Haus Automobiles & MotorcyclesSensorsIntake Manifold Pressure Sensor
Harfington No.223657266R Manifold Absolute Pressure MAP Sensor for RENAULT Clio Hatchback

No.223657266R Manifold Absolute Pressure MAP Sensor for RENAULT Clio Hatchback

ID:
€16,95 Normaler Preis
/
Über diesen Artikel
  • Fitment: for RENAULT Clio III Hatchback 1.5 dCi 2005-2012, for RENAULT Scénic 1.9 dCi 1999-2003, for RENAULT Kangoo I Express 1.5 dCi 2001-2005, for RENAULT Clio II Hatchback 1.5 dCi 2001-2006, for NISSAN Xterra 2.8 TDI 4x4 2005-2008
  • OE Number:223657266R/0281002593/93450122/1320683/8200225971
  • Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous pressure information to the engine's electronic control unit.
  • Feature: Made of good quality material. It is stable and durable, use for a long time.
  • Installation: 1.Install: Remove old sensor; mount new in engine bay (passenger side). 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power(note signal). 3. ECU: Plug into ports(see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC(Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure. 6. Test: To drive and check loose/solder issues.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • Fitment: for RENAULT Clio III Hatchback 1.5 dCi 2005-2012, for RENAULT Scénic 1.9 dCi 1999-2003, for RENAULT Kangoo I Express 1.5 dCi 2001-2005, for RENAULT Clio II Hatchback 1.5 dCi 2001-2006, for NISSAN Xterra 2.8 TDI 4x4 2005-2008
  • OE Number:223657266R/0281002593/93450122/1320683/8200225971
  • Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous pressure information to the engine's electronic control unit.
  • Feature: Made of good quality material. It is stable and durable, use for a long time.
  • Installation: 1.Install: Remove old sensor; mount new in engine bay (passenger side). 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power(note signal). 3. ECU: Plug into ports(see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC(Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure. 6. Test: To drive and check loose/solder issues.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Fitment:
  • for RENAULT Clio III Hatchback 1.5 dCi 2005-2012
  • for RENAULT Scénic 1.9 dCi 1999-2003
  • for RENAULT Kangoo I Express 1.5 dCi 2001-2005
  • for RENAULT Clio II Hatchback 1.5 dCi 2001-2006
  • for NISSAN Xterra 2.8 TDI 4x4 2005-2008
OE Number:
  • 223657266R/0281002593/93450122/1320683/8200225971
Product Characteristics:
  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.
Package included:
  • 1 Pc MAP Sensor
Installation:
  • 1. Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3. ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4. Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5. Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure.
  • 6. Test: To drive and check loose/solder issues.
Note:
  • This is a non-OEM product, accessory ONLY!
  • Please make sure your model's ENGINE and TRIM are as described before purchasing!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€16,95 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Fitment:
  • for RENAULT Clio III Hatchback 1.5 dCi 2005-2012
  • for RENAULT Scénic 1.9 dCi 1999-2003
  • for RENAULT Kangoo I Express 1.5 dCi 2001-2005
  • for RENAULT Clio II Hatchback 1.5 dCi 2001-2006
  • for NISSAN Xterra 2.8 TDI 4x4 2005-2008
OE Number:
  • 223657266R/0281002593/93450122/1320683/8200225971
Product Characteristics:
  • This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
  • Direct replacement and installation without special tools, convenient to use.
Package included:
  • 1 Pc MAP Sensor
Installation:
  • 1. Install: Remove old sensor; mount new in engine bay (passenger side).
  • 2. Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
  • 3. ECU: Plug into ports (see manual); ECU under p-side carpet.
  • 4. Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
  • 5. Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure.
  • 6. Test: To drive and check loose/solder issues.
Note:
  • This is a non-OEM product, accessory ONLY!
  • Please make sure your model's ENGINE and TRIM are as described before purchasing!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)