Home FabricatingMachiningDrill BitsTwist Drill BitsStraight Shank Drill Bits
Harfington Drill Bit, 4.5mm Cutting Diameter, 4241 118° Black Maintenance, 12-Pieces

Drill Bit, 4.5mm Cutting Diameter, 4241 118° Black Maintenance, 12-Pieces

ID:
AU$12.00 Regular price
AU/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
About this item
  • ★ Drill Bit Size --- Cutting edge diameter: 4.5mm; shank diameter: 4.5mm; cutting edge length: 49mm / 1.93"; overall length: 79mm / 3.11", Included: 12 Pieces x Drill Bit
  • ★PRACTICAL PERFORMANCE --- The drill bit strikes a perfect balance between cost-efficiency and performance, featuring excellent machinability for general-purpose applications in normal working conditions.
  • ★ Wide Applications --- For acrylic, plastic, wood, soft metals (Cu, Al alloys), commonly used in vehicle maintenance for tasks like drilling sheet metal fasteners, replacing bolt holes, installing brackets, and creating wire harness mounts (not be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.)
  • ★ 4241 High-Speed Steel (HSS) --- The 4241 high-speed steel (HSS) delivers optimal hardness and wear resistance. Featuring a nitriding black finish and 118° point angle design, it provides significant advantages in machining performance and tool life.
  • ★ Useful Tips --- Ensure the drill bit is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation. ​​For beginners: Always verify proper speed and feed rates before formal workpiece machining.
  • In stock, ready to ship
Cart
Cart
About this item
  • ★ Drill Bit Size --- Cutting edge diameter: 4.5mm; shank diameter: 4.5mm; cutting edge length: 49mm / 1.93"; overall length: 79mm / 3.11", Included: 12 Pieces x Drill Bit
  • ★PRACTICAL PERFORMANCE --- The drill bit strikes a perfect balance between cost-efficiency and performance, featuring excellent machinability for general-purpose applications in normal working conditions.
  • ★ Wide Applications --- For acrylic, plastic, wood, soft metals (Cu, Al alloys), commonly used in vehicle maintenance for tasks like drilling sheet metal fasteners, replacing bolt holes, installing brackets, and creating wire harness mounts (not be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.)
  • ★ 4241 High-Speed Steel (HSS) --- The 4241 high-speed steel (HSS) delivers optimal hardness and wear resistance. Featuring a nitriding black finish and 118° point angle design, it provides significant advantages in machining performance and tool life.
  • ★ Useful Tips --- Ensure the drill bit is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation. ​​For beginners: Always verify proper speed and feed rates before formal workpiece machining.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:
Attributes:
* Cutting Edge Diameter: 4.5mm
* Shank Diameter: 4.5mm
* Cutting Edge Length: 49mm / 1.93"
* Overall Length: 79mm / 3.11"
* Material: 4241 High-Speed Steel
* Finish: Nitriding black
* Cutting Angle: 118 Degrees
* Style: Straight Shank

What Is Included:
* 12 Pieces x Drill Bit

Applications & Features:
---Applicable materials: Acrylic, plastic, and wood. soft metals such as copper, aluminum alloys, carbon steel (use with caution for thick plates)
---Applications: The 4241 High-Speed Steel (HSS) Twist Drill is a versatile drill bit suitable for machining medium- to low-hardness materials, commonly used in vehicle maintenance for tasks like drilling sheet metal fasteners, replacing bolt holes, installing brackets, and creating wire harness mounts (non-precision applications)
--- The 4241 high-speed steel (HSS) offers high hardness, excellent wear resistance, and good toughness.
--- Nitriding black finish can enhance the corrosion and wear resistance of twist drills
--- The 118° point angle ensures faster feed rate, higher machining efficiency, sharper drill tip, and more precise positioning. Suitable for handheld drills and bench drills in home repairs and light-duty machining.

Useful Tips:
---The 4241 high-speed steel (HSS) drill bit is designed for low-load machining and should not be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.
---Drill Bit Clamping: The drill bit must be securely clamped, but excessive force must be avoided.  Ensure the drill bit is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation.
---Test Drilling on Scrap Material: Always perform a test drill on scrap material first to verify proper speed and feed rates before machining the actual workpiece.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
AU$12.00 Regular price
AU/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20 Free upgraded to DHL over AU$300
By default, UPS or DHL or equivalent express delivery options will be selected, with an estimated delivery time of 4-7 days. Except for remote areas or extremely large volume products.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Attributes:
* Cutting Edge Diameter: 4.5mm
* Shank Diameter: 4.5mm
* Cutting Edge Length: 49mm / 1.93"
* Overall Length: 79mm / 3.11"
* Material: 4241 High-Speed Steel
* Finish: Nitriding black
* Cutting Angle: 118 Degrees
* Style: Straight Shank

What Is Included:
* 12 Pieces x Drill Bit

Applications & Features:
---Applicable materials: Acrylic, plastic, and wood. soft metals such as copper, aluminum alloys, carbon steel (use with caution for thick plates)
---Applications: The 4241 High-Speed Steel (HSS) Twist Drill is a versatile drill bit suitable for machining medium- to low-hardness materials, commonly used in vehicle maintenance for tasks like drilling sheet metal fasteners, replacing bolt holes, installing brackets, and creating wire harness mounts (non-precision applications)
--- The 4241 high-speed steel (HSS) offers high hardness, excellent wear resistance, and good toughness.
--- Nitriding black finish can enhance the corrosion and wear resistance of twist drills
--- The 118° point angle ensures faster feed rate, higher machining efficiency, sharper drill tip, and more precise positioning. Suitable for handheld drills and bench drills in home repairs and light-duty machining.

Useful Tips:
---The 4241 high-speed steel (HSS) drill bit is designed for low-load machining and should not be used on hardened steels, high-alloy steels, thick stainless steel, or other ultra-hard materials.
---Drill Bit Clamping: The drill bit must be securely clamped, but excessive force must be avoided.  Ensure the drill bit is perpendicular to the workpiece surface—tilting can cause breakage or hole deviation.
---Test Drilling on Scrap Material: Always perform a test drill on scrap material first to verify proper speed and feed rates before machining the actual workpiece.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AU').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to DHL over AU$300

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)