Haus Hand ToolsNutdriversBitFastener-Holding Nutdriver Bits
Harfington 2Pcs 1/2" Drive 12mm Thin Wall 6 Point Deep Impact Socket  8" Long CR-V Steel

2Pcs 1/2" Drive 12mm Thin Wall 6 Point Deep Impact Socket 8" Long CR-V Steel

ID:
€17,39 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 25%Rabatt
    Bestellung $5000+
  • 20%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
Über diesen Artikel
  • Size - Square Drive Size: 1/2 inch; 6 Point Socket Size: 12 mm; Total Length: 200 mm / 8 inch (extra long); Drive End Outer Diameter: 23 mm / 0.91 inch; Socket End Outer Diameter: 17.5 mm / 0.69 inch (Partially Thin Wall, Only the 6 point socket adopts thin-wall design.)
  • Material - Made from quality chromium vanadium (CR-V) steel, the socket has high hardness, good toughness for durability. The surface is treated with heat treatment and electroplating. Heat treatment can significantly improve the hardness and strength, making it less prone to deformation. Electroplated coating form a dense protective film, effectively isolating air, moisture, and corrosive substances.
  • Features - Thin-wall construction allows access to fasteners in tight or hard-to-reach spaces where a standard socket may not fit, making it great for tasks that require a compact socket wrench. 6-point opening can fit the hex fastener tightly and firmly, and can apply maximum torque. Radius corner design increases the contact surface to evenly distribute force to the flat surface of the fastener, preventing nuts and bolts from rounding off.
  • Applications - 6-point impact socket can be used to install, remove and repair fastening bolts, shaft nuts, bolts on cars, machines, household appliances, engines, etc., suitable for automobile maintenance, mechanical equipment repair, construction, carpentry, home repair, etc.. Used with 1/2-inch electric wrenches, ratchet wrenches, L wrenches, bent rods, etc.
  • Note - Make sure to select the correct size to match the fastener to prevent slipping or damage. Apply even pressure and grip the wrench firmly on the fastener to avoid stripping or rounding off the corners. Align the wrench properly with the fastener at the correct angle to ensure a secure fit and prevent slippage during operation.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • Size - Square Drive Size: 1/2 inch; 6 Point Socket Size: 12 mm; Total Length: 200 mm / 8 inch (extra long); Drive End Outer Diameter: 23 mm / 0.91 inch; Socket End Outer Diameter: 17.5 mm / 0.69 inch (Partially Thin Wall, Only the 6 point socket adopts thin-wall design.)
  • Material - Made from quality chromium vanadium (CR-V) steel, the socket has high hardness, good toughness for durability. The surface is treated with heat treatment and electroplating. Heat treatment can significantly improve the hardness and strength, making it less prone to deformation. Electroplated coating form a dense protective film, effectively isolating air, moisture, and corrosive substances.
  • Features - Thin-wall construction allows access to fasteners in tight or hard-to-reach spaces where a standard socket may not fit, making it great for tasks that require a compact socket wrench. 6-point opening can fit the hex fastener tightly and firmly, and can apply maximum torque. Radius corner design increases the contact surface to evenly distribute force to the flat surface of the fastener, preventing nuts and bolts from rounding off.
  • Applications - 6-point impact socket can be used to install, remove and repair fastening bolts, shaft nuts, bolts on cars, machines, household appliances, engines, etc., suitable for automobile maintenance, mechanical equipment repair, construction, carpentry, home repair, etc.. Used with 1/2-inch electric wrenches, ratchet wrenches, L wrenches, bent rods, etc.
  • Note - Make sure to select the correct size to match the fastener to prevent slipping or damage. Apply even pressure and grip the wrench firmly on the fastener to avoid stripping or rounding off the corners. Align the wrench properly with the fastener at the correct angle to ensure a secure fit and prevent slippage during operation.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
  1. Hergestellt Aus Hochwertigem Chrom-Vanadium (CR-V) Stahl Hat Die Dünnwandige Stecknuss Hohe Härte Und Gute Zähigkeit Für Langlebigkeit. Die Oberfläche Wurde Wärmebehandelt Und Galvanisch Beschichtet. Die Wärmebehandlung Kann Die Härte Und Festigkeit Deutlich Verbessern Und Macht Sie Weniger Anfällig Für Verformung Bei Hochintensiven Arbeiten. Die Galvanische Beschichtung Bildet Einen Dichten Schutzfilm Der Effektiv Luft Feuchtigkeit Und Korrosive Substanzen Isoliert Und Die Lebensdauer Deutlich Verlängert.
  2. Ihre Dünnwandige Bauweise Ermöglicht Den Zugang Zu Befestigungselementen In Engen Oder Schwer Zugänglichen Bereichen Wo Eine Standard Stecknuss Nicht Passt Was Sie Ideal Für Aufgaben Macht Die Eine Kompakte Stecknuss Erfordern. Das Dünnwandige Design Macht Den Schraubenschlüssel Auch Leichter Und Einfacher Zu Handhaben. (Teilweise Dünnwandig Nur Die 6-Kant Stecknuss Hat Dünnwandiges Design)
  3. Die 6-Kant Öffnung Kann Den Sechskant Befestiger Eng Und Fest Umschließen Und Verhindert So Das Abrutschen Oder Lockern Während Der Arbeit Sowie Die Anwendung Des Maximalen Drehmoments. Das Abgerundete Eckdesign Vergrößert Die Kontaktfläche Um Die Kraft Gleichmäßig Auf Die Flache Oberfläche Des Befestigers Zu Verteilen Und Verhindert
  4. Die 6-Kant Stecknuss Kann Zum Installieren Entfernen Und Reparieren Von Befestigungsschrauben Wellenmuttern Schrauben An Autos Maschinen Haushaltsgeräten Motoren Etc. Verwendet Werden Und Ist Geeignet Für Autoreparaturen Maschineninstandsetzung Bauarbeiten Tischlerarbeiten Hausreparaturen Etc. Kann Mit 1/2 Zoll Elektrischen Schraubenschlüsseln Ratsche Schraubenschlüsseln L Schraubenschlüsseln Krummen Stangen Etc. Verwendet Werden.
  5. Hinweis: Gleichmäßigen Druck Ausüben Und Den Schraubenschlüssel Fest Auf Den Befestiger Aufsetzen Um Das Abstreifen Oder Abrunden Der Ecken Zu Vermeiden.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€17,39 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 25%Rabatt
    Bestellung $5000+
  • 20%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

  1. Hergestellt Aus Hochwertigem Chrom-Vanadium (CR-V) Stahl Hat Die Dünnwandige Stecknuss Hohe Härte Und Gute Zähigkeit Für Langlebigkeit. Die Oberfläche Wurde Wärmebehandelt Und Galvanisch Beschichtet. Die Wärmebehandlung Kann Die Härte Und Festigkeit Deutlich Verbessern Und Macht Sie Weniger Anfällig Für Verformung Bei Hochintensiven Arbeiten. Die Galvanische Beschichtung Bildet Einen Dichten Schutzfilm Der Effektiv Luft Feuchtigkeit Und Korrosive Substanzen Isoliert Und Die Lebensdauer Deutlich Verlängert.
  2. Ihre Dünnwandige Bauweise Ermöglicht Den Zugang Zu Befestigungselementen In Engen Oder Schwer Zugänglichen Bereichen Wo Eine Standard Stecknuss Nicht Passt Was Sie Ideal Für Aufgaben Macht Die Eine Kompakte Stecknuss Erfordern. Das Dünnwandige Design Macht Den Schraubenschlüssel Auch Leichter Und Einfacher Zu Handhaben. (Teilweise Dünnwandig Nur Die 6-Kant Stecknuss Hat Dünnwandiges Design)
  3. Die 6-Kant Öffnung Kann Den Sechskant Befestiger Eng Und Fest Umschließen Und Verhindert So Das Abrutschen Oder Lockern Während Der Arbeit Sowie Die Anwendung Des Maximalen Drehmoments. Das Abgerundete Eckdesign Vergrößert Die Kontaktfläche Um Die Kraft Gleichmäßig Auf Die Flache Oberfläche Des Befestigers Zu Verteilen Und Verhindert
  4. Die 6-Kant Stecknuss Kann Zum Installieren Entfernen Und Reparieren Von Befestigungsschrauben Wellenmuttern Schrauben An Autos Maschinen Haushaltsgeräten Motoren Etc. Verwendet Werden Und Ist Geeignet Für Autoreparaturen Maschineninstandsetzung Bauarbeiten Tischlerarbeiten Hausreparaturen Etc. Kann Mit 1/2 Zoll Elektrischen Schraubenschlüsseln Ratsche Schraubenschlüsseln L Schraubenschlüsseln Krummen Stangen Etc. Verwendet Werden.
  5. Hinweis: Gleichmäßigen Druck Ausüben Und Den Schraubenschlüssel Fest Auf Den Befestiger Aufsetzen Um Das Abstreifen Oder Abrunden Der Ecken Zu Vermeiden.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)