Home Fastening & JoiningSealingO-RingsRubber O-Rings
Harfington 2pcs TC Oil Seal 20x30x7mm FKM Rubber Double Lip Rotary Shaft Seal

2pcs TC Oil Seal 20x30x7mm FKM Rubber Double Lip Rotary Shaft Seal

ID:
AU$13.00 Regular price
AU/
Wholesale Price
20%OFF
Order $5000+
  • 25%OFF
    Order $5000+
  • 20%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • Size: Outer diameter: 30mm / 1.18", Inner diameter: 20mm / 0.79", Thickness: 7mm / 0.28"; Model: TC/TG; Operating pressure: less than 0.05MPa / 7.25psi; Hardness: Shore 70A; Recommended operating temperature: -4°F (-20°C) to 428°F (220°C)
  • Feature: The rotary shaft oil seal is made of FKM rubber, which is waterproof, oil-resistant, heat-resistant, has good sealing performance, wear resistance, and acid and alkali resistance. Its double-lip design, with clamping springs and rubber housing, enhances the sealing performance and effectively protects the shaft and bearings from dust, foreign matter intrusion, and oil or grease leakage
  • Application: TC/TG type oil seals are crucial sealing components in mechanical equipment, preventing lubricating oil or grease leakage and blocking dust and water from entering the machine. Widely used in industrial, automotive, marine, and motorcycle components such as crankshafts, camshafts, differentials, shock absorbers, engines, axles, and front and rear wheels
  • Installation: Before installation, apply lubricating grease to the surface of the shaft seal and the bearing to facilitate installation. The steps are as follows: 1. Position the oil seal: Place the oil seal stably in the installation position, ensuring the coaxiality of the oil seal and the hole. 2. Apply even pressure: Using a special tool or pressure plate, apply even pressure to press the oil seal into the hole
  • Note: Confirm size before purchasing. Not suitable for phosphate-based hydraulic oils or gear oils with extremely high content
  • In stock, ready to ship
Cart
Cart
About this item
  • Size: Outer diameter: 30mm / 1.18", Inner diameter: 20mm / 0.79", Thickness: 7mm / 0.28"; Model: TC/TG; Operating pressure: less than 0.05MPa / 7.25psi; Hardness: Shore 70A; Recommended operating temperature: -4°F (-20°C) to 428°F (220°C)
  • Feature: The rotary shaft oil seal is made of FKM rubber, which is waterproof, oil-resistant, heat-resistant, has good sealing performance, wear resistance, and acid and alkali resistance. Its double-lip design, with clamping springs and rubber housing, enhances the sealing performance and effectively protects the shaft and bearings from dust, foreign matter intrusion, and oil or grease leakage
  • Application: TC/TG type oil seals are crucial sealing components in mechanical equipment, preventing lubricating oil or grease leakage and blocking dust and water from entering the machine. Widely used in industrial, automotive, marine, and motorcycle components such as crankshafts, camshafts, differentials, shock absorbers, engines, axles, and front and rear wheels
  • Installation: Before installation, apply lubricating grease to the surface of the shaft seal and the bearing to facilitate installation. The steps are as follows: 1. Position the oil seal: Place the oil seal stably in the installation position, ensuring the coaxiality of the oil seal and the hole. 2. Apply even pressure: Using a special tool or pressure plate, apply even pressure to press the oil seal into the hole
  • Note: Confirm size before purchasing. Not suitable for phosphate-based hydraulic oils or gear oils with extremely high content
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Application: TC/TG type oil seals are crucial sealing components in mechanical equipment, preventing lubricating oil or grease leakage and blocking dust and water from entering the machine. Widely used in industrial, automotive, marine, and motorcycle components such as crankshafts, camshafts, differentials, shock absorbers, engines, axles, and front and rear wheels.

Installation: Before installation, apply lubricating grease to the surface of the shaft seal and the bearing to facilitate installation. The steps are as follows: 1. Position the oil seal: Place the oil seal stably in the installation position, ensuring the coaxiality of the oil seal and the hole. 2. Apply even pressure: Using a special tool or pressure plate, apply even pressure to press the oil seal into the hole.

Feature: The rotary shaft oil seal is made of FKM rubber, which is waterproof, oil-resistant, heat-resistant, has good sealing performance, wear resistance, and acid and alkali resistance. Its double-lip design, with clamping springs and rubber housing, enhances the sealing performance and effectively protects the shaft and bearings from dust, foreign matter intrusion, and oil or grease leakage.

Note: During installation, ensure the inner diameter of the shaft matches the inner diameter of the oil seal to prevent wear caused by misalignment. Not suitable for phosphate-based hydraulic oils or gear oils with extremely high content.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
AU$13.00 Regular price
AU/
Wholesale Price
20%OFF
Order $5000+
  • 25%OFF
    Order $5000+
  • 20%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20 Free upgraded to DHL over AU$300
By default, UPS or DHL or equivalent express delivery options will be selected, with an estimated delivery time of 4-7 days. Except for remote areas or extremely large volume products.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Application: TC/TG type oil seals are crucial sealing components in mechanical equipment, preventing lubricating oil or grease leakage and blocking dust and water from entering the machine. Widely used in industrial, automotive, marine, and motorcycle components such as crankshafts, camshafts, differentials, shock absorbers, engines, axles, and front and rear wheels.

Installation: Before installation, apply lubricating grease to the surface of the shaft seal and the bearing to facilitate installation. The steps are as follows: 1. Position the oil seal: Place the oil seal stably in the installation position, ensuring the coaxiality of the oil seal and the hole. 2. Apply even pressure: Using a special tool or pressure plate, apply even pressure to press the oil seal into the hole.

Feature: The rotary shaft oil seal is made of FKM rubber, which is waterproof, oil-resistant, heat-resistant, has good sealing performance, wear resistance, and acid and alkali resistance. Its double-lip design, with clamping springs and rubber housing, enhances the sealing performance and effectively protects the shaft and bearings from dust, foreign matter intrusion, and oil or grease leakage.

Note: During installation, ensure the inner diameter of the shaft matches the inner diameter of the oil seal to prevent wear caused by misalignment. Not suitable for phosphate-based hydraulic oils or gear oils with extremely high content.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AU').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to DHL over AU$300

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)