Home Automobiles & MotorcyclesSensorsIntake Manifold Pressure Sensor
Harfington No.AA5Z-9F479-C Engine Manifold Absolute Pressure MAP Sensor for Ford F-150 F150 3.5L 2011-2016 for Ford Transit-150/250/350/350 HD 2015-2024

No.AA5Z-9F479-C Engine Manifold Absolute Pressure MAP Sensor for Ford F-150 F150 3.5L 2011-2016 for Ford Transit-150/250/350/350 HD 2015-2024

ID:
AU$30.00 Regular price
AU/
About this item
  • Fitment:This MAP sensor for Ford Expedition V6 3.5L 2015-2017, for Ford F-150 V6 3.5L 2011-2016, for Ford Transit-150 V6 Base, XL, XLT 3.5L 2015-2024, for Ford Transit-250 V6 3.5L Base, PTV 2015-2024, for Ford Transit-350 V6 Base, XL, XLT 3.5L 2015-2021/2023, for Ford Transit-350 HD V6 Base, XL, XLT 3.5L 2015-2024, for Lincoln Navigator V6 3.5L 2015-2017, OE Number:AA5Z9F479C/AS436/5S13389/2251264/CX2401/2MAP0054/MA0056/MAP214/MAP152.
  • Function:This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic unit.
  • Feature:This Manifold Absolute Pressure Sensor adopt with sturdy metal for good heat resistance and durability, anti-rust and corrosion resistance.
  • Installation: 1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.6.Test: To drive and check loose/solder issues.
  • Package Include: 1x Manifold Absolute Pressure Sensor. Please make sure your model's ENGINE and TRIM are as described before purchasing!
  • In stock, ready to ship
Cart
Cart
About this item
  • Fitment:This MAP sensor for Ford Expedition V6 3.5L 2015-2017, for Ford F-150 V6 3.5L 2011-2016, for Ford Transit-150 V6 Base, XL, XLT 3.5L 2015-2024, for Ford Transit-250 V6 3.5L Base, PTV 2015-2024, for Ford Transit-350 V6 Base, XL, XLT 3.5L 2015-2021/2023, for Ford Transit-350 HD V6 Base, XL, XLT 3.5L 2015-2024, for Lincoln Navigator V6 3.5L 2015-2017, OE Number:AA5Z9F479C/AS436/5S13389/2251264/CX2401/2MAP0054/MA0056/MAP214/MAP152.
  • Function:This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic unit.
  • Feature:This Manifold Absolute Pressure Sensor adopt with sturdy metal for good heat resistance and durability, anti-rust and corrosion resistance.
  • Installation: 1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.6.Test: To drive and check loose/solder issues.
  • Package Include: 1x Manifold Absolute Pressure Sensor. Please make sure your model's ENGINE and TRIM are as described before purchasing!
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
OE Number:
  • AA5Z9F479C/AS436/5S13389/2251264/CX2401/2MAP0054/MA0056/MAP214/MAP152
Fitment
  • for Ford Expedition V6 3.5L 2015-2017
  • for Ford F-150 V6 3.5L 2011-2016
  • for Ford Transit-150 V6 Base, XL, XLT 3.5L 2015-2024
  • for Ford Transit-250 V6 3.5L Base, PTV 2015-2024
  • for Ford Transit-350 V6 Base, XL, XLT 3.5L 2015-2021/2023
  • for Ford Transit-350 HD V6 Base, XL, XLT 3.5L 2015-2024
  • for Lincoln Navigator V6 3.5L 2015-2017
Specification
  • Material: Metal, Plastic
  • Size: 4.8X5.5X3.7cm/1.9"x2.2"x1.5"
  • Pin number: 4 Pins
  • This is a non-OEM product, accessory only!
  • Include 1x MAP Sensor
Product Characteristics:
  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.
Installation:
  • 1. Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3. ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4. Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5. Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.
  • 6. Test: To drive and check loose/solder issues.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
AU$30.00 Regular price
AU/
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20 Free upgraded to DHL over AU$300
By default, UPS or DHL or equivalent express delivery options will be selected, with an estimated delivery time of 4-7 days. Except for remote areas or extremely large volume products.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

OE Number:
  • AA5Z9F479C/AS436/5S13389/2251264/CX2401/2MAP0054/MA0056/MAP214/MAP152
Fitment
  • for Ford Expedition V6 3.5L 2015-2017
  • for Ford F-150 V6 3.5L 2011-2016
  • for Ford Transit-150 V6 Base, XL, XLT 3.5L 2015-2024
  • for Ford Transit-250 V6 3.5L Base, PTV 2015-2024
  • for Ford Transit-350 V6 Base, XL, XLT 3.5L 2015-2021/2023
  • for Ford Transit-350 HD V6 Base, XL, XLT 3.5L 2015-2024
  • for Lincoln Navigator V6 3.5L 2015-2017
Specification
  • Material: Metal, Plastic
  • Size: 4.8X5.5X3.7cm/1.9"x2.2"x1.5"
  • Pin number: 4 Pins
  • This is a non-OEM product, accessory only!
  • Include 1x MAP Sensor
Product Characteristics:
  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.
Installation:
  • 1. Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3. ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4. Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5. Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual’s voltage/pressure.
  • 6. Test: To drive and check loose/solder issues.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AU').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to DHL over AU$300

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)