Home Automobiles & MotorcyclesWheel & Tire Accessories & PartsHub Assemblies
Harfington 4WD 4x4 Manual Front Wheel Locking Hub No.4353069045 for Toyota Land Cruiser

4WD 4x4 Manual Front Wheel Locking Hub No.4353069045 for Toyota Land Cruiser

ID:
AU$141.00 Regular price
AU/
About this item
  • [Easy Installation] Safely raise the vehicle, remove the wheel and the old hub. Clean the surface, align and install the vehicle-specific replacement hub with its gasket, tighten the bolts evenly, and reinstall the wheel. For 4WD engagement: With the vehicle stopped, turn both hubs to LOCK and shift into 4WD. Package Includes 2 pcs Manual wheel locking hubs. Please get a professional video if install it in doubt
  • [Features of Locking Hub Actuator] There are two situations of locking hubs on the front wheels. When 4WD is disengaged, the locking hubs will disconnect the axle and allow it spin freely, rear wheels will achieve vehicle to move. When 4WD is engaged, the front wheels will get torque from the engine, and the locking hubs will lock the front wheels to the front axle. Replace the damaged lock hub in time to get better driving
  • [Quality Locking Hubs]: Using enhanced quality Aluminum Alloy materials, wear-resistant, corrosion-resistant, and long service life. Replace with new locking wheels to provide you with higher AWD fuel economy when unlocked, provide you with better torque power when locked, prevent you from being bothered by the front humming noise, and bring you a good driving experience
  • [Necessity of Front Manual Axle Locking Hubs] Over time, mud, rust, or worn parts inside the hub will prevent the mechanism from sliding into and locking the hub, causing failure to lock the hub, and further causing symptoms such as increased fuel consumption, noise on the highway, and increased front tire wear. It is recommended that you replace it in time. The locking axle meets or exceeds the oem standard, has passed the test, and is matched with the old car, and can be installed directly
  • [OE Number] No.4353069045/43530-69045 Suit for 4WD/ 4X4. for Toyota Land Cruiser 1981-1987, for Toyota 4 Runner 1984-1985, for Toyota Pickup 1981-1985 Please check carefully before purchase
  • In stock, ready to ship
Cart
Cart
About this item
  • [Easy Installation] Safely raise the vehicle, remove the wheel and the old hub. Clean the surface, align and install the vehicle-specific replacement hub with its gasket, tighten the bolts evenly, and reinstall the wheel. For 4WD engagement: With the vehicle stopped, turn both hubs to LOCK and shift into 4WD. Package Includes 2 pcs Manual wheel locking hubs. Please get a professional video if install it in doubt
  • [Features of Locking Hub Actuator] There are two situations of locking hubs on the front wheels. When 4WD is disengaged, the locking hubs will disconnect the axle and allow it spin freely, rear wheels will achieve vehicle to move. When 4WD is engaged, the front wheels will get torque from the engine, and the locking hubs will lock the front wheels to the front axle. Replace the damaged lock hub in time to get better driving
  • [Quality Locking Hubs]: Using enhanced quality Aluminum Alloy materials, wear-resistant, corrosion-resistant, and long service life. Replace with new locking wheels to provide you with higher AWD fuel economy when unlocked, provide you with better torque power when locked, prevent you from being bothered by the front humming noise, and bring you a good driving experience
  • [Necessity of Front Manual Axle Locking Hubs] Over time, mud, rust, or worn parts inside the hub will prevent the mechanism from sliding into and locking the hub, causing failure to lock the hub, and further causing symptoms such as increased fuel consumption, noise on the highway, and increased front tire wear. It is recommended that you replace it in time. The locking axle meets or exceeds the oem standard, has passed the test, and is matched with the old car, and can be installed directly
  • [OE Number] No.4353069045/43530-69045 Suit for 4WD/ 4X4. for Toyota Land Cruiser 1981-1987, for Toyota 4 Runner 1984-1985, for Toyota Pickup 1981-1985 Please check carefully before purchase
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:

OE Number:

  • 4353069045/43530-69045

Fitment:

  • for Toyota Land Cruiser 1981-1987
  • for Toyota 4 Runner 1984-1985
  • for Toyota Pickup 1981-1985

Specification:

  • Color: Silver Tone+ Black + Gold Tone
  • Material: Aluminum Alloy
  • Inner Diameter: 3cm / 1.18"
  • Size: 9 x 8cm / 3.54" x 3.15"
  • Include 2 pcs Manual wheel locking hubs

Necessity to replace Locking Hub:

  • The locking hub may fail to lock the hub because of the sludge, rust, and worn parts inside the vehicles locking hub.
  • Thus causing problems like increased fuel consumption, noise on the highway, serious front wheel wear and tear.
  • Ours adopts durable Aluminum Alloy and reinforced cap with clearly marked for convenient use, anti-corrosion, rust resistance, prolong the service life.

Function of Locking Hub Actuator:

  • Used to locking Please refer to the actual product received wheels.
  • There are two situations of locking hubs on the front wheels.
  • When 4WD is disengaged, the locking hubs will disconnect the axle and allow it spin freely, rear wheels will allow the vehicle to move.
  • When 4WD is engaged, the front wheels will get torque from the engine for the locking hubs will lock the front wheels to the front axle. Replace the damaged lock hub in time to get better driving.
  • This is a non-OEM product, accessory only!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
AU$141.00 Regular price
AU/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20 Free upgraded to DHL over AU$300
By default, UPS or DHL or equivalent express delivery options will be selected, with an estimated delivery time of 4-7 days. Except for remote areas or extremely large volume products.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

OE Number:

  • 4353069045/43530-69045

Fitment:

  • for Toyota Land Cruiser 1981-1987
  • for Toyota 4 Runner 1984-1985
  • for Toyota Pickup 1981-1985

Specification:

  • Color: Silver Tone+ Black + Gold Tone
  • Material: Aluminum Alloy
  • Inner Diameter: 3cm / 1.18"
  • Size: 9 x 8cm / 3.54" x 3.15"
  • Include 2 pcs Manual wheel locking hubs

Necessity to replace Locking Hub:

  • The locking hub may fail to lock the hub because of the sludge, rust, and worn parts inside the vehicles locking hub.
  • Thus causing problems like increased fuel consumption, noise on the highway, serious front wheel wear and tear.
  • Ours adopts durable Aluminum Alloy and reinforced cap with clearly marked for convenient use, anti-corrosion, rust resistance, prolong the service life.

Function of Locking Hub Actuator:

  • Used to locking Please refer to the actual product received wheels.
  • There are two situations of locking hubs on the front wheels.
  • When 4WD is disengaged, the locking hubs will disconnect the axle and allow it spin freely, rear wheels will allow the vehicle to move.
  • When 4WD is engaged, the front wheels will get torque from the engine for the locking hubs will lock the front wheels to the front axle. Replace the damaged lock hub in time to get better driving.
  • This is a non-OEM product, accessory only!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AU').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to DHL over AU$300

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)