45mm x 18mm \/ 1.77\" x 0.71\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 455mm \/ 17.91\"\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 15mm \/ 0.59\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 173mm \/ 6.81\"\u003c\/li\u003e\n\u003cli\u003eMain Material: Alloy Steel, Plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Black Oxide\u003c\/li\u003e\n\u003cli\u003ePackage Included: 1pcs x Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003eDescriptions:\u003col\u003e\n\u003cli\u003eDie stock, also called die handle or die wrench, is used for securely holding and turning round dies during threading operations. The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eRound die wrench is designed with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).\u003c\/li\u003e\n\u003cli\u003eThe positioning groove of the die (not included) should be aligned with the fastening screws in the middle of the die wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eTips: It needs to be reversed every 1\/4~1\/2 turn to facilitate the chip discharge from the chip hole.  Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471739072761,"sku":"a23101900ux0221","price":26.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a23101900ux0221_ux_g03.jpg?v=1780344395"},{"product_id":"p-1475779","title":"20mm x 7mm Die Stock Handle Wrench for Metric M4.5-M6 \/ 3\/16\"-1\/4\" Round Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M4.5-M6 (Metric) \/ 3\/16\"-1\/4\" (UNC\/UNF) \/ 20mm OD Die\u003c\/li\u003e\n\u003cli\u003eDie Stock Size: 20mm x 7mm \/ 0.79\" x 0.28\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 205mm \/ 8.07\"\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 10mm \/ 0.39\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 75mm \/ 2.95\"\u003c\/li\u003e\n\u003cli\u003eMain Material: Alloy Steel, Plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Black Oxide\u003c\/li\u003e\n\u003cli\u003ePackage Included: 1pcs x Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003eDescriptions:\u003col\u003e\n\u003cli\u003eDie stock, also called die handle or die wrench, is used for securely holding and turning round dies during threading operations. The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eRound die wrench is designed with 4 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).\u003c\/li\u003e\n\u003cli\u003eThe positioning groove of the die (not included) should be aligned with the fastening screws in the middle of the die wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eTips: It needs to be reversed every 1\/4~1\/2 turn to facilitate the chip discharge from the chip hole.  Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471739171065,"sku":"a23101900ux0217","price":9.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a23101900ux0217_ux_g03.jpg?v=1780344407"},{"product_id":"p-1534842","title":"25mm Round Die Stock Handle Wrench for Metric M7-M9 Round Threading Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M7-M9 Metric Dies \/ 25mm Outer Dia. Dies\u003c\/li\u003e\n\u003cli\u003eRound Die Stock Size: 25mm \/ 0.98\" \u003c\/li\u003e\n\u003cli\u003eTotal Size: 205mm x 11mm \/ 8.07\" x 0.43\" (L*T)\u003c\/li\u003e\n\u003cli\u003eMaterial: Zinc Alloy\u003c\/li\u003e\n\u003cli\u003eSurface Treatment: Pray-paint Coating\u003c\/li\u003e\n\u003cli\u003ePackage Contains: 1 x Round Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eRound die holder is made of zinc alloy, which has good corrosion resistance, a beautiful shape, and is relatively light and portable. The paint coating on the surface provides additional protection against rust and wear, to extend the service life of adjustable wrenches.\u003c\/li\u003e\n\u003cli\u003eRound die stock handle is designed with 5 adjustable screws to fix the die, die frame can firmly fix the round die and is easy to operate. The frame helps to keep the cutting tool aligned. It can ensure that the thread spacing is even and cut to the required specifications.\u003c\/li\u003e\n\u003cli\u003eDie handle wrench (when used with round dies) can be used on mild steel, aluminum, plastics, and most metals, helping to process, repair, correct, clean external threads, or simply remove bolts and threaded rods. Suitable for house renovation, DIY home improvement projects, construction, auto repair, factories, etc.\u003c\/li\u003e\n\u003cli\u003eThe positioning slot of the mould (not included) should be aligned with the tightening screw of the wrench, and the screw should be inserted into the mould slot and tightened. Before you start tapping, apply cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eEvery 1\/4~1\/2 turn needs to be reversed to facilitate the discharge of chips from the chip removal hole. Apply even and consistent pressure when turning the handle. Tighten the mould base's adjustable screws firmly around the mould to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471739302137,"sku":"a24062300ux0604","price":10.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0604_ux_g03.jpg?v=1780344424"},{"product_id":"p-1534843","title":"10-32 UNF Tap and Die Set 20mm Round Die Stock Handle  Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 10-32 UNF; Thread Length: 20mm \/ 0.79\"; Square Shank Size: 5mm \/ 0.2\"; Overall Length: 64mm \/ 2.52\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 10-32 UNF; Outside Diameter (OD): 20mm \/ 0.79\"; Thickness: 7mm \/ 0.28\"; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 20mm x 7mm \/ 0.79\" x 0.28\" (D*H); Fit Die Size: M4.5-M6 Metric Dies \/ 20mm Outer Dia. Dies; Total Size: 205mm x 13mm \/ 8.07\" x 0.51\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 20mm (0.79\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471739465977,"sku":"a24062300ux0595","price":15.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0595_ux_g03.jpg?v=1780344440"},{"product_id":"p-1475780","title":"38mm x 14mm Die Stock Handle Wrench for Metric M12-M14 \/ 1\/2\"-9\/16\" Round Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M12-M14 (Metric) \/ 1\/2\"-9\/16\" (UNC\/UNF) \/ 38mm OD Die\u003c\/li\u003e\n\u003cli\u003eDie Stock Size: 38mm x 14mm \/ 1.5\" x 0.55\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 310mm \/ 12.2\"\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 13mm \/ 0.51\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 112mm \/ 4.41\"\u003c\/li\u003e\n\u003cli\u003eMain Material: Alloy Steel, Plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Black Oxide\u003c\/li\u003e\n\u003cli\u003ePackage Included: 1pcs x Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003eDescriptions:\u003col\u003e\n\u003cli\u003eDie stock, also called die handle or die wrench, is used for securely holding and turning round dies during threading operations. The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eRound die wrench is designed with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).\u003c\/li\u003e\n\u003cli\u003eThe positioning groove of the die (not included) should be aligned with the fastening screws in the middle of the die wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eTips: It needs to be reversed every 1\/4~1\/2 turn to facilitate the chip discharge from the chip hole.  Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471739662585,"sku":"a23101900ux0220","price":15.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a23101900ux0220_ux_g03.jpg?v=1780344456"},{"product_id":"p-1592103","title":"45mm x 18mm Die Stock Handle Wrench for Metric M16-M20 \/ 45mm OD Round Dies","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDie Stock Size: 45mm x 18mm \/ 1.77 inch x 0.71 inch\u003c\/li\u003e\n\u003cli\u003eFit Die Size: Metric M16-M20 \/ 45mm OD Die\u003c\/li\u003e\n\u003cli\u003eTotal Length: 450mm \/ 17.72 inch\u003c\/li\u003e\n\u003cli\u003eHandle Length: 170mm \/ 6.69 inch\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 12mm \/ 0.47 inch\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon Steel, Zinc alloy \u003c\/li\u003e\n\u003cli\u003ePackage Includes:1 x Round Die Stock\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cstrong\u003eDescriptions:\u003c\/strong\u003e\u003cbr\u003e\u003col\u003e\n\u003cli\u003eThe die stock wrench is made of zinc alloy and carbon steel, with high hardness and good toughness, ensuring that it will not break or deform under high pressure. It is wear-resistant, rust-resistant and corrosion-resistant, which greatly extends the service life of the tool and can be used for a long time.\u003c\/li\u003e\n\u003cli\u003eThe round die holder is equipped with an adjustable screw that can be turned to fix the die. The die holder can firmly fix the round die and is easy to operate. The handles on both sides are knurled and can be disassembled for easy carrying.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench set can help to process, correct, clean external threads, or repair damaged bolts and threads, or simply remove bolts and threaded rods. Good for rethreading existing threads in hard materials such as metal, or making new threads in soft materials such as plastics.\u003c\/li\u003e\n\u003cli\u003eAlign the die positioning groove (optional) with the middle fastening screw of the die wrench, insert the screw into the die groove and tighten it. Reverse once every 1\/4-1\/2 turn to facilitate the discharge of chips from the chip removal hole, and add appropriate amount of lubricating oil to the die cutting edge when tapping.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471739760889,"sku":"a24102800ux2342","price":21.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24102800ux2342_ux_g03.jpg?v=1780344475"},{"product_id":"p-1084249","title":"Die Stock Handle Wrench 20mmx7mm M4-M6 Metric Round Die Holder","description":"\u003cp\u003eThis die stock helps you overcome damaged bolts and threads.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaterial: Zinc Alloy\u0026amp;Carbon Steel\u003c\/p\u003eFit Capacity Size: M4-M6 \/ 6mm-20mm\u003cbr\u003e\u003cp\u003eFit Die Size: 20x7mm\/0.79x0.28 inch(DiaxW)\u003c\/p\u003e\u003cp\u003eOverall Length: 174mm\/6.85 inch\u003c\/p\u003e\u003cp\u003eHandle Length: 62mm\/2.44 inch\u003c\/p\u003e\u003cp\u003eHandle Diameter: 7mm\/0.28 inch\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4-screw design to fix the dies.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003eDie Stock, also called die handle is for use in round dies only.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThis die stock is for using with a 20mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut unthreaded or damaged bar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: rgb(17, 17, 17);\"\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(17, 17, 17);\"\u003e1 X Round Die Stock\u003c\/span\u003e\u003c\/p\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471739826425,"sku":"a19041000ux0342","price":9.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a19041000ux0342_ux_g03.jpg?v=1780344489"},{"product_id":"p-1534840","title":"45mm Round Die Stock Handle Wrench for Metric M16-M20 Round Threading Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M16-M20 Metric Dies \/ 45mm Outer Dia. Dies\u003c\/li\u003e\n\u003cli\u003eRound Die Stock Size: 45mm \/ 1.77\" \u003c\/li\u003e\n\u003cli\u003eTotal Size: 435mm x 21mm \/ 17.13\" x 0.83\" (L*T).\u003c\/li\u003e\n\u003cli\u003eMaterial: Zinc Alloy\u003c\/li\u003e\n\u003cli\u003eSurface Treatment: Pray-paint Coating\u003c\/li\u003e\n\u003cli\u003ePackage Contains: 1 x Round Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eRound die holder is made of zinc alloy, which has good corrosion resistance, a beautiful shape, and is relatively light and portable. The paint coating on the surface provides additional protection against rust and wear, to extend the service life of adjustable wrenches.\u003c\/li\u003e\n\u003cli\u003eRound die stock handle is designed with 5 adjustable screws to fix the die, die frame can firmly fix the round die and is easy to operate. The frame helps to keep the cutting tool aligned. It can ensure that the thread spacing is even and cut to the required specifications.\u003c\/li\u003e\n\u003cli\u003eDie handle wrench (when used with round dies) can be used on mild steel, aluminum, plastics, and most metals, helping to process, repair, correct, clean external threads, or simply remove bolts and threaded rods. Suitable for house renovation, DIY home improvement projects, construction, auto repair, factories, etc.\u003c\/li\u003e\n\u003cli\u003eThe positioning slot of the mould (not included) should be aligned with the tightening screw of the wrench, and the screw should be inserted into the mould slot and tightened. Before you start tapping, apply cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eEvery 1\/4~1\/2 turn needs to be reversed to facilitate the discharge of chips from the chip removal hole. Apply even and consistent pressure when turning the handle. Tighten the mould base's adjustable screws firmly around the mould to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471740186873,"sku":"a24062300ux0607","price":25.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0607_ux_g03.jpg?v=1780344499"},{"product_id":"p-1534837","title":"10-24 UNC Tap and Die Set 20mm Round Die Stock Handle  Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 10-24 UNC; Thread Length: 21mm \/ 0.83\"; Square Shank Size: 5mm \/ 0.2\"; Overall Length: 64mm \/ 2.52\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 10-24 UNC; Outside Diameter (OD): 20mm \/ 0.79\"; Thickness: 7mm \/ 0.28\"; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 20mm x 7mm \/ 0.79\" x 0.28\" (D*H); Fit Die Size: M4.5-M6 Metric Dies \/ 20mm Outer Dia. Dies; Total Size: 205mm x 13mm \/ 8.07\" x 0.51\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 20mm (0.79\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471740285177,"sku":"a24062300ux0598","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0598_ux_g03.jpg?v=1780344513"},{"product_id":"p-1535005","title":"1\/2-20 UNF Tap and Die Set 38mm Round Die Stock Handle  Wrench with Plastic Handle, High Speed Steel Machine Thread Tap and Round Die Threading Tool","description":"Specifications:\u003cbr\u003eThread Tap: Thread Size: 1\/2-20 UNF; Thread Length: 22mm \/ 0.87\"; Square Shank Size: 9mm \/ 0.35\"; Overall Length: 84mm \/ 3.31\"; Tolerance Grade: 2B; Material: High Speed Steel\u003cbr\u003eRound Die: Thread Size: 1\/2-20 UNF; Outside Diameter (OD): 38mm \/ 1.5\"; Thickness: 14mm \/ 0.55\"; Accuracy class: 6g; Material: Tool Steel (9CrSi)\u003cbr\u003eDie Stock: Size: 38mm x 14mm \/ 1.5\" x 0.55\" (D*H); Fit Die Size: M12-M14 Metric Dies \/ 38mm Outer Dia. Dies; Total Size: 310mm x 20mm \/ 12.2\" x 0.79\" (L*T); Material: Zinc Alloy + Plastic Handle\u003cbr\u003e\u003cbr\u003eDescriptions:\u003cbr\u003eThe round die is suitable for re-threading existing threads in hard materials like metal, or making new male threads in soft material like plastic. Good for general purpose threading.\u003cbr\u003eThe high-speed steel tap can make or repair female threads, great for general purpose applications. Machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. Use with tapping oil to get higher quality threads and more durable taps.\u003cbr\u003eThe die stock is suited for 38mm (1-1\/2\") outside diameter round dies. Provides good wear resistance for long service life. With adjustable screws, the die stock can securely hold round dies and is easy to operate. Plastic handle design, comfortable to hold, non-slip and labor-saving.\u003cbr\u003eThe die and tap set with die wrench can greatly improve the efficiency of processing threads, and are necessary tools for hand tapping operation. Can be used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Thread Tap, 1 x Round Die, 1 x Die Stock Handle Wrench","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471740481785,"sku":"a24062300ux0593","price":30.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a24062300ux0593_ux_g03.jpg?v=1780344529"},{"product_id":"p-1475781","title":"16mm x 5mm Die Stock Handle Wrench for Metric M1-M3 \/ 1\/16\"-3\/32\" Round Dies","description":"\u003cul\u003e\n\u003cli\u003eFit Die Size: M1-M3 (Metric) \/ 1\/16\"-3\/32\" (UNC\/UNF) \/ 16mm OD Die\u003c\/li\u003e\n\u003cli\u003eDie Stock Size: 16mm x 5mm \/ 0.63\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 128mm \/ 5.04\"\u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 9mm \/ 0.35\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 42mm \/ 1.65\"\u003c\/li\u003e\n\u003cli\u003eMain Material: Alloy Steel, Plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Black Oxide\u003c\/li\u003e\n\u003cli\u003ePackage Included: 1pcs x Die Stock Handle Wrench\u003c\/li\u003e\n\u003c\/ul\u003eDescriptions:\u003col\u003e\n\u003cli\u003eDie stock, also called die handle or die wrench, is used for securely holding and turning round dies during threading operations. The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eRound die wrench is designed with 4 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.\u003c\/li\u003e\n\u003cli\u003eThe die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).\u003c\/li\u003e\n\u003cli\u003eThe positioning groove of the die (not included) should be aligned with the fastening screws in the middle of the die wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.\u003c\/li\u003e\n\u003cli\u003eTips: It needs to be reversed every 1\/4~1\/2 turn to facilitate the chip discharge from the chip hole.  Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"uxcell","offers":[{"title":"Default Title","offer_id":48471740547321,"sku":"a23101900ux0224","price":8.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/files\/ux_a23101900ux0224_ux_g03.jpg?v=1780344544"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/2477\/6095\/collections\/MRO6989adee1da6fbaat9sDDXF2Iw9cnLXidBuSL.jpg?v=1770630645","url":"https:\/\/www.harfington.com\/en-ca\/collections\/dies-c-302355.oembed","provider":"Harfington","version":"1.0","type":"link"}