Haus Electrical & LightingAudio AccessoriesAudio AdaptersDC Adapters
Harfington 5Pcs USB3.0 Type A Female Socket Connector Jack Dual Port, 18Pin DIP, Blue

5Pcs USB3.0 Type A Female Socket Connector Jack Dual Port, 18Pin DIP, Blue

ID:
€9,04 Normaler Preis
/
Großhandelspreis
35%Rabatt
Bestellung $5000+
  • 35%Rabatt
    Bestellung $5000+
  • 25%Rabatt
    Bestellung $2000+
  • 15%Rabatt
    Bestellung $800+
  • 10%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
Über diesen Artikel
  • The type a male socket connector jack port provides a replacement for USB interfaces on PCB boards. It can be soldered onto various USB devices such as mice, keyboards, printers, and cameras. It is also suitable for power interface maintenance on electronic devices and for creating power interfaces for DIY projects.
  • This USB soldering connector is made of metal and plastic, supports hot-swapping, and can withstand repeated plugging and unplugging and long-term use. The design ensures stable transmission performance. The compact and lightweight design makes it easy to carry and install, and extremely convenient to use, making it good for DIY USB adapter making. Easy plugging and unplugging effectively improve the ease of daily use, maintenance, and DIY project operation.
  • Size and Package: 5 Pcs x Socket Connector Jack Port, Type: USB3.0 Type A Dual Female, Size: 13 x 15.4 x 17.6 mm / 0.51 x 0.61 x 0.69 inch(L x W x H), Pin Spacing: 2 mm / 0.08 inch, Pin Number: 18 Pins, Features: 90 Degree Pins
  • Install the connector horizontally in the designated position on the device or PCB board according to the installation requirements. Align the pins with the corresponding solder points and solder firmly. After soldering, check that the connector is securely installed and not loose. Finally, connect the device to power and test whether the connector works properly.
  • Note: This USB socket is a DIY and repair accessory. Please confirm that it is compatible with your equipment and PCB board model before use.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • The type a male socket connector jack port provides a replacement for USB interfaces on PCB boards. It can be soldered onto various USB devices such as mice, keyboards, printers, and cameras. It is also suitable for power interface maintenance on electronic devices and for creating power interfaces for DIY projects.
  • This USB soldering connector is made of metal and plastic, supports hot-swapping, and can withstand repeated plugging and unplugging and long-term use. The design ensures stable transmission performance. The compact and lightweight design makes it easy to carry and install, and extremely convenient to use, making it good for DIY USB adapter making. Easy plugging and unplugging effectively improve the ease of daily use, maintenance, and DIY project operation.
  • Size and Package: 5 Pcs x Socket Connector Jack Port, Type: USB3.0 Type A Dual Female, Size: 13 x 15.4 x 17.6 mm / 0.51 x 0.61 x 0.69 inch(L x W x H), Pin Spacing: 2 mm / 0.08 inch, Pin Number: 18 Pins, Features: 90 Degree Pins
  • Install the connector horizontally in the designated position on the device or PCB board according to the installation requirements. Align the pins with the corresponding solder points and solder firmly. After soldering, check that the connector is securely installed and not loose. Finally, connect the device to power and test whether the connector works properly.
  • Note: This USB socket is a DIY and repair accessory. Please confirm that it is compatible with your equipment and PCB board model before use.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Was Ist Das?
Der Typ A Buchsenstecker Dient Als Ersatz Für USB Schnittstellen Auf PCB Platinen. Er Kann Auf Verschiedene USB Geräte Wie Mäuse Tastaturen Drucker Und Kameras Gelötet Werden. Er Eignet Sich Auch Für Die Wartung Von Stromanschlüssen An Elektronikgeräten Und Zum Erstellen Von Stromanschlüssen Für DIY Projekte.

Was Bekomme Ich?
Farbe: Blau
Typ: USB3.0 Typ A Doppelbuchse
Größe: 13 x 15.4 x 17.6 mm / 0.51 x 0.61 x 0.69 Zoll(L x B x H)
Pin Abstand: 2 mm / 0.08 Zoll
Pin Anzahl: 18 Pins
Merkmale: 90 Grad Pins
Lieferumfang: 5 Stk x Buchsenstecker

Welche Vorteile Hat Das Produkt?
1. Dieser USB Lötstecker Besteht Aus Metall Und Kunststoff Unterstützt Hot-Swapping Und Hält Wiederholtes Ein- Und Ausstecken Sowie Langzeitnutzung Aus. Das Design Gewährleistet Stabile Übertragungsleistung.
2. Das Kompakte Und Leichte Design Macht Ihn Einfach Zu Transportieren Und Zu Installieren Sowie Äußerst Praktisch In Der Anwendung Was Ihn Ideal Für DIY USB Adapter Macht. Einfaches Ein- Und Ausstecken Verbessert Die Handhabung Im Täglichen Gebrauch Bei Der Wartung Und In DIY Projekten.

Wie Wird Es Verwendet?
Setzen Sie Den Stecker Waagerecht An Der Vorgesehenen Position Auf Dem Gerät Oder Der PCB Platine Ein. Richten Sie Die Pins An Den Entsprechenden Lötpunkten Aus Und Löten Sie Sie Fest. Nach Dem Löten Prüfen Sie Ob Der Stecker Sicher Befestigt Und Nicht Lose Ist. Schließen Sie Das Gerät An Die Stromversorgung An Und Testen Sie Ob Der Stecker Korrekt Funktioniert.

Worauf Sollte Ich Achten?
Diese USB Buchse Ist Ein DIY Und Reparatur Zubehör. Bitte Stellen Sie Vor Der Verwendung Sicher Dass Sie Mit Ihrem Gerät Und Der PCB Platine Kompatibel Ist.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€9,04 Normaler Preis
/
Großhandelspreis
35%Rabatt
Bestellung $5000+
  • 35%Rabatt
    Bestellung $5000+
  • 25%Rabatt
    Bestellung $2000+
  • 15%Rabatt
    Bestellung $800+
  • 10%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Was Ist Das?
Der Typ A Buchsenstecker Dient Als Ersatz Für USB Schnittstellen Auf PCB Platinen. Er Kann Auf Verschiedene USB Geräte Wie Mäuse Tastaturen Drucker Und Kameras Gelötet Werden. Er Eignet Sich Auch Für Die Wartung Von Stromanschlüssen An Elektronikgeräten Und Zum Erstellen Von Stromanschlüssen Für DIY Projekte.

Was Bekomme Ich?
Farbe: Blau
Typ: USB3.0 Typ A Doppelbuchse
Größe: 13 x 15.4 x 17.6 mm / 0.51 x 0.61 x 0.69 Zoll(L x B x H)
Pin Abstand: 2 mm / 0.08 Zoll
Pin Anzahl: 18 Pins
Merkmale: 90 Grad Pins
Lieferumfang: 5 Stk x Buchsenstecker

Welche Vorteile Hat Das Produkt?
1. Dieser USB Lötstecker Besteht Aus Metall Und Kunststoff Unterstützt Hot-Swapping Und Hält Wiederholtes Ein- Und Ausstecken Sowie Langzeitnutzung Aus. Das Design Gewährleistet Stabile Übertragungsleistung.
2. Das Kompakte Und Leichte Design Macht Ihn Einfach Zu Transportieren Und Zu Installieren Sowie Äußerst Praktisch In Der Anwendung Was Ihn Ideal Für DIY USB Adapter Macht. Einfaches Ein- Und Ausstecken Verbessert Die Handhabung Im Täglichen Gebrauch Bei Der Wartung Und In DIY Projekten.

Wie Wird Es Verwendet?
Setzen Sie Den Stecker Waagerecht An Der Vorgesehenen Position Auf Dem Gerät Oder Der PCB Platine Ein. Richten Sie Die Pins An Den Entsprechenden Lötpunkten Aus Und Löten Sie Sie Fest. Nach Dem Löten Prüfen Sie Ob Der Stecker Sicher Befestigt Und Nicht Lose Ist. Schließen Sie Das Gerät An Die Stromversorgung An Und Testen Sie Ob Der Stecker Korrekt Funktioniert.

Worauf Sollte Ich Achten?
Diese USB Buchse Ist Ein DIY Und Reparatur Zubehör. Bitte Stellen Sie Vor Der Verwendung Sicher Dass Sie Mit Ihrem Gerät Und Der PCB Platine Kompatibel Ist.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)