Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Haus Automobiles & MotorcyclesReplacement PartsWindshield Wipers & WashersWindshield Washer Pumps

Windshield Washer Pump Motor for SAAB 9-3 12826943 2004 2005 2006 2007 2008 2009 2010 2011 2012

45808684204281
Fragen & Antworten |
€25,95 Normaler Preis
/
Über diesen Artikel
  • Part Number: 12826943
  • Fit for SAAB 9-3 2004-2012
  • Great Replacement - to give the needed power to bring the windshield fluid to the window
  • To push fluid through the washer nozzle out onto your windshield to wash away the dirt
  • Package Includes: 1 pc windshield washer pump
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20
Über diesen Artikel
  • Part Number: 12826943
  • Fit for SAAB 9-3 2004-2012
  • Great Replacement - to give the needed power to bring the windshield fluid to the window
  • To push fluid through the washer nozzle out onto your windshield to wash away the dirt
  • Package Includes: 1 pc windshield washer pump
Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Description: 
  • Fit the line to the washer nozzles (the discharge line).
  • Great Replacement for Failed Pump - to give the needed power to bring the windshield fluid to the window
  • To push fluid through the washer nozzle out onto your windshield to wash away the dirt
  • This is non-OEM product.
How to Replace FYI:
1. apply parking brake, turn the front wheel all the way to the left, turn off vehicle and remove keys from ignition
2. remove Phillips screws in wheel well lagging to get access to washer tank
3. took an old plastic cutting board (thin flexible plastic) and fold into a U shape and place under washer pump/tank area, other end in bucket. If the tank is not drained, all but an inch of fluid will drain out when you pull the pump.
4. disconnect electrical connector, tuck out of the way.
5. tilt pump forward to free it from the top clip and pull it upwards out of the tank. you may have to pull the grommet to remove; washer fluid from tank ran down through "U" catch and into bucket.
6. remove hose from old pump, snip off 1/4 inch of the end that is deformed and brittle and attached to new pump.
7. insert new pump into washer tank and wipe up any fluid drips on / around tank.
8. attach electrical connector
9. turned on car, test pump; turn off car, remove keys from ignition.
10. replace wheel well lagging and Phillips screws.
11. refill washer tank, clean up work area.

Specification: 
  • Color: Black,White
  • Material: Plastic
  • Part Number: 12826943
  • Size: 13x5x6cm / 5.12"x1.97"x2.36"(L*W*H)
  • Pin Number: 2
Fit for:
  • for SAAB 9-3 2004-2012
Package Included: 
  • 1 x Windscreen Washer Pump
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Beschreibung

Beschreibung

Description: 
  • Fit the line to the washer nozzles (the discharge line).
  • Great Replacement for Failed Pump - to give the needed power to bring the windshield fluid to the window
  • To push fluid through the washer nozzle out onto your windshield to wash away the dirt
  • This is non-OEM product.
How to Replace FYI:
1. apply parking brake, turn the front wheel all the way to the left, turn off vehicle and remove keys from ignition
2. remove Phillips screws in wheel well lagging to get access to washer tank
3. took an old plastic cutting board (thin flexible plastic) and fold into a U shape and place under washer pump/tank area, other end in bucket. If the tank is not drained, all but an inch of fluid will drain out when you pull the pump.
4. disconnect electrical connector, tuck out of the way.
5. tilt pump forward to free it from the top clip and pull it upwards out of the tank. you may have to pull the grommet to remove; washer fluid from tank ran down through "U" catch and into bucket.
6. remove hose from old pump, snip off 1/4 inch of the end that is deformed and brittle and attached to new pump.
7. insert new pump into washer tank and wipe up any fluid drips on / around tank.
8. attach electrical connector
9. turned on car, test pump; turn off car, remove keys from ignition.
10. replace wheel well lagging and Phillips screws.
11. refill washer tank, clean up work area.

Specification: 
  • Color: Black,White
  • Material: Plastic
  • Part Number: 12826943
  • Size: 13x5x6cm / 5.12"x1.97"x2.36"(L*W*H)
  • Pin Number: 2
Fit for:
  • for SAAB 9-3 2004-2012
Package Included: 
  • 1 x Windscreen Washer Pump
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Spezifikation

Spezifikation

{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .
Eine Frage stellen
{[failedMsg]}
Hinweise: Bei Fragen zu Ihrer Bestellung, Produktrabatt, Lieferzeit, Versand, Zahlung und anderen Fragen, die nicht mit dem Produkt zusammenhängen, wenden Sie sich bitte an den Kundendienst .
Eine Frage stellen
{[answerFailedMsg]}

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)