Haus Electrical & LightingSwitching & ControllingElectric ThermostatCapillary Thermostat
Harfington 5 Pcs KSD9700 Thermostat 100°C/212°F Normally Close Temperature Switch Thermal Protector N.C 10A 250V Plastic Temperature Controller

5 Pcs KSD9700 Thermostat 100°C/212°F Normally Close Temperature Switch Thermal Protector N.C 10A 250V Plastic Temperature Controller

ID:
€8,68 Normaler Preis
/
Großhandelspreis
35%Rabatt
Bestellung $5000+
  • 35%Rabatt
    Bestellung $5000+
  • 25%Rabatt
    Bestellung $2000+
  • 15%Rabatt
    Bestellung $800+
  • 10%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
Über diesen Artikel
  • This is a KSD9700 Normally Closed (NC) Temperature Control Switch, designed for precise thermal protection and regulation in electrical appliances and equipment. It automatically opens the circuit when temperature rises beyond the set point and closes it once cooling occurs, ensuring safe operation. Great for motors, washing machines, air conditioners, fans, induction cookers, and other small household or industrial devices requiring reliable temperature management.
  • Product Name:KSD9700 Thermostat;Action Temperature:100°C/212°F;Action Type:N.C (Normal Close);Power:10A 250V;Pin Type:2 Wires;Body Material:Plastic;Total length x height:90x4mm/3.54x0.16inch;Package Content :5 Pcs x KSD9700 Thermostat;
  • KSD9700 temperature controller has the characteristics of small size, quick action, accurate temperature control, large current control and long service life.Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature.Suitable for both temperature protection and automated control systems.
  • Mount the switch in the target area (e.g., motor housing, appliance chassis) using screws or clips, ensuring direct contact with the heat source,Connect the terminals to the circuit according to the device’s wiring diagram.The switch operates automatically: it disconnects the circuit when overheating is detected and connects once temperatures normal.After installation, test the switch by gradually heating the monitor area to verify activation accuracy.
  • Never collapse or deform the plastic or metal shell so as not to affect the performance.It is not suitable for air temperature sensing, only applies to contact sensing.Metal shell case is conductive which needs to be used with the insulating sleeve.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • This is a KSD9700 Normally Closed (NC) Temperature Control Switch, designed for precise thermal protection and regulation in electrical appliances and equipment. It automatically opens the circuit when temperature rises beyond the set point and closes it once cooling occurs, ensuring safe operation. Great for motors, washing machines, air conditioners, fans, induction cookers, and other small household or industrial devices requiring reliable temperature management.
  • Product Name:KSD9700 Thermostat;Action Temperature:100°C/212°F;Action Type:N.C (Normal Close);Power:10A 250V;Pin Type:2 Wires;Body Material:Plastic;Total length x height:90x4mm/3.54x0.16inch;Package Content :5 Pcs x KSD9700 Thermostat;
  • KSD9700 temperature controller has the characteristics of small size, quick action, accurate temperature control, large current control and long service life.Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature.Suitable for both temperature protection and automated control systems.
  • Mount the switch in the target area (e.g., motor housing, appliance chassis) using screws or clips, ensuring direct contact with the heat source,Connect the terminals to the circuit according to the device’s wiring diagram.The switch operates automatically: it disconnects the circuit when overheating is detected and connects once temperatures normal.After installation, test the switch by gradually heating the monitor area to verify activation accuracy.
  • Never collapse or deform the plastic or metal shell so as not to affect the performance.It is not suitable for air temperature sensing, only applies to contact sensing.Metal shell case is conductive which needs to be used with the insulating sleeve.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Was Ist Dies?
Dies Ist Ein KSD9700 Normal Geschlossener (NC) Temperaturschalter Zur Präzisen Wärmeregulierung Und Abschaltung In Elektrogeräten Und Ausrüstung. Er Unterbricht Den Stromkreis Automatisch Bei Überschreiten Der Eingestellten Temperatur Und Schließt Ihn Wieder Bei Abkühlung Für Sicheren Betrieb. Ideal Für Motoren Waschmaschinen Klimaanlagen Ventilatoren Induktionskochfelder Und Andere Haushalts- Oder Industriegeräte Mit Zuverlässiger Temperaturkontrolle.

Was Bekomme Ich?

Produktname:KSD9700 Thermostat;
Aktionstemperatur:100°C/212°F;
Aktionstyp:N.C (Normal Geschlossen);
Leistung:10A 250V;
Anschlusstyp:2 Drähte;
Gehäusematerial:Kunststoff;
Gesamtlänge X Höhe:90x4mm/3.54x0.16Zoll;
Packungsinhalt:
5 Stück X KSD9700 Thermostat;


Welche Vorteile Hat Das Produkt?

Der KSD9700 Temperaturregler Zeichnet Sich Durch Kompakte Bauweise Schnelles Ansprechen Präzise Temperaturkontrolle Hohe Strombelastbarkeit Und Lange Lebensdauer Aus. Normal Geschlossen: Der Kontakt Ist Im Ursprünglichen Zustand Geschlossen Und Öffnet Bei Überschreiten Der Nenntemperatur.

Wie Wird Es Verwendet?

Befestigen Sie Den Schalter Im Zielbereich (Z.B. Motorgehäuse Gerätechassis) Mit Schrauben Oder Klammern Und Stellen Sie Direkten Kontakt Zur Wärmequelle Her. Verbinden Sie Die Anschlüsse Gemäß Schaltplan Des Geräts. Der Schalter Arbeitet Automatisch: Er Trennt Den Stromkreis Bei Überhitzung Und Schließt Ihn Bei Normaler Temperatur Wieder.

Was Sollte Ich Beachten?

Verformen Sie Nicht Das Kunststoff- Oder Metallgehäuse Da Dies Die Funktion Beeinträchtigen Kann. Nicht Zur Lufttemperaturmessung Geeignet Nur Für Kontaktsensierung. Metallgehäuse Sind Leitfähig Und Müssen Mit Isolierhülse Verwendet Werden.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€8,68 Normaler Preis
/
Großhandelspreis
35%Rabatt
Bestellung $5000+
  • 35%Rabatt
    Bestellung $5000+
  • 25%Rabatt
    Bestellung $2000+
  • 15%Rabatt
    Bestellung $800+
  • 10%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Was Ist Dies?
Dies Ist Ein KSD9700 Normal Geschlossener (NC) Temperaturschalter Zur Präzisen Wärmeregulierung Und Abschaltung In Elektrogeräten Und Ausrüstung. Er Unterbricht Den Stromkreis Automatisch Bei Überschreiten Der Eingestellten Temperatur Und Schließt Ihn Wieder Bei Abkühlung Für Sicheren Betrieb. Ideal Für Motoren Waschmaschinen Klimaanlagen Ventilatoren Induktionskochfelder Und Andere Haushalts- Oder Industriegeräte Mit Zuverlässiger Temperaturkontrolle.

Was Bekomme Ich?

Produktname:KSD9700 Thermostat;
Aktionstemperatur:100°C/212°F;
Aktionstyp:N.C (Normal Geschlossen);
Leistung:10A 250V;
Anschlusstyp:2 Drähte;
Gehäusematerial:Kunststoff;
Gesamtlänge X Höhe:90x4mm/3.54x0.16Zoll;
Packungsinhalt:
5 Stück X KSD9700 Thermostat;


Welche Vorteile Hat Das Produkt?

Der KSD9700 Temperaturregler Zeichnet Sich Durch Kompakte Bauweise Schnelles Ansprechen Präzise Temperaturkontrolle Hohe Strombelastbarkeit Und Lange Lebensdauer Aus. Normal Geschlossen: Der Kontakt Ist Im Ursprünglichen Zustand Geschlossen Und Öffnet Bei Überschreiten Der Nenntemperatur.

Wie Wird Es Verwendet?

Befestigen Sie Den Schalter Im Zielbereich (Z.B. Motorgehäuse Gerätechassis) Mit Schrauben Oder Klammern Und Stellen Sie Direkten Kontakt Zur Wärmequelle Her. Verbinden Sie Die Anschlüsse Gemäß Schaltplan Des Geräts. Der Schalter Arbeitet Automatisch: Er Trennt Den Stromkreis Bei Überhitzung Und Schließt Ihn Bei Normaler Temperatur Wieder.

Was Sollte Ich Beachten?

Verformen Sie Nicht Das Kunststoff- Oder Metallgehäuse Da Dies Die Funktion Beeinträchtigen Kann. Nicht Zur Lufttemperaturmessung Geeignet Nur Für Kontaktsensierung. Metallgehäuse Sind Leitfähig Und Müssen Mit Isolierhülse Verwendet Werden.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)