Haus DIY3D Printer AccessoriesPneumatic Fittings
Harfington 6Pcs Pneumatic Fitting, 4mm Tube OD x 1/8" NPT Push to Connect Pneumatic Fitting

6Pcs Pneumatic Fitting, 4mm Tube OD x 1/8" NPT Push to Connect Pneumatic Fitting

ID:
€8,62 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 25%Rabatt
    Bestellung $5000+
  • 20%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
Über diesen Artikel
  • Pneumatic fittings are connection accessories used in the pneumatic system, often used to connect the interfaces of pneumatic equipment. In 3D printers, pneumatic fittings are usually used to connect tubes related to cooling systems or other pneumatic components.
  • Pneumatic Tube Fittings: Tube Outer Diameter (OD): 4mm / 0.16 inch; Thread Size: NPT 1/8"; Thread Length: 6mm / 0.24 inch; Wrench Flat Size: 10mm / 0.39 inch; Overall Height: 18mm / 0.71 inch; Material: Nickel-Plated Copper; Model: PC4-01; Mounting Type: Straight Through Push to Connect; In the package of: 6 Pcs x 3D Printers Pneumatic Fittings
  • Easy Installation: The push-to-connect design allows for quick and tool-free installation, making it great for fast setup and maintenance. Outstanding Durability: Made from elected nickel-plated copper material, the fitting provides excellent strength, resistance to corrosion, and long service life. High Pressure Resistance: This pneumatic fitting can withstand strong pressure, not easy to trip, and can work stably in various environments.
  • 1. Simply push the 4mm tubing into the fitting's connector end until it is securely seated; 2. Thread the end of the fitting into the corresponding part of your pneumatic system, tightening it by hand or with a tool as needed; 3. Check for any air leakage or loose connections and ensure the tubing is properly inserted.
  • Please ensure that the tubing you use is 4mm to ensure a proper fit.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • Pneumatic fittings are connection accessories used in the pneumatic system, often used to connect the interfaces of pneumatic equipment. In 3D printers, pneumatic fittings are usually used to connect tubes related to cooling systems or other pneumatic components.
  • Pneumatic Tube Fittings: Tube Outer Diameter (OD): 4mm / 0.16 inch; Thread Size: NPT 1/8"; Thread Length: 6mm / 0.24 inch; Wrench Flat Size: 10mm / 0.39 inch; Overall Height: 18mm / 0.71 inch; Material: Nickel-Plated Copper; Model: PC4-01; Mounting Type: Straight Through Push to Connect; In the package of: 6 Pcs x 3D Printers Pneumatic Fittings
  • Easy Installation: The push-to-connect design allows for quick and tool-free installation, making it great for fast setup and maintenance. Outstanding Durability: Made from elected nickel-plated copper material, the fitting provides excellent strength, resistance to corrosion, and long service life. High Pressure Resistance: This pneumatic fitting can withstand strong pressure, not easy to trip, and can work stably in various environments.
  • 1. Simply push the 4mm tubing into the fitting's connector end until it is securely seated; 2. Thread the end of the fitting into the corresponding part of your pneumatic system, tightening it by hand or with a tool as needed; 3. Check for any air leakage or loose connections and ensure the tubing is properly inserted.
  • Please ensure that the tubing you use is 4mm to ensure a proper fit.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Was Ist Es?
Pneumatische Fittings Sind Verbindungszubehörteile Die In Pneumatischen Systemen Verwendet Werden Oft Zum Verbinden Der Schnittstellen Von Pneumatischen Geräten. In 3D Druckern Werden Pneumatische Fittings Normalerweise Zum Verbinden Von Schläuchen Im Zusammenhang Mit Kühlsystemen Oder Anderen Pneumatischen Komponenten Verwendet.

Was Bekomme Ich?
Pneumatische Schlauchverbinder
Schlauch Außendurchmesser (OD): 4mm / 0.16 Zoll;
Gewindegröße: PT 1/8 Zoll;
Gewindelänge: 6mm / 0.24 Zoll;
Schlüsselweite: 10mm / 0.39 Zoll;
Gesamthöhe: 18mm / 0.71 Zoll;
Material: Vernickeltes Kupfer;
Modell: PC4-01;
Montagetyp: Gerade Durch Push To Connect;
Im Lieferumfang: 6 Stück x 3D Drucker Pneumatische Fittings

Welche Vorteile Hat Dieses Produkt?
  • Einfache Installation: Das Push To Connect Design Ermöglicht Eine Schnelle Und Werkzeuglose Installation Ideal Für Schnelle Einrichtung Und Wartung.
  • Hervorragende Haltbarkeit: Hergestellt Aus Ausgewähltem Vernickeltem Kupfer Bietet Der Fitting Hervorragende Festigkeit Korrosionsbeständigkeit Und Lange Lebensdauer.
  • Hohe Druckbeständigkeit: Dieser Pneumatische Fitting Kann Starkem Druck Standhalten Ist Nicht Anfällig Für Auslösen Und Kann Stabil In Verschiedenen Umgebungen Arbeiten.

Wie Verwendet Man Es?
1. Drücken Sie Den 4mm Schlauch Einfach In Den Anschluss Des Fittings Bis Er Sicher Sitzt;
2. Schrauben Sie Das Ende Des Fittings In Den Entsprechenden Teil Ihres Pneumatischen Systems Und Ziehen Sie Es Bei Bedarf Mit Der Hand Oder Einem Werkzeug Fest;
3. Überprüfen Sie Auf Luftlecks Oder Lose Verbindungen Und Stellen Sie Sicher Dass Der Schlauch Korrekt Eingeführt Ist.

Worauf Sollte Ich Achten?
Bitte Stellen Sie Sicher Dass Sie Einen 4mm Schlauch Verwenden Um Einen Richtigen Sitz Zu Gewährleisten.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€8,62 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 25%Rabatt
    Bestellung $5000+
  • 20%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Was Ist Es?
Pneumatische Fittings Sind Verbindungszubehörteile Die In Pneumatischen Systemen Verwendet Werden Oft Zum Verbinden Der Schnittstellen Von Pneumatischen Geräten. In 3D Druckern Werden Pneumatische Fittings Normalerweise Zum Verbinden Von Schläuchen Im Zusammenhang Mit Kühlsystemen Oder Anderen Pneumatischen Komponenten Verwendet.

Was Bekomme Ich?
Pneumatische Schlauchverbinder
Schlauch Außendurchmesser (OD): 4mm / 0.16 Zoll;
Gewindegröße: PT 1/8 Zoll;
Gewindelänge: 6mm / 0.24 Zoll;
Schlüsselweite: 10mm / 0.39 Zoll;
Gesamthöhe: 18mm / 0.71 Zoll;
Material: Vernickeltes Kupfer;
Modell: PC4-01;
Montagetyp: Gerade Durch Push To Connect;
Im Lieferumfang: 6 Stück x 3D Drucker Pneumatische Fittings

Welche Vorteile Hat Dieses Produkt?
  • Einfache Installation: Das Push To Connect Design Ermöglicht Eine Schnelle Und Werkzeuglose Installation Ideal Für Schnelle Einrichtung Und Wartung.
  • Hervorragende Haltbarkeit: Hergestellt Aus Ausgewähltem Vernickeltem Kupfer Bietet Der Fitting Hervorragende Festigkeit Korrosionsbeständigkeit Und Lange Lebensdauer.
  • Hohe Druckbeständigkeit: Dieser Pneumatische Fitting Kann Starkem Druck Standhalten Ist Nicht Anfällig Für Auslösen Und Kann Stabil In Verschiedenen Umgebungen Arbeiten.

Wie Verwendet Man Es?
1. Drücken Sie Den 4mm Schlauch Einfach In Den Anschluss Des Fittings Bis Er Sicher Sitzt;
2. Schrauben Sie Das Ende Des Fittings In Den Entsprechenden Teil Ihres Pneumatischen Systems Und Ziehen Sie Es Bei Bedarf Mit Der Hand Oder Einem Werkzeug Fest;
3. Überprüfen Sie Auf Luftlecks Oder Lose Verbindungen Und Stellen Sie Sicher Dass Der Schlauch Korrekt Eingeführt Ist.

Worauf Sollte Ich Achten?
Bitte Stellen Sie Sicher Dass Sie Einen 4mm Schlauch Verwenden Um Einen Richtigen Sitz Zu Gewährleisten.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)