Haus HandwerkzeugeSchraubenschlüsselDie Wrenche Set
Harfington Runder Schneideisengriff-Schlüsselsatz Gewindeschneideisen und Schneideisenhalter

Runder Schneideisengriff-Schlüsselsatz Gewindeschneideisen und Schneideisenhalter

ID:
€11,95 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 20%Rabatt
    Bestellung $5000+
  • 15%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
1set
Größe
#6-32
Packungsinhalt
Über diesen Artikel
  • Die & Wrench Set: Die Wrench: 20mm x 5mm die stock fits 11mm-20mm outside diameter die / M3-M4 thread die, with 4 adjustable screws Round Die: #6-32 UNC threading die with 20mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
  • Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
  • Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • Die & Wrench Set: Die Wrench: 20mm x 5mm die stock fits 11mm-20mm outside diameter die / M3-M4 thread die, with 4 adjustable screws Round Die: #6-32 UNC threading die with 20mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
  • Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
  • Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Specifications:
Round Die: Thread Size: 6-32 UNC; Outside Diameter (OD): 20mm / 0.79"; Thickness: 5mm / 0.2"; Accuracy class: 6g; Material: Alloy Tool Steel
Die Stock: Size: 20mm x 5mm / 0.79" x 0.2" (D*H); Fit Capacity: 11mm-20mm (M3-M4); Overall Length: 180mm / 7.09"; Handle Diameter: 6.8mm / 0.27"; Material: Cast Iron

Descriptions:
Round dies are suitable for general purpose threading. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic. Suitable for mild steel, aluminum, stainless steel, iron, cast iron, alloy steel and carbon steel. Good for maintenance and repair work.
The die stock is suited for 20mm outside diameter round dies. Provides good wear resistance for long service life. With four adjustable screws, the die stock can securely hold round dies and is easy to operate.
The die and wrench set can improve the efficiency of processing threads, and is a necessary tool for hand tapping operation.

Package Included:
1 x Die Stock Handle Wrench, 1 x Round Die
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€11,95 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 20%Rabatt
    Bestellung $5000+
  • 15%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Specifications:
Round Die: Thread Size: 6-32 UNC; Outside Diameter (OD): 20mm / 0.79"; Thickness: 5mm / 0.2"; Accuracy class: 6g; Material: Alloy Tool Steel
Die Stock: Size: 20mm x 5mm / 0.79" x 0.2" (D*H); Fit Capacity: 11mm-20mm (M3-M4); Overall Length: 180mm / 7.09"; Handle Diameter: 6.8mm / 0.27"; Material: Cast Iron

Descriptions:
Round dies are suitable for general purpose threading. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic. Suitable for mild steel, aluminum, stainless steel, iron, cast iron, alloy steel and carbon steel. Good for maintenance and repair work.
The die stock is suited for 20mm outside diameter round dies. Provides good wear resistance for long service life. With four adjustable screws, the die stock can securely hold round dies and is easy to operate.
The die and wrench set can improve the efficiency of processing threads, and is a necessary tool for hand tapping operation.

Package Included:
1 x Die Stock Handle Wrench, 1 x Round Die
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)