Haus DIYRC AccessoriesPush Rod Connectors
Harfington 2 Pcs Linkage Stoppers Connecting Servo Arm, D4x2.5mm with Nut and Screw

2 Pcs Linkage Stoppers Connecting Servo Arm, D4x2.5mm with Nut and Screw

ID:
€7,68 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 25%Rabatt
    Bestellung $5000+
  • 20%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
Über diesen Artikel
  • The product has a wide range of uses;It is for model plane, widely used on RC plane, RC helicopter, RC Car, control board remote control parts, etc.
  • Color: Gold; Material: Copper; Body Diameter: 4mm/0.16inch; Hole Diameter: 2.5mm/0.1inch; Total Length: 11.2mm/0.44inch; In the package of: 2 x Push Rod Connectors; 2 x M2 Hexagonal Nut; 2 X M3 Screw;
  • The product can quickly adjust the size of the rudder surface and tie rods;This is a copper push rod connector for your model plane,It is used to connect the push rod.
  • Product is easy to use,It's small and easy to install in your RC airplane.
  • Please take more attention that nuts and screws are small.And these parts need to be assembled.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • The product has a wide range of uses;It is for model plane, widely used on RC plane, RC helicopter, RC Car, control board remote control parts, etc.
  • Color: Gold; Material: Copper; Body Diameter: 4mm/0.16inch; Hole Diameter: 2.5mm/0.1inch; Total Length: 11.2mm/0.44inch; In the package of: 2 x Push Rod Connectors; 2 x M2 Hexagonal Nut; 2 X M3 Screw;
  • The product can quickly adjust the size of the rudder surface and tie rods;This is a copper push rod connector for your model plane,It is used to connect the push rod.
  • Product is easy to use,It's small and easy to install in your RC airplane.
  • Please take more attention that nuts and screws are small.And these parts need to be assembled.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Was Ist Das?
Das Produkt Hat Vielfältige Anwendungen Es Ist Für Modellflugzeuge Weit Verbreitet Auf RC Flugzeugen RC Hubschraubern RC Autos Steuerplatine Fernbedienungsteilen Etc

Was Bekomme Ich?
Farbe Gold
Material Kupfer
Körperdurchmesser 4mm/0.16Zoll
Lochdurchmesser 2.5mm/0.1Zoll
Gesamtlänge 11.2mm/0.44Zoll
Im Paket Enthalten
2 x Druckstangenverbinder
2 x M2 Sechskantmutter
2 x M3 Schraube

Welche Vorteile Hat Das Produkt?
Das Produkt Kann Schnell Die Größe Der Ruderfläche Und Spurstangen Anpassen Dies Ist Ein Kupfer Druckstangenverbinder Für Ihr Modellflugzeug Er Wird Zum Verbinden Der Druckstange Verwendet

Wie Wird Es Verwendet?
Produkt Ist Einfach Zu Verwenden Es Ist Klein Und Einfach In Ihrem RC Flugzeug Zu Installieren

Worauf Sollte Ich Achten?
 Bitte Beachten Sie Dass Muttern Und Schrauben Klein Sind Und Diese Teile Zusammengebaut Werden Müssen
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€7,68 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 25%Rabatt
    Bestellung $5000+
  • 20%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Was Ist Das?
Das Produkt Hat Vielfältige Anwendungen Es Ist Für Modellflugzeuge Weit Verbreitet Auf RC Flugzeugen RC Hubschraubern RC Autos Steuerplatine Fernbedienungsteilen Etc

Was Bekomme Ich?
Farbe Gold
Material Kupfer
Körperdurchmesser 4mm/0.16Zoll
Lochdurchmesser 2.5mm/0.1Zoll
Gesamtlänge 11.2mm/0.44Zoll
Im Paket Enthalten
2 x Druckstangenverbinder
2 x M2 Sechskantmutter
2 x M3 Schraube

Welche Vorteile Hat Das Produkt?
Das Produkt Kann Schnell Die Größe Der Ruderfläche Und Spurstangen Anpassen Dies Ist Ein Kupfer Druckstangenverbinder Für Ihr Modellflugzeug Er Wird Zum Verbinden Der Druckstange Verwendet

Wie Wird Es Verwendet?
Produkt Ist Einfach Zu Verwenden Es Ist Klein Und Einfach In Ihrem RC Flugzeug Zu Installieren

Worauf Sollte Ich Achten?
 Bitte Beachten Sie Dass Muttern Und Schrauben Klein Sind Und Diese Teile Zusammengebaut Werden Müssen
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)