Home Automobiles & MotorcyclesSensorsIntake Manifold Pressure Sensor
Harfington Manifold Absolute Pressure MAP Sensor for Audi Q5 2018-2020 No.5Q0906207 1 pcs

Manifold Absolute Pressure MAP Sensor for Audi Q5 2018-2020 No.5Q0906207 1 pcs

ID:
AU$51.00 Regular price
AU/
About this item
  • Installation:1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Pafor Rams>Special), input intercept/gradient per manual’s voltage/pressure.6.Test: To drive and check loose/solder issues.
  • Feature: Made of good quality material. It is stable and durable, use for a long time.
  • Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit.
  • OE Number:5Q0906207
  • Fitment: for Audi Q5 2018-2020, for Audi Q7 2017-2023 , for Audi Q8 2019-2023, for Audi S3 2015-2020, for Audi S4 2018-2023, for Audi SQ5 2018-2020, for Audi SQ7 2022-2023 , for Audi SQ8 2022-2023, for Audi A3 2015-2020, for Audi A4 2017-2020 , for Audi A7 2018, for Audi A4 Quattro 2017-2020, for Audi A4 allroad 2017-2020, for Audi TT 2016-2018
  • In stock, ready to ship
Cart
Cart
About this item
  • Installation:1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Pafor Rams>Special), input intercept/gradient per manual’s voltage/pressure.6.Test: To drive and check loose/solder issues.
  • Feature: Made of good quality material. It is stable and durable, use for a long time.
  • Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit.
  • OE Number:5Q0906207
  • Fitment: for Audi Q5 2018-2020, for Audi Q7 2017-2023 , for Audi Q8 2019-2023, for Audi S3 2015-2020, for Audi S4 2018-2023, for Audi SQ5 2018-2020, for Audi SQ7 2022-2023 , for Audi SQ8 2022-2023, for Audi A3 2015-2020, for Audi A4 2017-2020 , for Audi A7 2018, for Audi A4 Quattro 2017-2020, for Audi A4 allroad 2017-2020, for Audi TT 2016-2018
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:

Fitment:

  • for Audi Q5 2018-2020
  • for Audi Q7 2017-2023
  • for Audi Q8 2019-2023
  • for Audi S3 2015-2020
  • for Audi S4 2018-2023
  • for Audi SQ5 2018-2020
  • for Audi SQ7 2022-2023
  • for Audi SQ8 2022-2023
  • for Audi A3 2015-2020
  • for Audi A4 2017-2020
  • for Audi A7 2018
  • for Audi A4 Quattro 2017-2020
  • for Audi A4 allroad 2017-2020
  • for Audi TT 2016-2018

OE Number:

  • 5Q0906207/5Q0906207A/5Q0906207B

Product Characteristics:

  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.

Package included:

  • 1 pcs MAP Sensor

Installation:

  • 1.Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3.ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5.Calibrate: In UTEC (Edit Maps>Pafor Rams>Special), input intercept/gradient per manual’s voltage/pressure.
  • 6.Test: To drive and check loose/solder issues.

Note:

  • This is a non-OEM product, accessory ONLY!
  • Please make sure your model's ENGINE and TRIM are as described before purchasing!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
AU$51.00 Regular price
AU/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20 Free upgraded to DHL over AU$300
By default, UPS or DHL or equivalent express delivery options will be selected, with an estimated delivery time of 4-7 days. Except for remote areas or extremely large volume products.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Fitment:

  • for Audi Q5 2018-2020
  • for Audi Q7 2017-2023
  • for Audi Q8 2019-2023
  • for Audi S3 2015-2020
  • for Audi S4 2018-2023
  • for Audi SQ5 2018-2020
  • for Audi SQ7 2022-2023
  • for Audi SQ8 2022-2023
  • for Audi A3 2015-2020
  • for Audi A4 2017-2020
  • for Audi A7 2018
  • for Audi A4 Quattro 2017-2020
  • for Audi A4 allroad 2017-2020
  • for Audi TT 2016-2018

OE Number:

  • 5Q0906207/5Q0906207A/5Q0906207B

Product Characteristics:

  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.

Package included:

  • 1 pcs MAP Sensor

Installation:

  • 1.Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3.ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5.Calibrate: In UTEC (Edit Maps>Pafor Rams>Special), input intercept/gradient per manual’s voltage/pressure.
  • 6.Test: To drive and check loose/solder issues.

Note:

  • This is a non-OEM product, accessory ONLY!
  • Please make sure your model's ENGINE and TRIM are as described before purchasing!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AU').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to DHL over AU$300

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)