Haus Heimwerken3D-Druckerzubehör3D-Druckerdüse
Harfington Uxcell 5Stück 0,4mm 3D Drucker Düsen Kopf M7 Gewinde Ersatz für MK10 1,75mm Extruder Druck Messingdüsen

Uxcell 5Stück 0,4mm 3D Drucker Düsen Kopf M7 Gewinde Ersatz für MK10 1,75mm Extruder Druck Messingdüsen

ID:
€9,84 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 20%Rabatt
    Bestellung $5000+
  • 15%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
Über diesen Artikel
  • [Größe]: Gewinde: M7; Düsendurchmesser: 0,4 mm; Eingangsdurchmesser: 4 mm; Gesamtabmessung: 13 x 9 mm / 0,5 "x 0,35" (L * D)
  • [Kompatibilität]: Kompatibel mit 1,75mm Filament MK10 3D Druckern.
  • [Messingmaterial]: Nicht leicht zu verrosten lassen oder erodieren, bietet lange Lebensdauer.
  • [Glatte Oberfläche]: Die glatte Kontaktoberfläche kann gut mit dem anderen Kopf des heißen Endes verbunden werden, um Ausschwitzen zu vermeiden und einen glatten und sauberen Druck zu erzielen.
  • [Anwendung]: Geeignet für die meisten nicht abrasiven Materialien wie PLA, ABS, Nylon, TPE, TPU, PC usw.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • [Größe]: Gewinde: M7; Düsendurchmesser: 0,4 mm; Eingangsdurchmesser: 4 mm; Gesamtabmessung: 13 x 9 mm / 0,5 "x 0,35" (L * D)
  • [Kompatibilität]: Kompatibel mit 1,75mm Filament MK10 3D Druckern.
  • [Messingmaterial]: Nicht leicht zu verrosten lassen oder erodieren, bietet lange Lebensdauer.
  • [Glatte Oberfläche]: Die glatte Kontaktoberfläche kann gut mit dem anderen Kopf des heißen Endes verbunden werden, um Ausschwitzen zu vermeiden und einen glatten und sauberen Druck zu erzielen.
  • [Anwendung]: Geeignet für die meisten nicht abrasiven Materialien wie PLA, ABS, Nylon, TPE, TPU, PC usw.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:


Feature:

Stamp size on surface, convenient to pick the one you need.

The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.


Specification:

Material: Brass

Screw Thread: M7

Nozzle Diameter: 0.4mm


Input Diameter: 4mm

Total Dimension: 13x9mm / 0.5x0.35 inch (L*D)


Package Content:

5 x Brass Nozzle


NOTE:

Small accessories, please keep away from
children
.

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.


How to Replace Nozzles?

1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid burning.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€9,84 Normaler Preis
/
Großhandelspreis
20%Rabatt
Bestellung $5000+
  • 20%Rabatt
    Bestellung $5000+
  • 15%Rabatt
    Bestellung $2000+
  • 10%Rabatt
    Bestellung $800+
  • 7%Rabatt
    Bestellung $500+
  • 5%Rabatt
    Bestellung $200+
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung


Feature:

Stamp size on surface, convenient to pick the one you need.

The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.


Specification:

Material: Brass

Screw Thread: M7

Nozzle Diameter: 0.4mm


Input Diameter: 4mm

Total Dimension: 13x9mm / 0.5x0.35 inch (L*D)


Package Content:

5 x Brass Nozzle


NOTE:

Small accessories, please keep away from
children
.

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.


How to Replace Nozzles?

1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid burning.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'NL').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)